• Korean Circulation Journal
• /
• v.52 no.12
• /
• pp.890-900
• /
• 2022

Background and Objectives: Some individuals exhibit discrepancies between risk classifications assessed using clinical factors and those obtained by vascular imaging. We aimed to evaluate whether statins provide clinical outcome benefits in patients classified as having low to moderate cardiovascular risk but with carotid plaque. Methods: This was a retrospective propensity score matching study. A total of 12,158 consecutive patients undergoing carotid ultrasound between January 2012 to February 2020 were screened. Individuals with low to moderate cardiovascular risk who were not currently recommended for statin therapy but had carotid plaques were included. Among 1,611 enrolled individuals, 806 (statin group: 403, control group: 403) were analyzed. The primary outcomes were major adverse cardiovascular and cerebrovascular events (MACCEs: cardiovascular death, myocardial infarction, coronary revascularization, and ischemic stroke or transient ischemic attack) and all-cause mortality. Results: During the median follow-up of 6.0 years, the incidence of MACCEs did not differ between the groups (6.1 and 5.7/1,000 person-years in the control and statin groups, respectively; adjusted hazard ratio [HR], 0.95; p=0.90). The incidence of all-cause mortality did not differ (3.9 and 3.9/1,000 person-years, respectively; adjusted HR, 1.02; p=0.97). Kaplan-Meier curves revealed similar rates of MACCEs (log-rank p=0.72) and all-cause mortality (log-rank p=0.99) in the 2 groups. Age and smoking were independent predictors of MACCEs. Subgroups exhibited no differences in clinical outcomes with statin use. Conclusions: Benefit of statin therapy was likely to be limited in low to moderate risk patients with carotid plaques. These results could guide physicians in clinical decision-making regarding cardiovascular prevention.

• Journal of Animal Science and Technology
• /
• v.58 no.10
• /
• pp.37.1-37.10
• /
• 2016

Background: Providing of insufficient nutrients limits the potential growth of pig, while feeding of excessive nutrients increases the economic loss and causes environment pollution. For these reasons, phase feeding had been introduced in swine farm for improving animal production. This experiment was conducted to evaluate the effects of dietary energy levels and phase feeding by protein levels on growth performance, blood profiles and carcass characteristics in growing-finishing pigs. Methods: A total of 128 growing pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc), averaging $26.62{\pm}3.07kg$ body weight, were assigned in a $2{\times}4$ factorial arrangement with 4 pigs per pen. The first factor was two dietary energy level (3,265 kcal of ME/kg or 3,365 kcal of ME/kg), and the second factor was four different levels of dietary protein by phase feeding (1growing(G)-2finishing(F) phases, 2G-2F phases, 2G-3F phases and 2G-3F phases with low CP requirement). Results: In feeding trial, there was no significant difference in growth performance. The BUN concentration was decreased as dietary protein level decreased in 6 week and blood creatinine was increased in 13 week when pigs were fed diets with different dietary energy level. The digestibility of crude fat was improved as dietary energy levels increased and excretion of urinary nitrogen was reduced when low protein diet was provided. Chemical compositions of longissimus muscle were not affected by dietary treatments. In backfat thickness ($P_2$) at 13 week, pigs fed high energy diet had thicker backfat thickness (P = 0.06) and pigs fed low protein diet showed the trend of backfat thinness reduction (P = 0.09). In addition, water holding capacity was decreased (P = 0.01) and cooking loss was increased (P = 0.07) as dietary protein level reduced. When pigs were fed high energy diet with low subdivision of phase feeding, days to 120 kg market weight was reached earlier compared to other treatments. Conclusion: Feeding the low energy diet and subdivision of growing-finishing phase by dietary protein levels had no significant effect on growth performance and carcass characteristics. Also, phase feeding with low energy and low protein diet had no negative effects on growth performance, carcass characteristics but economical profits was improved.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2000

