• Journal of Biomedical Engineering Research
• /
• v.41 no.3
• /
• pp.128-137
• /
• 2020

Cardiac electrophysiology studies often use simulation to predict how cardiac will behave under various conditions. To observe the cardiac tissue movement, it needs to use the high--resolution heart mesh with a sophisticated and large number of nodes. The higher resolution mesh is, the more computation time is needed. To improve computation speed and performance, parallel processing using multi-core processes and network computing resources is performed. In this study, we compared the computational speeds of CPU parallelization and GPU parallelization in virtual heart simulation for efficiently calculating a series of ordinary differential equations (ODE) and partial differential equations (PDE) and determined the optimal CPU and GPU parallelization architecture. We used 2D tissue model and 3D ventricular model to compared the computation performance. Then, we measured the time required to the calculation of ODEs and PDEs, respectively. In conclusion, for the most efficient computation, using GPU parallelization rather than CPU parallelization can improve performance by 4.3 times and 2.3 times in calculations of ODEs and PDE, respectively. In CPU parallelization, it is best to use the number of processors just before the communication cost between each processor is incurred.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.3
• /
• pp.495-504
• /
• 2012

This paper presents various speed optimization techniques for software implementation of the HIGHT block cipher on CPUs and GPUs. We considered 32-bit and 64-bit operating systems for CPU implementations. After we applied the bit-slicing and byte-slicing techniques to HIGHT, the encryption speed recorded 1.48Gbps over the intel core i7 920 CPU with a 64-bit operating system, which is up to 2.4 times faster than the previous implementation. We also implemented HIGHT on an NVIDIA GPU equipped with CUDA, and applied various optimization techniques, such as storing most frequently used data like subkeys and the F lookup table in the shared memory; and using coalesced access when reading data from the global memory. To our knowledge, this is the first result that implements and optimizes HIGHT on a GPU. We verified that the byte-slicing technique guarantees a speed-up of more than 20%, resulting a speed which is 31 times faster than that on a CPU.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.323-323
• /
• 2020

그래픽 처리 장치(Graphic Processing Unit: GPU)는 그래픽 처리 작업에 특화된 다수의 산술논리 장치(Arithmetic Logic Unit: ALU)로 구성되어 있어서 중앙 처리 장치(Central Processing Unit: CPU)보다 한 번에 더 많은 연산 수행이 가능하다. 본 연구는 GPU 가속 운동파모형을 실제 유역에 적용하여, GPU 가속 운동파 강우유출모형 결과에 대한 정확성과 연산 소요 시간에 대한 효율성을 확인하였다. GPU 가속 운동파모형은 분포형 강우유출모형의 수치모의 연산시간을 단축시키기 위해 CUDA 포트란을 이용하여 개발되었다. 분포형모형의 지배방정식은 운동파모형과 Green-Ampt모형으로 구성되었고, 운동파모형은 유한체적법을 이용하여 이산화 하였다. GPU 가속 운동파모형을 이용하여 금강의 미호천 유역에서 발생하는 강우유출현상을 모의 하였고, 동일한 유한체적법을 이용한 CPU(Central Processing Unit) 기반의 강우유출모형과 비교하였다. 그 결과 GPU 가속모형의 결과는 미호천 유역 하류단에서 관측한 결과와 유사한 결과를 나타냈다. 또한, 연산소요시간은 CPU 기반의 강우유출모형의 연산소요시간보다 단축되었으며, 본 연구에 사용된 장비를 기준으로 최대 100배 정도 단축되었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.32-35
• /
• 2017

직접 통로(Direct Pass-through) 기반 GPU(Graphic Processing Unit) 가상화 기법은 클라우드 환경에서 가상머신에게 GPU 장치의 기능을 지원하기 위한 일반적인 방법 중 하나이다. GPU 장치는 GPGPU 기술을 통해 연산을 가속화 할 수 있기 때문에 클라우드 환경에서도 가상머신에 고성능 연산을 지원하기 위해 많이 사용되고 있다. 하지만 기존 가상머신 스케줄링 기법은 가상머신의 CPU 사용 시간을 기반으로 스케줄링 되며, GPU 자원 사용을 고려하지 않는다. 본 논문에서는 GPU와 CPU 연산을 수행하는 가상머신들이 동시에 실행되는 환경에서 성능 실험을 통해 가상머신의 GPU 연산이 다른 가상머신에게 미치는 성능 영향과 GPU 작업 길이가 다른 가상머신에게 미치는 영향을 분석한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.427-434
• /
• 2019

