• 제목/요약/키워드: CR contraction

검색결과 16건 처리시간 0.023초

CR MANIFOLDS OF ARBITRARY CODIMENSION WITH A CONTRACTION

  • Kim, Sung-Yeon
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제17권2호
    • /
    • pp.157-165
    • /
    • 2010
  • Let (M,p) be a germ of a $C^{\infty}$ CR manifold of CR dimension n and CR codimension d. Suppose (M,p) admits a $C^{\infty}$ contraction at p. In this paper, we show that (M,p) is CR equivalent to a generic submanifold in $\mathbb{C}^{n+d}$ defined by a vector valued weighted homogeneous polynomial.

DOMAINS WITH Ck CR CONTRACTIONS

  • Kim, Sung-Yeon
    • 충청수학회지
    • /
    • 제23권1호
    • /
    • pp.11-27
    • /
    • 2010
  • Let $\Omega$ be a domain with smooth boundary in ${\mathbb{C}}^{n+1}$ and let $p{\in}{\partial}{\Omega}$. Suppose that $\Omega$ is Kobayashi hyperbolic and p is of Catlin multi-type ${\tau}=({\tau}_0,{\ldots},{\tau}_n)$. In this paper, we show that $\Omega$ admits a $C^{k}$ contraction at p with $k{\geq}\mid{\tau}\mid+1$ if and only if $\Omega$ is biholomorphically equivalent to a domain defined by a weighted homogeneous polynomial.

작업형태 및 최대 수의적 수축에 따른 등척성 근지구력에 관한 연구 (The Study of Isometric Endurance Time by Task Type and Maximum Voluntary Contraction)

  • 심정훈;이상도
    • 대한인간공학회지
    • /
    • 제22권2호
    • /
    • pp.57-69
    • /
    • 2003
  • This study was performed to investigate the isometric endurance time as percentages of maximum voluntary contraction. Electromyogram(EMG) and Borg's CR-I0 value were measured by push-pull-up-down tasks for 10 healthy males. The normalized EMG value and the MPF(mean power frequency) were used to estimate the muscle recruitment pattern and the development of muscle fatigue. The subjects exerted and maintained 5 levels of %MVC(maximum voluntary contraction) in $90^{\circ}$ shoulder flexion/ 180oelbow extension at sitting posture. The up-task showed the lower endurance time and higher Borg's CR-I0 value than the other task types. Comparing Rohmert's curve with the endurance time of task types. Rohmert's curve overestimated the endurance time of up-task and underestimated the endurance time of push-pull-down tasks. The normalized EMG value showed that muscles recruitment patterns were different from task types. The 4 muscles(biceps brachii muscle, tricep brachii muscle. middle deltoid muscle. trapezius muscle) recruitment patterns of up-task were higher than those of other tasks. The MPF value decreased with the endurance time, and the shift of MPF at up-task was larger than that of the other task types.

PNF 신장 방법에 관한 고찰 (Review of PNF stretching method)

  • 이현옥;신재욱
    • PNF and Movement
    • /
    • 제7권4호
    • /
    • pp.1-7
    • /
    • 2009
  • Purpose : This paper reviews on the method of PNF stretching. Methods : This is literature study with Pubmed, medline, SPORT Discus, EBSCO, ProQuest and books. Results : PNF stretching is effective for increasing range of motion than static and ballistic stretching. CR(contract-relax) technique is effective and CRAC(contract-relax with agonist contraction) technique including agonist contraction is more effective. A minimum of one repetition, twice or three times per week is required for range of motion gains, needs to be conducted continueously. A minimum of 20% contraction intensity and more than 3 seconds contraction duration are needed to increase range of motion. Inclusion of static stretching of antagonist and agonist contraction is more effective. Conclusions : PNF stretching is more effective for increasing range of motion than other stretching methods, but, clinicians need to select proper techniques according to subjects and muscles, and conduct carefully when applying technique.

