• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.252-259
• /
• 2011

This paper is focused on dynamic modeling and control system design as well as vision based collision avoidance for multi-rotor unmanned aerial vehicles (UAVs). Multi-rotor UAVs are defined as rotary-winged UAVs with multiple rotors. These multi-rotor UAVs can be utilized in various military situations such as surveillance and reconnaissance. They can also be used for obtaining visual information from steep terrains or disaster sites. In this paper, a quad-rotor model is introduced as well as its control system, which is designed based on a proportional-integral-derivative controller and vision-based collision avoidance control system. Additionally, in order for a UAV to navigate safely in areas such as buildings and offices with a number of obstacles, there must be a collision avoidance algorithm installed in the UAV's hardware, which should include the detection of obstacles, avoidance maneuvering, etc. In this paper, the optical flow method, one of the vision-based collision avoidance techniques, is introduced, and multi-rotor UAV's collision avoidance simulations are described in various virtual environments in order to demonstrate its avoidance performance.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.275-285
• /
• 2015

To improve the efficiency of carrier sense multiple access (CSMA)-based medium access control (MAC) protocols, CSMA with collision resolution (CSMA/CR) has been proposed. In the CSMA/CR, a transmitting station can detect a collision by employing additional sensing after the start of a data transmission and then resolve the next collision that might occur by broadcasting a jam signal during a collision detection (CD) period. In this paper, we analyze the delay of a CSMA/CR based on a generic p- persistent CSMA model and obtain the minimum achievable delay of the CSMA/CR by finding the optimal length of the CD period according to the number of contending stations. Through this delay analysis, we also investigate the throughput-delay characteristics of the CSMA/CR protocol according to various parameters. Analysis and simulation results show that the CSMA/CR has a considerably lower delay and its throughput-delay characteristic is significantly improved than the conventional CSMA/CA and wireless CSMA/CD protocols.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.127-132
• /
• 2018

One of the key issues in the Unmanned Aerial Vehicle (: UAV) technology is the collision avoidance. Specifically, the collision avoidance among multiple UAVs is critical to expand UAV applications to civil sector where large number of UAVs could be operated in the limited space. In this paper, we introduce a collision avoidance scheme based on Flying Ad Hoc Network (: FANET). The proposed scheme adopts collision avoidance mechanism used in wireless data communication networks. Using this scheme UAVs can not only communicate conventional user information, but also share flight information to avoid collision.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3350-3356
• /
• 2013

Quasi-classical trajectory calculations have been carried out for the reaction H+HS by using the newest triplet 3A" potential energy surface (PES). The effects of the collision energy and reagent initial rotational excitation are studied. The cross sections and thermal rate constants for the title reaction are calculated. The results indicate that the integral cross sections (ICSs) are sensitive to the collision energy and almost independent to the initial rotational states. The ro-vibrational distributions for the product $H_2$ at different collision energies are presented. The investigations on the vector correlations are also performed. It is found that the collision energies play a postive role on the forward scatter of the product molecules. There is a negative influence on both the alignment and orientation of the product angular momentum for low collision energy at low energy region. Whereas the influence of collision energy is not obvious at high energy region.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.362-367
• /
• 2011

The collision-free path of a manipulator should be regenerated in the real time to achieve collision safety when obstacles or humans come into the workspace of the manipulator. A probabilistic roadmap (PRM) method, one of the popular path planning schemes for a manipulator, can find a collision-free path by connecting the start and goal poses through the roadmap constructed by drawing random nodes in the free configuration space. The path planning method based on the configuration space shows robust performance for static environments which can be converted into the off-line processing. However, since this method spends considerable time on converting dynamic obstacles into the configuration space, it is not appropriate for real-time generation of a collision-free path. On the other hand, the method based on the workspace can provide fast response even for dynamic environments because it does not need the conversion into the configuration space. In this paper, we propose an efficient real-time path planning by combining the PRM and the potential field methods to cope with static and dynamic environments. The PRM can generate a collision-free path and the potential field method can determine the configuration of the manipulator. A series of experiments show that the proposed path planning method can provide robust performance for various obstacles.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2012

