• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1011-1012
• /
• 2006

In this paper, implementation process of standard platform for T-DMB Receiver in low-cost and small-size are following: First, implement SoC for 32 bit RISC CPU and 16 bit DSP, Hardware H.264 CODEC, Post Processor or Video Display, Audio Processor, I/O Device. Second, implement Real Time OS for flexible application. Third, propose simple architecture for interface with peripheral devices using one-chip processor.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.122-127
• /
• 2005

This paper proposes a prototype IED hardware design and it's real-time experimental results. To evaluate performance of the IED, the study is well constructed power system model including power transformer utilizing the EMTP software and the testing is made through simulation of various cases. The relaying that is well constructed using DSP chip and RISC CPU etc. has been developed and the prototype IED has been verified through on-line testing by LabVIEW simulator. The results show that an advanced relaying based prototype IED never mis-operated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.26-36
• /
• 1999

In this paper, the novel scheme of OAM performance management function is proposed to supply the most of network resources and reliable services by processing data having various QoS(quality of service) in the view of cell loss and cell delay of ATM networks Also, the special fields of OAM cell are defined in order to improve correlate control, operation, and management technique between networks which is required to flexibility and precision control as detecting the performance information of the variable networks periodically. The proposed OAM function, the input/output function of cell, and the interface function of the accessory device which is likely to the memory/CPU are designed to ASIC. The designed chip is carried out the back-end simulation using Verilog-XL simulator of Cadence. In result, it is able to performs an accurate control in $2{\mu}s$.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.184-193
• /
• 1998

In this paper, a real-time acoustic echo canceller is implemented using only PC's CPU without extra help from a DSP chip. The adaptive digital filter is designed efficiently so that it can be implemented in real-time and has a proper cancellation performance. It is proposed that a new double talk detector consumes a small computational complexity and guarantees the fast detection and robust operation. The real-time acoustic echo canceller consists of the full-duplex sound card and 166 MHz Pentium PC, and requires less than 10% CPU time.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.435-442
• /
• 2018

This study implemented an FPGA-based system to extract PCB defect patterns. The FPGA-based system can perform pattern matching at high speed for vision automation. An image processing library that is used to extract defect patterns was also implemented in IPs to optimize the system. The IPs implemented are Camera Link IP, Histogram IP, VGA IP, Horizontal Projection IP and Vertical Projection IP. In terms of hardware, the FPGA chip from the Vertex-5 of Xilinx was used to receive and handle images that are sent from a digital camera. This system uses MicroBlaze CPU. The image results are sent to PC and displayed on a 7inch TFT-LCD and monitor.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.625-634
• /
• 2002

Cryptography is the methods of making and using secret writing that is necessary to keep messages private between two parties. Cryptography is compute-intensive algorithm and needs cpu resource excessively. To solve these problems, there exists hardware approach that implements cryptographic algorithm with hardware chip. In this paper, we presents the design and implementation of cryptographic hardware and compares its performance with software cryptographic algorithms. The experimental result shows that the hardware approach causes high I/O overheads when it transmits data between cryptographic board and host cpu. Hence, low complexity cryptographic algorithms such as DES does not improve the performance. But high complexity cryptographic algorithms such as Triple DES improve the performance with a high rate, roughly from two times to Sour times.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.92-95
• /
• 2017

In this paper, we proposed a way to improve function of small scale GP-GPU. Instead of using superscalar which increase scheduling-complexity, we suggested the application of simple core to maximize GP-GPU performance. Our studies also demonstrated that simplified Stream Processor is one of the way to achieve functional improvement in GP-GPU. In addition, we found that developing of optimal thread-assigning method in Warp Scheduler for specific application improves functional performance of GP-GPU. For examination of GP-GPU functional performance, we suggested the thread-assigning way which coordinated with Deep-Learning system; a part of Neural Network. As a result, we found that functional index in algorithm of Neural Network was increased to 90%, 98% compared with Intel CPU and ARM cortex-A15 4 core respectively.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.563-566
• /
• 2003

We have designed the power control unit which belongs to the power cabinet and controls the power supplied to Control Rod Drive Mechanism(CRDM) as a digital system based on Digital Signal Processor(DSP). The power control unit dualized as the form of Master/Slave has had its increased reality. The Central Process Unit(CPU) board of a power control unit possesses two Digital Signal Processors(DSPs) of the control DSP for performing the tasks of power control and system monitoring and the communication of the Control DSP and the Communication DSP. To accomplish the functions requested in the power control unit effectively, we have installed Field Programmable Gate Arrays(FPGAS) on the CPU board and have FPGAs perform the memory mapping, the generation of each chip selection signal, the giving and receiving of the signals between the power controllers dualized, the fault detection and the generation of the firing signals.