• Journal of Soil and Groundwater Environment
• /
• v.15 no.4
• /
• pp.30-38
• /
• 2010

This study was conducted to determine the potential applicability of slowly released molasses (SRM) to treat nitratecontaminated groundwater. SRM was made by dispersing molasses in hydroxy propyl methyl cellulose-silicamicrocrystalline cellulose matrix. Column test indicated that SRM could continuously release molasses with slowly decreasing release rates of $64.6mg-COD/L{\cdot}h$ up to 65 hrs, $12.1mg-COD/L{\cdot}h$ up to 215 hrs, and $4.4mg-COD/L{\cdot}h$up to 361 hrs. A batch test using an isolated indigenous heterotrophic denitrifier Pseudomonas sp. KY1 having nitrite reductase (nirK) and liquid molasses demonstrated that the bacterium decreased 100 mg-N/L of nitrate to less than 10 mg-N/L at the C/N ratio of 10/1 in 48 hours. In a Pseudomonas sp. KY1-attached Ottawa sand column which continuously received molasses from a SRM-containing reservoir, the bacterium successfully removed nitrate from 20 mg-N/L to 3 mg-N/L during the 361 hours of column operation. The results showed the possibility that SRM can be used as a reliable, longterm extra carbon source for indigenous heterotrophic denitrifiers.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.13-26
• /
• 2007

Changes in the characteristics of dissolved organic matter was studied at selected stations in the Nakdong river basin using physical and chemical methods. Characteristics of dissolved organic matters were analysed and assessed. Production of disinfection byproducts were also investigated. 1. Result of relatedness study among each items of analyses showed that relatedness on BOD values were highest with cattle excrement treatment facilities where there is no synthetic organic materials and relatedness on $COD_{Mn}$ were highest at the mainstream Nakdong river. In case of $COD_{Cr}$ (which has more oxidative power than $COD_{Mn}$), the values were higher in the sidestreams indicating the higher content of recalcitrant compounds. The relatedness values for the $UV_{254}$ also showed higher values in the sidestreams and treatment facilities than mainstream indicating the presence of organic aromatic compounds. 2. Ratio of DOC on total organic carbon were higher in the mainstream which is attributable to the influent particulate organic materials produced by agricultural activities. The values were 10-15% higher in the mainstream compared with sidestreams. 3. Result of biodegradability test indicate that concentrations of recalcitrant DOC were higher in the sidestreams than in the mainstream. The values of recalcitrant DOC were higher with the forest stream indicating the effect of soil oriented humic substances. 4. Result of THM production test carried out at 10 stations in the Nakdong river show that $CHCl_3$ was detected with the highest value and the value was highest at Waekwan station.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.128-134
• /
• 2013

In the summer season (June~August) during the study period of Lake Doam, average concentrations of major water quality parameters, COD, SS, TN, and TP were 4.0, 16.2, 3.129 and $0.077mg\;L^{-1}$, respectively, and Chl-a was $11.8mg\;m^{-3}$. The result has indicated that Lake Doam was a meso-eutrotrophic lake. Lake Doam data from the summer season (June~August), precipitation from 2001 to 2012, and water quality (COD, SS, TN, TP, Chl-a etc.) of seven years (2001, 2002, 2004 and 2009~2012), were statistically analyzed for long-term trends by Mann-Kendall test and Sen's slope estimator methods. The statistical results showed that precipitation, SD, COD, TN, $NO_3-N$, $NH_3-N$ and Chl-a had decreasing trends, and EC, turbidity, SS, TP and DIP had increasing trends. Suspended solids and total phosphorus were directly affected by precipitation. In the case of suspended solids, more aggressive and constructive plans need to be implemented than the current turbidity reduction project to achieve the targeted water quality ($5mg\;L^{-1}$ of SS) in Lake Doam. In particular, we need to specify a project that considers the steep topographic characteristics of high, land farming areas and precipitation conditions of the Lake Doam watershed, which can increase the efficiency of a turbidity reduction project.

• Advances in environmental research
• /
• v.2 no.3
• /
• pp.229-243
• /
• 2013

Coagulation-flocculation (CF) was tested coupled with an aerobic biofilter to reduce total petroleum hydrocarbon (TPHs) concentration and toxicity from petrochemical wastewater. The efficiency of the process was followed using turbidity and chemical oxygen demand (COD). The biofilter was packed with a basaltic waste (tezontle) and inoculated with a bacterial consortium. Toxicity test were carried out using Lactuca sativa var. capitata seeds. Best results for turbidity removal were obtained using alum. Considerable turbidity removal was obtained when using Opuntia spp. COD removal with alum was 25%, for Opuntia powder it was 36%. The application of the biofilter allowed the removal of 70% of the remaining TPHs after 30 days with a biodegradation rate (BDR) value 47 $mgL^{-1}d^{-1}$. COD removal was slightly higher with BDR value 63 $mgL^{-1}d^{-1}$. TPH kinetics allowed a degradation rate constant equal to $4.05{\times}10^{-2}d^{-1}$. COD removal showed similar trend with $k=4.23{\times}10^{-2}d^{-1}$. Toxicity reduction was also successfully achieved by the combined treatment process.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.666-672
• /
• 2008

