• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.624-627
• /
• 2002

A study on machining electrode for LEO(Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacture of semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on the shaped end-mill geometry and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooting and machina error can make the electrode accurate by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.323-326
• /
• 2004

In this study, the inspection path which is considered to free collision is generated by offset surface. When the inspection is executed, the consideration of machine dynamic error increases a precision. Dynamic error is measured on CNC machine bed changing of weight work price. Offset surface is safety space about collision. Because the danger of probe-collision is excluded in Offset surface, it is possible to rapid feed of probe and reduced inspection time. The Program which is possible to simulate using CAIP and is confirmed through actual experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1271-1277
• /
• 2018

This paper deals with a voltage sag assessment based on a voltage monitoring program. The voltage sag performance at a specific site can be evaluated by analyzing voltage monitoring data recorded for a long time period. Although an assessment based on voltage monitoring is an effective way to understand voltage sag performance at a measurement site, the statistical confidence of voltage sag frequency estimation heavily depends on the length of monitoring period and the number of recorded events. Short monitoring period and insufficient recorded data can not provide a reliable assessment result. This paper proposes a compensation assessment method by combining a computer simulation approach for in case that monitoring period and data are not enough for a valid assessment.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.287-293
• /
• 2006

This study presented the following things; First, the principle of marketing should be applied in order to invite and keep able employees. Because the wants of employees are much different from person to person, the way of strategic marketing planning for internal customers should be done as it did for external customers. Second, the way of measuring in the result of implementing internal marketing and the way of standardizing service should be developed for the planning and implementation of effective internal marketing strategies. The compensation and reward to employees for the result of implementing internal marketing program should be done continuously.

• International Journal of Contents
• /
• v.13 no.2
• /
• pp.14-20
• /
• 2017

The purpose of this study was to investigate the association of obesity with medical care use and costs according to overall diseases, cerebrovascular diseases (CVD), ischemic heart disease (IHD), hypertension (HTN) and diabetes mellitus (DM). The final sample was a group of persons who were free of diseases mentioned above and were not underweight. Their baseline screening program data and health insurance contribution data were connected with a 7-year medical claim database. The participants were classified according to their baseline BMI into normal, overweight, obese, and severely obese groups. Given the disease type, the total costs of DM showed the largest difference in each obesity group in both males and females. Also, the pharmacy costs for DM were more relevant than any other type of service to the obesity level. Considering the high prevalence of obesity and the relevantly increased medical care use and costs, there is a need for reduction in medical costs through obesity prevention efforts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1218-1223
• /
• 2007

A surface micro machined angular rate sensor utilizing a vibrating MEMS structure on a silicon has been developed. These tuning fork angular rate sensors are extremely rugged, inherently balanced, and easy to fabricate. The device is fabricated using a temperature compensation method based on automatic gain control technique. A linearity of approximately 0.6%, limited by the on-chip electronics has been obtained with this new sensor. Tests of the sensor demonstrate that its performance is equivalent to that required for implementation of a yaw control system. Vehicle handling and safety are substantially improved using the sensor to implement yaw control.

• Journal of Korean Academy of Nursing Administration
• /
• v.14 no.4
• /
• pp.467-476
• /
• 2008

Purpose: The purpose of this study was to examine the factors determining salary level of hospital. Methods: This study performed secondary analysis on the existing data. Data were collected from May 1, 2005 to September 30, 2005. Analysis of the results was carried out using SPSS win 12.0 program for t-test, ANOVA and multiple regression. Results: For the determinant factors on the level of nurse's salary, the R2 for this whole regression model was .72, indicating that approximately 72% of the variance in salary level of the nurses was accounted for by the linear combination of these three independent variables, the size of hospitals, the characteristics of a fund, and nursing delivery system. Conclusion: Salary is a major part of human resource management and is compensation for the labor of nurses and is a motive to nurses. Each hospital's salary needs to be more affordable to nurses.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.488-489
• /
• 2008

Based on the fact that renewable energies such as photovoltaic, wind power, etc. are increasingly used in distribution systems recently which affects overvoltage, this paper implements an unified power flow controller(UPFC) to compensate voltage swell. The implemented scheme employs an ac chopper and a low-pass filter along with a series transformer. The ac chopper converts the amplitude of the voltage down to the nominal value. The low pass filter makes the rough waveform of the output voltage of the ac chopper due to switching smoothly by eliminating harmonics. To verify the effectiveness of the implemented UPFC, the results by Electro-Magnetic Transients Program(EMTP) are presented for various overvoltage cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.231-231
• /
• 2000

It is proposed that a novel method which can compensate the time delay occurs in overall system, when voltage and current is measured, owing to LPF, hysteresis control inverter and microprocessor program computation time. The Proposed scheme estimates the time delay using the difference between Q-axis stator current command and time delayed Q-axis stator current in synchronous reference frame, and compensates the time delay of voltage and current using angular displacement of DQ transformation. The proposed scheme compensates accurately the time delay occurs in overall system. Therefore performance of vector control system is improved highly and it is verified by simulation and experiment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.836-844
• /
• 2001

For the radiant floor heating system, the possibility of suboptimal prediction control was investigated by computer simulation and experiment. For this study, TRANSYS program was used and an experimental facility consisting of two rooms (3$\times$4.4$\times$2.8m) was built. The facility enabled simultaneous comparison of two different control strategies which implemented in a separate room. Results showed that outdoor air temperature prediction control was superior to the conventional outdoor air temperature compensation control for radiant floor heating system. However, more research for fine prediction of outside air temperature was required in the future.