• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.772-784
• /
• 2011

We measured grain size, organic matter, and metallic elements (Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) in intertidal sediments collected from six islands in the western part of Jellanam Province in order to evaluate heavy metal contamination in the tidal flat sediments of coastal islands. The evaluation of metal contamination was carried out using geochemical assessment techniques such as sediment quality guidelines (SQGs), enrichment factor (EF), and geoaccumulation index ($I_{geo}$). Surface sediments were classified into four sedimentary facies: sand, gravelly muddy sand, slightly gravelly mud, and silt. The concentrations of heavy metals in intertidal sediments from Jaeun, Amtae, Biguem, and Docho islands showed good positive correlations with mean grain size and ignition loss, indicating that the concentrations of metallic elements in these sediments were dependent on grain size and the organic matter content. The concentrations of heavy metals in sediments from almost all of the stations were lower than two criterion values proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Based on the EF and $I_{geo}$ results, surface sediments were a little polluted for Cr and were moderately polluted for As. Our results suggest that more intensive studies are necessary in the future in order to determine the major source of As in intertidal sediment and to evaluate the As pollution level in macrobenthos.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.514-523
• /
• 2004

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-embedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 80 frames of the test input stereo image, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.82, 1.11, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.113-121
• /
• 2005

Face detection in real-time video constitutes one of the major trend in face recognition. In this paper, we propose a face detection algorithm using the skin color and Haar-like feature in real-time video. The proposed algorithm is followed by three sequences; First, moving objects are detected by difference-method in YCbCr coordinates, and then by using Haar-like features, face candidate regions of the moving objects is selected. Finally we extract the most possible face candidates by comparing the pixel values of face candidates with the skin color. In order to prevent a mistake. we use similar features or skin color to detect a face by selecting a adaptive ROI and improve the processing speed in real-time video. The computer simulation shows the validity of the proposed method that the processing speed is improved by 30% than previous works and the detection success rate is 96.8%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.69-78
• /
• 2002

This paper addresses a method to automatically detect out a person's face from a given image that consists of a hair and face view of the person and a complex background scene. Out method involves an effective detection algorithm that exploits the spatial distribution characteristics of human skin color via an adaptive fuzzy color classifier (AFCC), The universal skin-color map is derived on the chrominance component of human skin color in Cb, Cr and their corresponding luminance. The desired fuzzy system is applied to decide the skin color regions and those that are not. We use RGB model for extracting the hair color regions because the hair regions often show low brightness and chromaticity estimation of low brightness color is not stable. After some preprocessing, we apply convex-hull to each region. Consequent face detection is made from the relationship between a face's convex-hull and a head's convex-hull. The algorithm using the convex-hull shows better performance than the algorithm using pattern method. The performance of the proposed algorithm is shown by experiment. Experimental results show that the proposed algorithm successfully and efficiently detects the faces without constrained input conditions in color images.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.467-475
• /
• 2015

In this paper, the behaviour of a cantilevered beam was predicted to examine the difference between linear and non-linear static, dynamic analysis for a structure by using CR nonlinear formulation. Then, external transverse static and dynamic loads were applied at the free tip of the beam. Classical theories were used for the present linear analysis and co-rotational dynamic FEM program was used for the present nonlinear analysis. In the static analysis, effects of the load for the beam deflection were observed in both linear and nonlinear analysis. Then, normalized displacement at the tip of the beam was predicted for different frequency ratio and a significant difference was obtained in the vicinity of the resonant frequency. In addition, effects of frequency and time for the beam deflection were investigated to find the frequency delay.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.226-231
• /
• 2003

We analyzed the concentrations of heavy metals associated airbone particles by using AAS made by both a domestic manufacturer and one of the foreign manufacturer. One model developed by a domestic manufacture showed excellent results in the selected wavelength with an excellent performance of a monochromator. It abandons a big drop except a fine drop to improve reproduction in atomizer, so that no remains should leave. Using the low pass filter we were able to reduce a noise of detection signal. The performance of our equipment was found to be highly compatible with that of a foreign company as we achieved the detection limit of about $0.015{\mu}g/L$ using a standard solution of Au. The PM samples had been collected from by main observation points in 7 areas of Seoul city from 2001 to the spring in 2002. with these PM sample we analyzed the concentrations of Pb, Cu, Mn, Cd, Ni, Fe, Cr, Co, Mg and Al.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2389-2396
• /
• 2014