Collisions between tags greatly reduce the identification speed in radio frequency identification (RFID) systems and increase communication overhead. In particular for an active RFID system, tags are powered by small batteries, and a large number of re-transmissions caused by collisions can deteriorate and exhaust the tag energy which may result in missing tags. An efficient collision-free arbitration protocol for active RFID systems is proposed in this paper. In this protocol, a new mechanism involving collision detection, collision avoidance, and fast tag access is introduced. Specifically, the pulse burst duration and busy-tone-detection delay are introduced between the preamble and data portion of a tag-to-reader (T-R) frame. The reader identifies tag collision by detecting pulses and transmits a busy tone to avoid unnecessary transmission when collision occurs. A polling process is then designed to quickly access the collided tags. It is shown that the use of the proposed protocol results in a system throughput of 0.612, which is an obvious improvement when compared to the framed-slotted ALOHA (FSA) arbitration protocol for ISO/IEC 18000-7 standard. Furthermore, the proposed protocol greatly reduces communication overhead, which leads to energy conservation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.

• Korean Institute of Interior Design Journal
• /
• v.26 no.1
• /
• pp.63-74
• /
• 2017

This study is for the characteristic of expression of exhibition presentation in 'The Korean peninsula' which is the Golden Lion Winner at the Venice Biennale in 2014. The Korean peninsula provides two opposite political and economic systems and adaptations of modernism through various multi media images. The curator, Minsuk Cho, presented cinema montage image of Collision for analyzing dynamic exhibition organization and provides the foundation of his theory from Bergson's image and duration to Deleuze's movement-image and time-image which is mentioned from Deleuze's book "cinema 1" and "cinema 2". Furthermore, the Korean peninsula has showed perception-image and affection-image from Eisenstein & Vertov's cinemathology and systemized exhibition presentation. The montage of Collision has maximized the movement from the variety and complexity in a collision and it made difference between information images which are space, time, emotion, intelligence, the tumult between subjectivity and objectivity, fragments from reorganizing itself, and distribution and art images. The limit of montage of Collision's dialectic is not only visual but also space from organic organization but the Korean peninsula overcomes its limit and shows leap of tactile perception and time-reflection from the montage of Collision's dialectic. Therefore, the exhibition of the Korean peninsula presents the conviction of adaptations of modernism.

• Journal of Navigation and Port Research
• /
• v.31 no.4
• /
• pp.281-287
• /
• 2007

Human factors have been considered the primary reason of marine accidents. Especially, the collision between vessels is mostly mused by human behavior. However, there have not been many researches to clarify the reason of marine accidents mused by human factors quantitatively. In order to understand human factors and to enhance safe navigation systematically, using a full mission ship-handling simulator, we've investigated the characteristics of avoiding behavior taken by mariners. Further in order to apply the characteristics more widely and effectively, it's necessary to formulate the standard behavior for ship-handling in the condition of collision avoidance. Is this study, therefore, we intended to propose the concept to model the mariner's standard behavior on the handling of collision avoidance as the first step. As a result, we confirmed the contents of information processing in ship-handling that mariner's generally taking to avoid collision.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1671-1677
• /
• 2018

In this research, the collision detection system based on insect's visual interneuron has been designed. The lobula giant movement detector (LGMD) corresponds to the movement value that increases in direct collision process. If the collision is detected by the LGMD only, it could generate a crash warning even in a non-collision situation, resulting in a lot of false alarms. Directionally sensitive movement detectors (DSMD) are directionally sensitive algorithm based on the elementary movement detectors (EMD) in four directions (up, down, left, and right). In this paper, we propose an efficient VLSI architecture for a realtime collision detection system that is robust to the surrounding environment while improving accuracy. The proposed architecture is synthesized with Dongbu Hightech 110nm standard cell library and shows 333MHz of maximum operating frequency and requires 8400 gates with about 16.5KB of internal memories.