The polymethylene-bridged dinuclear half-titanocenes [(CH$_2$)$_{n}$(C$_{5}$ H$_4$)$_2$][TiCl$_3$]$_2$ (n=5(10), 7(11), 9(12)) have been synthesized by treating the distannylated derivatives of the ligands with two equivalents of TiCl$_4$ in toluene. All complexes are characterized by IR, $^1$H NMR, $^{13}$ C NMR and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has been conducted in the presence of MMAO. From the polymerization experiments it was found that ( i ) all the prepared complexes 10-12 produced syndiotactic polystyrenes, ( ii ) the complex 12 holding the longest bridging ligand exhibited the highest activity but produced a polymer having the smallest molecular weight among the polymethylene-bridged dinuclear half-titanocenes. This behavior was attributed to the influence of electron-donating caused by the polymethylene bridge between two active centers as well as the effect of steric congestion around metal center caused by the proximal distance between two active sites.s.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.157-171
• /
• 2001

This study investigated the effects of Pb/Tl ratio, Pb concentration and concomitant matrix elements on the measurement of Pb isotope ratios using multi-collector ICP/MS (AXIOM MC model). Accuracy and reproducibility of Pb isotope ratios in NBS 981 solution were estimated for 42 data measured from March to August 2001. Pb isotopes measured in rocks, bronzes and sediments were compared to data measured by TIMS. Reproducibilities for $^{206}Pb/^{204}Pb,\; ^{207}Pb/^{204}Pb,\;and\;^{208}Pb/^{204}Pb$ ratio were about 500 ppm (2sd) and for $^{207}Pb/^{206}Pb$\;and\;^{208}Pb/^{206}Pb$ were 100~200 ppm for 200 ng of Pb in NBS 981 solution. The optimum conditions for the analysis of Pb isotope ratios with AXIOM MC for best accuracy and reproducibility were defined as follows; 1) Pb/Tl ratio is about 10 2) Pb concentration is about 100 ng/ml 3) correction for mass discrimination is performed by exponential law using 2.3887 of $^{205}Tl/^{203}Tl$ and Pb mass fractionation factor empirically obtained from $ln(^{208}Pb/^{206}Pb)-ln(^{205}Tl/^{203}Tl)$ relationship. The sample data measured with MC/ICP/MS for acid-digested and chemically separated rock samples, and acid-digested bronze samples and sediment samples coincide with those of TIMS within analytical errors. Therefore, MC/ICP/MS is a rapid analytical technique for Pb isotope ratios with the similar precision compared with TIMS.

• Journal of agricultural medicine and community health
• /
• v.38 no.2
• /
• pp.97-107
• /
• 2013

Objective: This study aimed to evaluate attention, memory and executive function in patients with narcolepsy. Methods: This study included 23 narcoleptic patients whose diagnosis were confirmed by the International Classification of Sleep Disorders(ICSD) at Chonnam National University Hospital Sleep Disorders Clinic or an other hospital in Korea, from 2005 to 2008, as well as 23 normal controls. All participants were given an IQ test for Korean-Wechsler Adult Intelligence Scale and several neuropsychological function tests (the d2 test for attention function, the Rey Complex Figure Test for nonverbal memory, the Korean-California Verbal Learning Test [K-CVLT] for verbal memory, and the Wisconsin Card Sorting Test for executive function). Clinical features of narcoleptic patients, including the frequency of excessive daytime sleepiness, cataplexy, sleep paralysis and hypnagogic hallucination, were investigated by a structured clinical interview administered by a neuropsychiatist. Excessive daytime sleepiness was evaluated by the Epworth sleepiness scale. Results: Characteristic symptoms of narcolepsy observed in this study included excessive daytime sleepiness (n=23, 100.0%), cataplexy (n=19, 82.6%), hypnagogic hallucination (n=5, 21.7%) and sleep paralysis (n=12, 52.2%). In nocturnal polysomnographic findings, stage 2 sleep and REM latency were found to be significantly decreased in narcoleptic patients compared with the control group, and were accompanied by significant increases in stage 1 sleep. Narcoleptic patients had lower scores than the control group on total number, Total Number-Total Error, Concentration Performance and Fluctuation Rate on the d2 test, which measures attention. Also, there were significant differences between the performance of patient and control groups on the B list of the K-CVLT, which measures verbal memory. Conclusion: Narcoleptic patients showed decreased attention and verbal memory performance compared to the control group; however, in many areas, narcoleptic patients still demonstrated normal cognitive function.

