• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.375-382
• /
• 2015

The dome and neck part of a vessel is generally formed by a hot spinning process with a seamless tube. However, as studies on and design data from the hot spinning process are insufficient, this process has been performed based on trial and error and the experiences of field engineers. Changes in the inner diameter from the bottom to the top of the neck have occurred mainly because of the characteristics of the hot spinning process due to the high-speed rotation of the rollers. In this study, a theoretical and finite element analysis of the vessel is conducted with different material(Cr-13)-supplemented screw threads for tapping and to reduce shape errors. Based on the results, tne structural safety under the operating conditions is evaluated.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.88-88
• /
• 2001

소 난포란을 체외에서 성숙, 수정시킨 후, 2~8 세포기 수정란을 체외배양액인 CR$_1$aa에 일정량의 nitric oxide scavenger, Hb와, inhibitor인 L-nitro - L- arginine methyl ester (L-NAME)를 첨가 배양하여 체외발육에 미치는 영향을 검토하고자 실시하였다. 체외수정 후 체외배양 48시간에 난구세포의 제거 유.무에 따라 CR$_1$aa 배양액에 hemoglobin을 0, 1, 5$\mu\textrm{g}$/$m\ell$를 첨가한 구의 상실배기이상 체외발육성적은 난구세포를 제거한 구에서 23.8%, 33.3% 및 26.8%였으며, 난구세포를 제거하지 않은 구에서는 각각 39.5%, 54.8% 및 48.8%로써 난구세포를 제거하지 않은 구에 Hb를 1$\mu\textrm{g}$/$m\ell$를 첨가한 구가 여타구 보다 통계적으로 높은 결과를 얻었다(P<0.05). 체외수정 후 체외배양 96시간 후 난구세포를 제거 유.무에 따라 Hb를 0, 1, 5$\mu\textrm{g}$/$m\ell$를 첨가하였을 때, 상실배기 이상 체외발육성적은 난구세포를 제거한 구에서 각각 28.6%, 46.2% 및 39.1%였으며, 난구세포를 제거하지 않은 구에서는 각각 33.9%, 67.2% 및 46.0%로써, 난구세포를 제거하지 않은 구에 Hb를 1$\mu\textrm{g}$/$m\ell$첨가구가 여타구에 비해 통계적으로 유의하게 높게 나타났다( P<0.05).CR$_1$aa배양액에 L-NAME를 0, 10, 50 및 100mM을 첨가한 구에서 상실배이상 발육된 체외발육성적은 각각 55.6%, 64.9%, 58.8% 및 66.7%로써 L-NAME 첨가구가 무첨가구에 비해 커다란 차이가 나타나지 않았다(P>0.05). 본 실험의 결과로 볼 때, nitric oxide scavenger인 hemoglobin의 첨가는 체외수정 후 체외배양 96시간에 1$\mu\textrm{g}$/$m\ell$ 첨가하는 것이 체외수정란의 체외 발육율을 향상시켰으며, nitric oxide inhibitor인 L-NAME는 첨가 농도에 관계없이 체외수정란의 체외발육율에 영향을 미치지 않는 것으로 나타났다. 본 실험에서 생산된 배반포기 체외수정란의 세포수에는 커다란 차이가 인정되지 않았다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.171-177
• /
• 2002

In this study, the vertical aligned carbon nanotubes was synthesized by DC bias-assisted Inductively Coupled Plasma Hot-Filament Chemical Vapor Deposition (ICPHFCVD). The substrate used CNTs growth was Ni(300 ${\AA}$)/Cr(200 ${\AA}$)-deposited one on glass by RF magnetron sputtering. R-F, DC bias and filament power during the growth process were 150 W, 80 W, 7∼8 A, respectively. The grown CNTs showed hollow structure and multi-wall CNTs. The top of grown CNT was found to Ni-tip that the CNT end showed to metaltip. The graphitization and field emission properties of grown was better than grown CNTs by ICPCVD. The turn-on voltage of CNT grown by DC bias-assisted ICPHFCVD showed about 3 V/${\mu}m$.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.39-48
• /
• 2003