In the present study, we assessed the parallel computing performance of Agisoft Metashape for orthomosaic generation, which can implement aerial triangulation, generate a three-dimensional point cloud, and make an orthomosaic based on SfM (Structure from Motion) technology. Due to the nature of SfM, most of the time is spent on Align photos, which runs as a relative orientation, and Build dense cloud, which generates a three-dimensional point cloud. Metashape can parallelize the two processes by using multi-cores of CPU (Central Processing Unit) and GPU (Graphics Processing Unit). An orthomosaic was created from large UAV (Unmanned Aerial Vehicle) images by six conditions combined by three parallel methods (CPU only, GPU only, and CPU + GPU) and two operating systems (Windows and Linux). To assess the consistency of the results of the conditions, RMSE (Root Mean Square Error) of aerial triangulation was measured using ground control points which were automatically detected on the images without human intervention. The results of orthomosaic generation from 521 UAV images of 42.2 million pixels showed that the combination of CPU and GPU showed the best performance using the present system, and Linux showed better performance than Windows in all conditions. However, the RMSE values of aerial triangulation revealed a slight difference within an error range among the combinations. Therefore, Metashape seems to leave things to be desired so that the consistency is obtained regardless of parallel methods and operating systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.488-495
• /
• 2009

This paper presents a fast feature extraction method for autonomous mobile robots utilizing parallel processing and based on OpenMP, SSE (Streaming SIMD Extension) and CUDA programming. In the first step on CPU version, the algorithms and codes are optimized and then implemented by parallel processing. The parallel algorithms are debugged to maintain the same level of performance and the process for extracting key points and obtaining dominant orientation with respect to key points is parallelized. After extraction, a parallel descriptor via SSE instructions is constructed. And the GPU version also implemented by parallel processing using CUDA based on the SIFT. The GPU-Parallel descriptor achieves an acceleration up to five times compared with the CPU-Parallel descriptor, but it shows the lower performance than CPU version. CPU version also speed-up the four and half times compared with the original SIFT while maintaining robust performance.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.9
• /
• pp.189-196
• /
• 2020

Recently, GPU cloud computing technology applying GPU(Graphics Processing Unit) devices to virtual machines is widely used in the cloud environment. In a cloud environment, GPU devices assigned to virtual machines can perform operations faster than CPUs through massively parallel processing, which can provide many benefits when operating high-performance computing services in a variety of fields in a cloud environment. In a cloud environment, a GPU device can help improve the performance of a virtual machine, but the virtual machine scheduler, which is based on the CPU usage time of a virtual machine, does not take into account GPU device usage time, affecting the performance of other virtual machines. In this paper, we test and analyze the performance degradation of other virtual machines due to the virtual machine that performs GPGPU(General-Purpose computing on Graphics Processing Units) task in the direct path based GPU virtualization environment, which is often used when assigning GPUs to virtual machines in cloud environments. Then to solve this problem, we propose a GPGPU task management method for a virtual machine.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.264-271
• /
• 2011

In this paper we examine and compare the computational speeds of three-dimensional (3D) object recognition by use of digital holography based on central unit processing (CPU) and graphic processing unit (GPU) computing. The holographic fringe pattern of a 3D object is obtained using an in-line interferometry setup. The Fourier matched filters are applied to the complex image reconstructed from the holographic fringe pattern using a GPU chip for real-time 3D object recognition. It is shown that the computational speed of the 3D object recognition using GPU computing is significantly faster than that of the CPU computing. To the best of our knowledge, this is the first report on comparisons of the calculation time of the 3D object recognition based on the digital holography with CPU vs GPU computing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.683-686
• /
• 2011

1970년대 라디오 주파수를 사용하여 컴퓨터 통신 네트워크가 구축된 이후 눈부신 발전을 거듭하여 Personal Computer 뿐만 아니라 Mobile이나 Tablet PC등에서도 인터넷이 가능하다. 이렇게 다양한 매체를 통해 인터넷을 사용함에 따라 보안에 대한 중요성이 높아지고 있다. 하지만 최근 현대 캐피탈이나 농협, 네이트와 같은 해킹 사례를 보면 평문 데이터 사용에 의해 피해가 더욱 확대 되었다. 평문 데이터 사용함에 따라 보안 위협이 커지는데 평문 데이터를 사용하는 이유를 암호화를 사용했을 때보다 QoS 하락 때문이라고 볼 수있다. 이를 해결하기 위해 고정된 인프라에서 잉여 자원인 GPU를 사용하여 암호화를 할 때 QoS 하락을 줄일 수 있을 것이다. 또한 CPU보다는 멀티코어를 사용한 병렬 처리를 활용하여 CPU보다 상대적으로 효율적인 암호화가 가능하다고 생각한다. 본 논문에서는 CPU를 이용한 암호화 처리 속도와 GPU를 이용한 암호화 처리 속도를 비교하여 GPU를 이용한 암호화 처리 가능성을 검토하였다.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.2
• /
• pp.1-10
• /
• 2017

A variety of filters are applied to improve the quality of noise and low resolution medical images. This is necessary to reduce the radiation dose of the patient and to improve the utilization of the conventional spherical imaging equipment. In the conventional method, it is common to perform filtering using the CPU of the PC. However, it is difficult to produce results in real time by applying various calculations and filters to high-resolution human images using only the CPU performance of a PC used in a hospital. In this paper, we analyze the structure and performance of Intel integrated GPU in CPU and propose a method to perform image filtering using OpenCL parallel processing function. By applying complex filters with high computational complexity to medical images, high quality images can be generated in real time.