• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.63-70
• /
• 2012

This paper discussed on the directive gain improvement method of the U-type ultra wide-band(UWB) planar patch antenna model with CPW feeding. For directive gain improvement, the U-type printed patch antenna model with CPW feeding is reconstructed as a microstrip structure by adding a reflection plane with aperture slot. The reflection coefficient of the reconstructed antenna is less than -6.5 dB(VSWR < 3.3) to the characteristic impedance of $50.08{\Omega}$ and showed the directive radiation patterns with the directive gain of 7.5 dBi ~ 10.1 dBi, the front-back ratio of 17.8 dB ~ 28.7 dB and the range of -3dB radiation angle over ${\pm}30^{\circ}$ to the main beam direction of ${\theta}=0^{\circ}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.765-771
• /
• 2015

In this paper, a dual-band arc-shaped monopole antenna for WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on CPW-fed structure, and composed of two-arc shaped of radiating patch and ground plane. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator (HFSS) and found the parameters that greatly effect antenna characteristics. Using optimal parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the propnosed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN bands. And measured results of gain and radiation patterns characteristics displayed determined for opeating bands.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.38-44
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2012

In this paper, Coplanar waveguide(CPW)-fed slot loop antenna, which is applicable to the dual band(2.4GHz~2.4835GHz, 5.15GHz~5.825GHz) for the wireless LAN, is proposed. In order to miniaturize the proposed antenna, slot loop is bent by meandering. The resonant frequencies in the required dual band are adjusted by variation of the resonant length of slot loop as well as slot width. In particular, use of capacitive coupling CPW feed provides impedance matching without a seperate matching circuit, because the amount of electromagnetic coupling can be controlled by the offset between feed and radiator. As a result, it has been observed that the proposed antenna satisfies not only the required return loss(${\leq}10dB$) but also has high efficiency(${\geq}80%$) over the whole frequency band. In order to check the validity of the proposed antenna, some simulated results for return loss and radiation pattern are presented in comparison with the measured results.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.188-191
• /
• 2003

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.710-710
• /
• 2006

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.218-223
• /
• 2010

In this paper, a novel CPW(Coplanar Waveguide)-fed UWB(Ultra Wide Band) antenna is designed, implemented, and measured for UWB communications. CPW-fed planar antenna has advantages of wide-bandwidth, low-cost and easy interaction with radio frequency front end circuitry. We have used HFSS(High Frequency Structure Simulator) of Ansoft which is based on the FEM(Finite Element Method) to simulate the proposed antenna. FR-4 substrate of thickness 1.6 mm and relative permitivity 4.4 is used for implementation. The proposed antenna showed VSWR(Voltage Standarding Wave Ratio)${\leq}2$ for the frequency band from 3.1 GHz to 10.6 GHz which is used for ultra wide band communication. Measured peak gains are 2.61, 4.95, 2.89, 7.35 dBi at 3, 6, 8, 11 GHz, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.291-298
• /
• 2018

In this paper, we propose an antenna that improves narrow band characteristics which is a disadvantage of inverted-F type antenna and utilizes the structural advantages of small size and low profile by modifying the inverted-F type antenna structure and applying CPW feeding method. Experimental results show that the broadband characteristic of about 40% at the center frequency of 3 GHz is seen, and it is found that the narrow band characteristic which is a disadvantage of the conventional inverted F antenna can be improved. The radiation pattern showed almost omnidirectional characteristics and the maximum gain was about 2.0dBi.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.278-282
• /
• 2002

In this paper, a dual-band CPW antenna is designed with the aid of Genetic Algorithm and Finite-Difference Time-Domain method. The design goal is to minimize the magnitude of S$\sub$11/ in the frequency band between 1.8㎓ and 2.4㎓. The resonance frequencies are shifted by about 80MHz and 50MHz from the desired frequencies at 1.8㎓ and 2.4㎓ respectively. But the bandwidth agrees well with that of Simulation.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.215-218
• /
• 2002

In this paper, a dual-frequency printed slot antenna loaded with an open-ring conducting strip and capacitively fed by a coplanar waveguide(CPW) is designed. The designed antenna has a bandwidth of 240㎒(1690㎒-1930㎒) at PCS frequency band and of 160㎒(2380㎒-2540㎒) at WLAN frequency band. In both frequency ranges, pattern and gain requirements are satisfied. The commercial software, IE3D, was used to design slot antenna. The predicted characteristics along with measured data are presented for verification purpose.