• Journal of Pharmacopuncture
• /
• v.10 no.2 s.23
• /
• pp.119-132
• /
• 2007

This study was performed to determine whether a pulse analyzer was useful 1) to characterize the variables of pulse wave of cerebral infarction patieno (CI), compared with those of healthy subjects, as well as 2) to determine Sasang Constitution in CI and healthy subjects. 1. Calibrated in Gwan, the amount of energy(Energy), height of main peak(H1), height of aorticvalley(H2), height of aortic peak(H3), total area of pulse wave(At), and area of main peak width(Aw) of the CI group were higher than those of the healthy group. 2. Calibrated in Cheek, Energy, H1, H2, H3, height of valve valley(H4), At, Aw, and main peak angle(MPA) of the CI group were higher than those of the healthy group. 3. Among the healthy (subjects) group, Taeumin showed the highest contact pressure(CP) and height of valve peak(H5) calibrated in Chon. The main peak width divided by whole time of pulse wave(MPW/T) calibrated in Gwan and Cheok, was highest in Soyangin and was lowest in Taeumin. The H3 divided by H1(H3/H1) and the time to valve valley minus the time to main peak and divided by T[(T4-T1)/T] calibrated in Cheek were highest in Soyangin. The time to main peak(T1) was longest in Soumin. 4. Among the CI group, At calibrated in Chon was widest in Taeumin and was narrowest in Soumin The time to aortic peak(T3) calibrated in Cheek was longest in Soumin and was shortest in Soyangin. The time to valve peak(T5) was shortest in Soyangin. 5. There were main effects of cerebral infarction in the area of systolic period(As) and area of diastolic period(Ad) calibrated in Chon, Energy calibrated in Cwan, and Energy, H1, H2, H3, (H4+H5)/Hl, and MPA calibrated in Cheek. 6. There were main effects of Sasang Constitution in (T4-T1)/T, area of systolic period(As), and Ad calibrated in Chon. 7. The interactions between the cerebral infarction and Sasang Constitution were observed in H5/H1 , T, At, As, Ad, and MPA calibrated in Chon, H4, T4, (T4-T1)/T, As, and Ad calibrated in Cwan, and 74,75, and MPW calibrated in Cheok. Therefore, we concluded that pulse analyzer was useful to determine the risk degree of cerebral infarction and Sasang Constitution.

• Korean Journal of Environment and Ecology
• /
• v.31 no.4
• /
• pp.349-364
• /
• 2017

Duckweed family (Lemnaceae Martinov), including the genus Lemna L., is a typical floating aquatic perennial plant, and about five genera and 40 species in the family are in wide distribution around the world except the polar regions. The genus Lemna is the smallest and the simplest plant among the angiosperms. It has a characteristic of doubling every three days with fast vegetative propagation, which helps the organisms to increase in rapid growth. As such, the plant is ideal for environmental pollution assessment and toxicity test. Although taxonomists and scholars have used different scientific names for the species, many of them have agreed that there is only one member of species of the genus Lemna in Korea. Paying attention to the external morphological variation observed in the Korean genus Lemna, we conducted a molecular phylogenetic analysis to identify the entity of the Korean Lemna species and to investigate the possibility of two or more members of the species existing in Korea. We determined and aligned the DNA sequences of the atpF-H region of the chloroplast DNA in 37 populations of the nationally distributed Lemna species. The results showed that the sequence length of the cp DNA atpF-H region was 463-483 bp, the length of the aligned sequences was 488 bp, and the number of variation site in nucleotide sequences was 47. There were two types of aligned sequences of the cp DNA atpF-H region from 37 populations of Lemna species in Korea. The maximum parsimony analysis revealed that the Korean Lemna consists of two clades, and one of them had two subclades. The results suggest that, contrary to the general understanding, at least two taxa (L.aequinoctialis, L.minor) exist in Korea.