  • PDF

앉은 자세에서 가벼운 부하를 들고 수행하는 복부드로잉 운동이 요통대상자와 건강인의 배가로근 수축에 미치는 영향 (Effects of Abdominal Drawing-in Maneuver With Light Load at Sitting on Transverse Abdominis Contraction in Participants With and Without Low Back Pain)

  • 원종임
    • PNF and Movement
    • /
    • 제21권2호
    • /
    • pp.243-253
    • /
    • 2023
  • Purpose: This study aimed to investigate the effects of an abdominal drawing-in maneuver (ADIM) with a light load while sitting on transverse abdominis contraction in subjects with and without low back pain. Methods: In this study, 20 participants with chronic low back pain and 20 controls participated. Ultrasonography was used to assess the thickness of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles. Muscle thickness was measured at rest and during ADIM in three different sitting postures: (1) just sitting, (2) sitting loaded position (holding a 1 or 2 kg dumbbell in each hand), and (3) sitting loaded shoulder flexion position (holding a 1 or 2 kg dumbbell in each hand). Results: The contraction ratio (CR) and preferential activation ratio (PAR) of the TrA during ADIM had no significant interactional effect between the group and the sitting postures. However, the CR and PRA of the TrA during the ADIM showed significant differences among the three different sitting postures. The CR of the TrA during the ADIM in the sitting loaded shoulder flexion position was significantly increased compared to that in the sitting position (p<0.05). Moreover, the PRA of the TrA muscle during ADIM in sitting loaded and sitting loaded shoulder flexion positions was significantly higher than that in the sitting position (p<0.05). Conclusion: The findings suggest that ADIM in the sitting-loaded shoulder flexion position should be implemented to facilitate TrA activity.

Ni-Cr-Fe 및 Ni-Fe-Cr-Mo계 합금의 용접부 균열특성에 관한 연구 Part II : 열영향부의 액화균열 (A Study on the Cracking Behavior in the Welds of Ni-Cr-Fe and Ni-Fe-Cr-Mo Alloys)

  • 김희봉;이창희
    • Journal of Welding and Joining
    • /
    • 제15권5호
    • /
    • pp.46-55
    • /
    • 1997
  • This study has evaluated the liquation cracking behavior in the heat affected zone of several Ni base superalloys (Incoloy 825, Inconel 718 and Inconel 600). 304 and 310S austenitic stainless steels were also included for comparison. In addition, the mechanism of liquation cracking in the HAZ was postulated based on the extensive microstructural examinations with SEM, EDAX and TEM. The liquation cracking resistance of Ni base alloys was found to be far inferior to that of austenitic stainless steels. The liquation cracking of Incoloy 825 and Inconel 718 was believed to be closely related with the Laves-austenite(Ti rich in 825 and Nb rich in 718) and MC-austenitic eutectic phases formed along the grain boundaries by constitutional liquation and incipient melting under rapid welding thermal contraction. Further, liquation cracking resistance of the HAZ was dependent not only upon the type and amount of low melting phases but also on the grain size.

  • PDF

정신물리학적 접근방법을 이용한 들기작업의 작업하중 평가에 관한 연구 (A Psychophysical Approach on the Assessment of Lifting Loads)

  • 박현진;옥민우;장성록
    • 한국안전학회지
    • /
    • 제27권4호
    • /
    • pp.96-100
    • /
    • 2012
  • Low back pain (LBP) is a major issue in modern industrialized society which is mainly caused by manual material handling (MMH) tasks. The objective of this study was to provide scientific data for establishing work standard for Korean workers throughout the laboratory experiment including some specific lifting tasks. Thirty male college students were recruited as participants. The maximum voluntary contraction (MVC), recommended weight limit (RWL), and psychophysical safety weight using Borg's CR-10 scale were studied. Results showed that the RWL was 8.4% MVC higher than the proposed psychophysical safety weight. Based on this result, it is suggested that the NIOSH lifting equation (NLE) should not be directly applied to Korean without reasonable modifications. The ratio of psychophysical safety weight to MVC was ranged from 20.1 to 26.4%. It is expected that use of the methodology in this study may provide better expectation of the work ability of Korean for reducing lower back pains caused by MMH.