The removal of chromate from aqueous solution using finely ground pyrite and biotite was investigated by batch experiments and the kinetics and the mechanism of chromate reduction were discussed. The chromate reduction by pyrite was about hundred times faster than that by biotite and was also faster at pH 3 than at pH 4. When pyrite was used, more than 90% of initial chromate was reduced within four hours at pH 4 and within 40 min. at pH 3. However, more than 400 hours was taken for the reduction of 90% of initial chromate by biotite. The results indicate that the rate of chromate reduction was strongly depending on the amount of Fe(II) in the minerals and on the dissolution rate of Fe(II) from the minerals. The reduction of chromate at pH 4 resulted in the precipitation of (Cr, Fe)(OH))$_3$$_{ (s)}$, which is believed to have limited the concentrations of dissolved Cr(III) and Fe(III) to less than expected values. When biotite was used, amounts of decreased Fe(II) and reduced Cr(Ⅵ) did not show stoichiometric relationship, which implying there was not only chromate reduction by ferrous ions in the acidic solution but also heterogeneous reduction of ferric ions by the structural ferrous iron in biotite. However, the results from a series of the experiments using Pyrite showed that concentrations of the decreased Fe(II) and the reduced Cr(Ⅵ) were close to the stoichiometric ratio of 3:1. It was because the oxidation of pyrite rapidly created ferrous ions even in oxygenated solutions and the chromate reduction by the ferrous ions was significantly faster than ferrous ion oxygenation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.2
• /
• pp.9-25
• /
• 2020

In 2010 and 2015, total 77 surface sediment samples were collected to assess the anthropogenic effects of trace metals in surface sediments of Garolim Bay, and the physical characteristics (particle size and specific surface area) and geochemical components (major (Al, Ca, Fe, K, Ba) and trace metals (Mn, Cs, Cr, Co, Ni, Cu, Zn, Pb), organic carbon and calcium carbonate) were analyzed. Mean grain size of Garolim Bay surface sediments ranged from 0.51-5.58 Ø (mean 3.98 Ø) and increased from the inlet of bay to the inner bay, and from the waterway to the land. Most of the metal concentrations except for some elements showed the similar distribution to those of mean grain size and specific surface area. As the particle size decreased and the specific surface area increased, the metal concentration increased. In order to estimate the factors controlling the concentration of trace metals, factor analysis was performed, and three factors were extracted (92.7% of the total variation). Factor 1 accounted for 71.3% of the total variation, which was a grain size factor. Factor 2 accounted for 14.2% of the total variation, Factor 3 accounted for 7.2% of the total variance. Enrichment factor was calculated using the particle size corrected background concentration. Metals with a enrichment factor of 1.5 or higher and the number of samples were 4 for Cr (St. 1, 16, 27, 39) and 1 for Pb (St. 39), but there were little differences in the concentrations of 1M HCl leached metals for these metals. The percentage of 1M HCl leached fraction to total metal concentration decreased in the order of Pb~Co>Cu>Zn~Mn>Ni>Cr. Comparing this value with contaminated and clean sediments in other coastal areas, the percentages for each metal were similar regardless of the trace metal levels in all regions. This fact might be resulted from the reaction between the 1M HCl solution and the different sediment constituents, indicating that there is a limit to apply this percentage of leached metal to the estimation of the contamination extent.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.99-104
• /
• 2010

The purpose of this study is to develop Sewage Treatment Plant that treat sewage which occurred in ship using fixed media method and to consider applicable to the Pilot Scale device of the STP regulations in MLTM(Ministry of Land, Transport and Maritime Affairs) and MEPC(Marine Environment Protection Committee). In test results, pH geometric mean was 7.68, $BOD_5$(Biochemical Oxygen Demand) geometric mean was 7.28 mg/l, $COD_{cr}$(Chemical Oxygen Demand) geometric mean was 48.39 mg/l, TSS(Total Suspended Solid) geometric mean was 18.00/l, Residual chlorine geometric mean was 0.19 mg/l, and E. coli geometric mean was 1CFU/100 ml. In addition, about 97.4% of $BOD_5$ was reduced, the $COD_{cr}$ reduction averaged 96.4%and the TSS reduction averaged 97.6%. STP have been determined by the MLTM and MEPC regulation of the marine pollution prevention equipment for performance testing product.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.943-948
• /
• 2003