• Korean Journal of Poultry Science
• /
• v.43 no.1
• /
• pp.15-20
• /
• 2016

This research was carried out to determine the effect of Cudrania tricuspidata fruit (CTF) on the performance of laying hens, egg quality, yolk fatty acid composition, Immunoglobulin G (IgG) and blood composition. A total 288 Brown Nick laying hens of 48 weeks old replaced into 4 groups with 4 replicates of 18 birds in each. Treatments were added with 0, 0.25, 0.5, 1.0% CTF containing dried seed and pulp. Metabolizable energy (ME) and crude protein (CP) were 2,800 kcal/kg and 16.0% in basal diets, respectively. Egg production and daily eggmass were significantly increased in 1.0% CTF addition treatment compared to those of other treatments (P<0.05). Egg weight and feed intake were not different among treatments. Feed conversion ratio showed the lower result in 1.0% CTF treatment than other treatments (P<0.05). Eggshell color was not influenced by the addition of CTF. Albumin height, Haugh unit and eggshell breaking strength was not statistically different, but seemed to be higher as dietary CTF addition increased. Yolk color was increased as dietary CTF increased and was the highest in 1.0% CTF group (P<0.05). Fatty acids were not shown the consistency in yolk. Blood cholesterol and triglyceride (TG) of birds fed CTF were significantly low compared to those of control. IgG was also statistically higher in CTF treatments than control (P<0.05). As the results of this experiment, the addition of 1% CTF would be the most effective on performance and egg quality, whereas the 0.25% CTF addition in basal diets seemed to be optimum to improve the blood cholesterol, TG,high density lipoprotein cholesterol (HDL-CHOL), IgG in laying hens.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.46-52
• /
• 2009

Statement of problem: Recently, titanium has become popular as superstructure material in implant dentistry because titanium superstructure can be easily milled by means of computer-aided design and manufacture (CAD/CAM) technique. But retention form such as nail head or bead cannot be cut as a result of technical limitation of CAD/CAM milling and bond strength between titanium and porcelain is not as strong as that of conventional gold or metal alloy. Purpose: The objective of this study was to evaluate the shear bond strength of three different materials: heat curing resin, composite resin, porcelain which were bonded to grade II commercially pure Titanium (CP-Ti). Material and methods: Thirty seven CP-Ti discs with 9 mm diameter, 10 mm height were divided into three groups and were bonded with heat curing resin (Lucitone 199), indirect composite resin (Sinfony), and porcelain (Triceram) which were mounted in a former with 7 mm diameter and 1 mm height. Samples were thermocycled for 1000 cycles at between $5-55^{\circ}C$. Shear bond strength (MPa) was measured with Instron Universal Testing Machine with cross head speed of 1 mm/min. The failure pattern was observed at the fractured surface and divided into adhesive, cohesive, and combination failure. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: Lucitone 199 ($17.82{\pm}5.13\;MPa$) showed the highest shear bond strength, followed by Triceram ($12.97{\pm}2.11\;MPa$), and Sinfony ($6.00{\pm}1.31\;MPa$). Most of the failure patterns in Lucitone 199 and Sinfony group were adhesive failure, whereas those in Triceram group were combination failure. Conclusion: Heat curing resin formed the strongest bond to titanium which is used as a CAD/CAM milling block. But the bond strength is still low compared with the bond utilizing mechanical interlocking and there are many adhesive failures which suggest that more studies to enhance bond strength are needed.