Feasibility of simultaneous removal of organic matter, nitrogen and phosphorus was evaluated by applying AO$_2$ system to treat wastewater from a seafood processing plant. Treatability test was conducted by incorporating activated sludge from municipal sewage treatment plant with PU-AC media. Inflow concentrations of COD, TN, and TP were 198$\sim$1,240 mg/L, 75$\sim$577.4 mg/L, and 2.2$\sim$53.5 mg/L, respectively. Average removal efficiencies and outflow concentration of COD, TN, and TP were 86.5%, 65.7 mg/L; 81.4%, 53.1 mg/L; and 80.6% 4.07 mg/L, respectively. Stable operation was possible by increasing organic matter, nitrogen, and phosphorus loading rate to seafood wastewater treatment system composed of anaerobic and aerobic reactors. Used PU-AC media was proved to be biodegradable in this AO$_2$ system by maintaining high biomass concentration in the PU-AC media.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1576-1582
• /
• 1990

To examine small fatigue crack behavior, the crack opening displacement (COD) was measured for surface cracks in the range of few tens to hundreds .mu.m using the computerized Interferometric Strain/Displacement Gage (ISDG) which could measure the relative displacement with a resolution of 0.02 .mu.m. The load-COD record is stored and analyzed after the test to determined the opening load. Single-edge notched specimens, 2.3mm thick, of Al 2024-T3 were precracked at load ratios of 0.0, -1.0 and -2.0 to make small fatigue cracks. The opening loads were measured these small cracks and compared with those of long cracks. The opening load ratios for the short cracks are about 10% smaller than those for long cracks at positive R-ratios, but are about 100% smaller at negative R-ratios.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.55-61
• /
• 2012

The ability of clay mineral to remove non-point sources such as SS, COD, T-N. T-P in the urban runoff has been tested to develop the porous filter material. The diameter of 3mm ball type filters were made of clay minerals for the tests. The experiments were carried out to measure the concentration of non-point sources of contaminants with flow rate of effluents. The test results show that clay filter has good response to remove SS, COD comparing to those of activated carbon filter. Also the performance of the clay filter to remove T-N and T-P is almost the same when using the activated carbon filter.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.2
• /
• pp.203-210
• /
• 2013

In this study, cod bone were used as the main ingredient of a stock that can be eaten with Korean dried noodles. The stock was produced with heating for 30, 40, 50, 60, or 70 minutes using high-pressure extraction methods. Moisture content, chromaticity, pH, sugar content, salinity, mineral contents, quantitative analysis, and overall acceptance were studied to determine the optimal heating time. In our result, S1 the showed highest water contents 98.10%, while S5 showed the lowest moisture content (97.47%). There were no significant difference in pH between samples, while salinity and sugar content increased with increases in heating time. In terms of mineral contents, sodium and potassium showed proportional difference with increases in heating time, however, magnesium, calcium, and iron did not change. The results from a quantitative analysis test showed that transparency, fishy smell, delicate flavor, savory flavor, salt taste, and umami taste became stronger with increases in heating time increase. From the above results, the overall taste of the stock increases with increases in high-pressure heating time. Specifically, S4 high-pressure heating scored the highest on appearance, flavor, taste, after-taste, and overall acceptance. Thus, 60 minutes of high-pressure heating time is most desirable when producing stock with cod bones as a main ingredient.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.107-115
• /
• 2011

The purpose of the study is to analyze the environmental characteristics of fish acute toxicity that is dependent on the harmfulness of ACQ (Alkaline Copper Quat)-Treated Wood and Oryzias latipes mortality in a comprehensive way, provide objective verification method on the eco-toxicity and environment-friendliness of landscaping materials and methods, and utilize it as a basic datum for evaluation criteria. The main results are summarized as follows : 1. As a result of analysis on the harmfulness characteristics, each experimental plot showed different values respectively. In particular, it has been found that in proportion to the volume of testing materials, COD and Cu increases at a constant rate, compared to the input water. In the plot C with three testing materials, COD increased 67 times more than that of the input water, and Cu increased up to 12.36mg/L. 2. In case of fish toxicity, plot C, B, A all showed a mortality rate of 100%, indicating that fish toxicity is strong. In particular, the mortality rate of each plot within the initial time of one and a half hour showed clearly, which suggests that the fish toxicity is influenced by the increased concentration of hazardous substances depending on the volume ratio of testing materials. 3. As a result of comparison and analysis on the harmfulness and fish toxicity, the harmfulness showed different values on each experimental plot but, we found that the changing rate of values of toxicity of COD and Cu is mutually similar to that of mortality in the initial hour according to the experiment of fish toxicity, which shows that COD and Cu are major factors to increase fish toxicity.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.69-76
• /
• 2021

The purposes of this study were to evaluate the removal characteristics of COD, Ni, and P and to derive appropriate operating conditions for the plating wastewater according to NaOCl reaction time and pH operating conditions in the BPC unit process during the plating wastewater treatment process. As a results of evaluating the removal characteristics for raw wastewater by each BPC unit process, the removal efficiencies of COD, Ni and P in BPC 1-1 unit process were 72.8%, 99.1%, and 100.0%. Therefore, the proper reaction time of NaOCl was derived as 21.1 minutes. In order to maintain the +800 mV ORP and the reaction time of 20 minutes, the temporary injection and continuous injection of NaOCl in the BPC unit process were 13.7 mL and 18.7 mL, respectively. It was found that the temporary injection method of NaOCl reduced the chemical cost by 36.5% compared to the continuous injection method. Also, Ni showed the highest removal efficiency of 97.8% at pH 10.5. On the other hand, P showed a removal efficiency of 57.4% at pH 10.0.