The microstructure and electrical characteristics of Zn-Pr-Co-Cr-Dy oxides-based varistors were investigated with Dy$_2$ $O_3$ content in the range of 0.0∼2.0 ㏖%. As Dy$_2$ $O_3$ content is increased, the average grain size was decreased in the range of 18.2∼4.6 $\mu\textrm{m}$ and the ceramic density was decreased in the range of 5.49∼4.64 g/㎤. The incorporation of Dy$_2$ $O_3$ markedly enhanced the nonlinear properties of varistors more than 9 times in nonlinear exponent, compared with the varistor without Dy$_2$ $O_3$ The varistor with 0.5∼1.0 ㏖% Dy$_2$ $O_3$ exhibited the high nonlinearity, in which the nonlinear exponent is above 55 and the leakage current is below 1.0 ${\mu}\textrm{A}$. The donor concentration and the density of interface states were decreased in the range of (4.66∼0.25)${\times}$10$\^$18//㎤ and (5.70∼1.39)${\times}$10$\^$12//$\textrm{cm}^2$, respectively, with increasing Dy$_2$ $O_3$ content. The minimum dielectric dissipation factor of 0.0023 was obtained for 0.5 ㏖% Dy$_2$ $O_3$, but further addition of Dy$_2$ $O_3$ increased it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.267-274
• /
• 2019

To investigate the effect of high-intensity interval training (HIIT) on the outcomes of cardiac rehabilitation(CR) in elderly and younger patients with myocardial infarction(MI). Of the MI patients who received hospital-based CR from 2015 to 2017, we retrospectively reviewed the medical records of the patients who continued follow-up through the outpatient clinic. A total of 39 patients (20 elderly patients (${\geq}60year$($64.1{\pm}3.6$)) and 19 younger patients (< 60 year($55.6{\pm}2.3$)) was included in this study. The HIIT program was composed of 10 minutes of warm-up, 30 minutes of interval aerobic exercise, and 10 minutes of cool down. The aerobic exercise based on their initial exercise tolerance test outcome consisted of 3-minute usual intensity phase (60-70% of heart rate/VO2 reserve) and 4-minute of high-intensity phase (70-90% of heart rate/VO2 reserve). Exercise capacity was measured by exercise tests before and after hospital- based CR. Before CR, elderly group had a significantly lower exercise capacity in Exercise time, peak VO2, METs, Anaerobic threshold, VEmax, 02pulse than younger group. Both group showed similar improvement of cardiopulmonary exercise capacity after CR. And HIIT is safe and effective in elderly patients. It is considered necessary to further expansion for the participation of high intensity interval training in elderly patients.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.3
• /
• pp.32-39
• /
• 2009

This study was conducted in order to get the scientific background for soil pollution criteria. The 92 soil samples derived from various geological units were taken and analyzed to survey natural heavy metal background levels using aqua regia digestion method and 0.1N HCl extraction method. From these results, the average natural contents of metals were 0.287 mg/kg for Cd, 15.26 mg/kg for Cu, 18.43 mg/kg for Pb, 25.36 mg/kg for Cr, 54.27 mg/kg for Zn, 17.68 mg/kg for Ni, 6.83 mg/kg for As by the aqua regia method, and 0.040 mg/kg for Cd, 0.48 mg/kg for Cu, 3.06 mg/kg for Pb, 0.09 mg/kg for Cr, 1.54 mg/kg for Zn, 0.27 mg/kg for Ni, 0.089 mg/kg for As by the 0.1N HCl extraction method. Ratios of soluble contents and total contents were Cd 0.14, Cu 0.03, Pb 0.17, Cr 0.004, Zn 0.03, Ni 0.02, As 0.013 and the correlation coefficients of soluble contents and total contents were 0.24(As), 0.88(Cd), 0.43(Cr), 0.65(Cu), 0.70(Pb), 0.61(Ni), 0.24(Zn). The correlation factor decreased in the order of Cd > Pb > Cu > Ni > Cr > Zn $\approx$ As.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.1
• /
• pp.31-39
• /
• 1999

In the present study, oxidation behavior of 304 and 316 stainless steels was investigated. After solution treatment, specimens were polished up to $1{\mu}m$ $Al_2O_3$ grade and then subjected to oxidation treatment in dry air. The range of temperature was used for oxidation treatment at $300^{\circ}C{\sim}500^{\circ}C$ and TEM was used for analyzing the components and structure of oxide film. Also, these results were compared with the results of ESCA and TG. According to the results of TEM analysis, it was found that Cr oxide film was formed on top of the surface after room temperature oxidation but amorphous Fe oxide was formed on top of the surface and polycrystalline $(Cr,Fe)_2O_3$ was formed below the amorphous Fe oxide layer after $500^{\circ}C$ oxidation treatment. The oxidized specimens at $500^{\circ}C$ showed that 316 stainless steel resists more strongly to grain and grain boundary oxidation than 304 stainless steel. These results suggested that Mo component resolved in 316 stainless steel matrix suppressed the formation of Cr carbide which may results in local Cr deplete area.