Spectrum handoff is the process of exchanging progressing data transmission from the current channel to another idle channel. The essential goal of spectrum handoff in CR(Cognitive Radio) networks is to perform consistent data transmission while sustaining performance of ongoing transmission of secondary users. This handoff procedure can cause additional latency that eventually affects on the performance of CR transmission. Channel prediction method is expected to avoid the disruption to primary users and to reduce the handoff latency. In this paper, adaptive channel prediction is proposed to cope with time-varying channel and an adaptive channel prediction based proactive handoff procedure is designed to enhance data transmission performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4472-4477
• /
• 2013

This paper describes the color features of smoke in each standard color model in order to present the most suitable color model for somke detection in video surveillance system. Histogram intersection technique is used to analyze the difference characteristics between color of smoke and color of non smoke. The considered standard color models are RGB, YCbCr, CIE-Lab, HSV, and if the calculated histogram intersection value is large for the considered color model, then the smoke spilt characteristics are not good in that color model. If the calculated histogram intersection value is small, then the smoke spilt characteristics are good in that color model. The analyzed result shows that the RGB and HSV color models are the most suitable for color model based smoke detection by performing respectively 0.14 and 0.156 for histogram intersection value.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.426-426
• /
• 2015

무경운 농법은 경작지의 토양을 교란시키지 않고 작물을 재배하는 방법으로, 토양의 물리성 개선과 토양 침식 예방, 생산비 절감 등의 효과가 있어 전 세계적인 인정을 받고 있는 농업기술이다. 그러나 아직까지 무경운의 재배 지속 기간 등 많은 의문이 제기되고 있으며, 국내 환경조건에 맞는 실험적인 연구가 미흡한 실정이다. 이에 본 연구에서는 최적관리기법의 하나인 무경운(No-till)을 적용한 밭의 오염물질 저감효과를 장기적으로 살펴보고자 2011년부터 2014년까지 4년간의 모니터링을 실시하였다. 무경운 농법을 적용하기 위하여 동계피복작물(밀, 보리)을 재배작물 정식하기 전해 겨울에 파종하여 이듬해 6월 말 수확하였다. 이후 7월에서 8월 사이 재배작물(들깨, 무)을 정식하였다. 시비는 2011년에는 축산퇴비, 2012년에는 축산액비 그리고 2013년과 2014년에는 화학비료를 시비하였으며, 매년 경운과 무경운의 시비량은 동일하게 처리하였다. 유출 시험포의 면적은 $150m^2$(폭 5 m, 경사장 30 m)이며, 8개(경사도 3% 4개, 경사도 8% 4개)의 시험포를 조성하여 각각 2개씩 경운(관행)과 무경운을 적용하였다. 모니터링은 재배작물(들깨, 무) 정식 이후부터 작물 수확 전까지 강우사상에 대하여 이루어졌으며, 연구기간동안 총 13회의 강우 사상에 대하여 조사를 실시하였다. 경운대비 무경운 시험포의 평균 오염부하 삭감율을 분석한 결과 경사도 3% 시험포의 경우 BOD는 35.1%, $COD_{Cr}$은 37.4% 그리고 영양염류인 TN과 TP는 각각 36.9%와 33.5%가 삭감된 것으로 조사되었으며, 경사도 8% 시험포의 경우 BOD가 36.4%, $COD_{Cr}$은 45.8%, TN과 TP는 각각 45.5%와 40.6%가 삭감된 것으로 나타났다. 우리나라에서는 경운(관행) 농법이 영농관리 차원에서 대부분 이용되고 있으나, 본 연구 결과에 기초할 때 무경운 농법으로 영농할 경우 강우유출수 및 하천으로 유입되는 비점오염부하를 효과적으로 제어할 수 있을 것으로 기대된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.480-485
• /
• 2004

In this paper, a new predistortion linearizing method using frequency up-conversion operation of mixer is proposed. This linearizing method doesn't require any additional signal sources in spite of frequency up-conversion mixing operation. This method extracts the 2nd low frequency intermodulation distortion signal from input signals and uses the extracted 2nd low frequency intermodulation distortion signal as mixing signal source. To show validation of the proposed predistortion method, we made K-PCS power amplifier. On 2-tone signals amplification process, the (C/I) ratio of amplifier is improved 26 ㏈ (@Po=22 ㏈m/tone), where two tones are 1.8544 ㎓ and 1.8556 ㎓, respectively. And (C/I) ratio is improved more than to 20 ㏈ for 17 ㏈ output signal dynamic range. On IS-95A CDMA 1FA amplification process, the improvements of adjacent channel power ratio(ACPR) are 10.8 ㏈ and 6.4 ㏈ at ${\pm}$885 ㎑ and ${\pm}$1.25 ㎒ offset points, respectively.