흰쥐에서 위장관에 작용하는 생약의 진경 및 항위궤양 효능 (Spasmolytic and Anti-peptic Ulcer Activities of Crude Drugs Acting on Gastrointestinal Tract in Rats)

  • 조승길;박혜란;김창종
    • 약학회지
    • /
    • 제40권5호
    • /
    • pp.591-598
    • /
    • 1996
  • The water extracts of ten crude drugs were tested for the spasmolytic and anti-peptic ulcer activities on rat ileum smooth muscle contraction and aspirin-induced acute hemorrhag ic erosive gastritis respectively. The water extract of Aurantii immaturi pericarpium(AIP)($IC_{50}=1.5{\times}1O^{-2}$g/l), Aurantii nobilis pericarpium(ANP)($IC_{50}=2.5{\times}1O^{-2}$g/l), Cyperi rhizoma(CR)($IC_{50}=3.3{\times}1O^{-2}$g/l). Linderae radix(LR) ($IC_{50}=6.8{\times}1O^{-2}$), Aurantii fructus immaturus(AFI)($IC_{50}=11.8{\times}1O^{-2}$), Saussureae radix(SR)($IC_{50}=13.2{\times}1O^{-2}$g/l) and Ponciri fructus(PF)($IC_{50}=23.3{\times}1O^{-2}$g/l) showed inhibitory activity on the isometric contraction of rat ileum smooth muscle induced by electrical stimulation in a concentration-dependent manner, whereas the water extracts of Arecae pericarpium(AP), Agastachis herba(AH) and Magnoliae cortex(MC) potentiated the isometric contraction. In the aspirin-induced acute gastritis, the water extracts of MC, AP and CR reduced significantly the gastric juice secretion, gastric juice acidity and pepsin activity. They also showed protective activity of gastric mucosal layer from erosion and petichial hemorrhage in gross and histological examination.

  • PDF

화염경화 표면처리 공정에 의한 12Cr 강의 잔류응력 거동 (Behavior of the Residual Stress on the Surfaces of 12Cr Steels Generated by Flame Hardening Process)

  • 이민구;김광호;김경호;김흥회
    • 한국표면공학회지
    • /
    • 제37권4호
    • /
    • pp.226-233
    • /
    • 2004
  • The residual stresses on the surfaces of low carbon 12Cr steels used as a nuclear steam turbine blade material have been studied by controlling the flame hardening surface treatments. The temperature cycles on the surfaces of 12Cr steel were controlled precisely as a function of both the surface temperature and cooling rate. The final residual stress state generated by flame hardening was dominated by two opposite competitive contributions; one is tensile stress due to phase transformation and the other is compressive stress due to thermal contraction on cooling. The optimum processing temperatures required for the desirable residual stress and hardness were in the range of $850^{\circ}C$ to $960^{\circ}C$ on the basis of the specification of GE power engineering. It was also observed that the high residual tensile stress generated by flame hardening induced the cracks on the surfaces, especially across the prior austenite grain boundaries, and the material failure virtually, which might limit practical use of the surface engineered parts by flame hardening.

한쪽 다리에 적용한 수축-이완 기법이 반대쪽 무릎관절 폄 범위에 미치는 효과 -예비연구- (The Immediate Effects of Unilateral Contract-Relax Stretching on Contralateral Knee Extension Range -A Preliminary Study-)

  • 신승섭
    • PNF and Movement
    • /
    • 제17권2호
    • /
    • pp.263-274
    • /
    • 2019
  • Purpose: This article was conducted to determine the immediate effects of unilateral contract-relax (CR) stretching on contralateral knee extension range and to compare both sides of the knee extension range between experimental and control groups. Methods: This study recruited 16 adult males and females with straight leg raising abilities below $90^{\circ}$. The subjects were randomly divided into an experimental group and a control group comprising 8 subjects each. The experimental group performed direct CR stretching on the right hamstring muscles with straight hip extension adduction, and the control group performed indirect CR stretching on the right hamstring muscles with straight hip flexion abduction. Each group performed CR stretching 4 times with 4 repetitions comprising 10 sec of contraction and a 10 sec break between repetitions. Before and after the CR stretching exercises, the subjects' passive knee extensions were measured at the hip in a $90^{\circ}$ flexed position. The subjects' peak force on the right leg and peak pressure on the left leg during each CR stretching exercise were also measured. Results: After doing CR stretching 4 times, each group showed a significantly increased passive knee extension range on both sides, and there was no difference in the passive knee extension ranges between the groups. The peak force on the right leg was significantly higher in the experimental group than the control group. There was no difference in peak pressure between the groups. Conclusion: After applying unilateral CR stretching, the study subjects experienced a significantly increased passive knee extension range on the contralateral side. For patients who find it difficult to apply stretching techniques to knee joints directly, the use of the proprioceptive neuromuscular facilitation technique of CR stretching may be useful in improving the range of the knee joint on the contralateral side without direct treatment.