• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.5-12
• /
• 2001

The physical characteristics and contaminant level of the dredged material generated by the channel maintenance and water quality improvement was analysed in a series of the study of the beneficial uses of dredged material in harbor. Dredged materials were sampled at Kunsan, Kohyun, Samchunpo, and Pohang Harbors and tested in the laboratory(leaching Test). From the experimental results, the specific gravity does not shows large differences, while almost grains are composed of silts and oyster shells except Pohang harbor containing gravels. The COD release rate and ignition loss is high in Kunsan dredged materials because of the watershed pollutants loads. The nutrient release rate is also relatively high. The release concentration of the heavy metals shows the highest values on Zn, Pb, Cd, Cu constituents at Kohyun, Kunsan, Samchunpo, Kunsan, respectively.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.89-101
• /
• 2018

The purpose of this study was to evaluate the variation of water quality in the Nakdong River by the Four major river projects. For this purpose, the nearest upstream water quality monitoring stations were selected and water quality data such as BOD, COD, SS, TN, TP, and TOC were collected for the before Four major river project(from January 2003 to November 2008), during the project(from September 2008 to April 2012) and after the project(from May 2012 to September 2017). As a result, the concentration of DO, BOD, COD, TN, and TOC after the project tend to be higher than the before project period. On the other hand, the SS and T-P values decreased after the project. Spatial analysis of BOD, COD, and TOC, which have large changes in water quality factor, by water quality grade, showed a tendency that water quality grade after the project was worse than before the project.

• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.880-884
• /
• 1994

An indirect spectrophotometric method, presumably heretofore unmentioned, for the rapid determination of COD in the presence of chloride of high concentration is described. The alkaline sample is refluxed to react with a definite amount of permanganate, present in excess. A photometric measurement at 535 nm for the extent of the fading of the permanganate color after refluxing completes the procedure. The optimum conditions which give the absorbance-concentration plot the maximum linearity and slope in the range of 0∼5 ppm COD are as follows: reflux at $100\circC$ for 10 min in the presence of 0.15 mM permanganate and 0.2% NaOH with a sample size of 5 ml. An overall running time was less than 15 min. The t-test reveals that the proposed method is not significantly different from the official method.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.589-597
• /
• 2010

Steel structures have a higher probability of being damaged by fatigue than by other causes of deterioration. As such, their maintenance to prevent fatigue damage is essential to sustain their safety and performance during their service period. In their maintenance, the current state of their fatigue cracks must be assessed to determine appropriate reinforcement methods and the suitable time intervals of periodic inspections when fatigue cracks are detected. Determining the crack growth rate is a successful method of predicting fractures, but it requires technical knowledge on fracture mechanics and experience in numerical methods and software for finite element analysis. In this study, a fatigue crack growth test on through-thickness cracked steel plates was conducted to assess the crack growth rate without superior technical knowledge and experience. The relationship between the Crack Opening Displacement (COD) and the crack growth rate was found in relatively long fatigue cracks.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.439-445
• /
• 2008

Sawdust is considered one of the cheapest and abundantly available adsorbents, and it is not necessary to regenerate. The spent sawdust can be incinerated or reused as a fuel. The sawdust adsorption can be applied to the removal of color and metal cations from the wastewater. The aim of this study was to evaluate the adsorptive capacities of sawdust with respect to color, COD, SS, turbidity, metal cation from textile wastewater. Langmuir, Freundlich, BET and Sips adsorption isotherm were obtained for the sawdust adsorption of Fe(III). The effects of particle size and amount of sawdust on the adsorption of Fe(III) were also studied. COD, SS, color, turbidity and Fe(III) removal efficiencies were examined at the continuous fixed-bed adsorption test. It was showed the removal efficiencies of SS 50.0%, Fe(III) 25.0%, turbidity 79.4%, color 48.6% and COD 50.9%. In addition, the changes of surface structure between before and after adsorption were investigated through SEM analysis. It is confirmed that the waste sawdust can be successfully used as an adsorbent for wastewater treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.397-402
• /
• 2006

The treatment characteristics of leachate produced from pretreatment facilities like composting and feeding were investigated in a mesophilic anaerobic treatment. Experiments were performed in two phase which were acidification and methane fermentation. The acidification step was optimized for OLR from 1 to $4.5kg\;COD/kg\;VS{\cdot}day$ without adding NaOH. As experiment dates became longer, the solubilization ratio of particles increased up to 30% over 70 days. TVA was generated up to maximum 9,970mg HAc/L at OLR of $2kg\;COD/kg\;VS{\cdot}day$. But TVA was generated to minimum 6,519mg HAc/L at OLR of $4.5kg\;COD/kg\;VS{\cdot}day$. The acidification ratio was analyzed from 10.9% to 3.8% at OLR of $2kg\;COD/kg\;VS{\cdot}day$ and $4.5kg\;COD/kg\;VS{\cdot}day$ respectively. After 55 days, salt contents in the acid fermenter were accumulated and stabilized at the concentration of 3,150mg/L. Sodium ion($Na^+$) concentration was stabilized at 1,300mg/L. At methane fermentation step, biogas was generated up to 750ml and 937.5ml at the feeding volume of 20ml and 25ml respectively for acid fermented liquid during 25 days. About 80% of total biogas was generated during early 15 days and 95% were generated during 18 days respectively. After 25 days of the BMP test, acetic acid was removed approximately 97% and 98%, in case of those two experimental conditions.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.118-124
• /
• 2005

The oxygen solubilized device(O.S.D) and standardized microorganism culture system is more efficient than physical and chemical purification techniques in closed water. This study was to determine how the O.S.D and standardized culture system is efficient in purification capacity in closed water based on the lab scale and pilot plant. In the batch test, inducing the quantitative results from pilot plant operation condition, removal efficiency of COD and TN were about 48.3% and 35% respectively, while SS and chlorophyll-a were 94.9% and 68.7%. The pilot plant results showed that suspended solid(SS) and chlorophyll-a removal efficiency were 60% and 59% respectively, due to coagulation characteristics by standardized culture. Total nitrogen(TN) and total phosphorus(TP)showed good effect for the purification of target pond water quality from field data. Additionally, released velocity was determined in control condition of $5.31mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $2486.8mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. Otherwise, phosphate and COD reflux in the aeration and microorganism condition was showed $-9.95mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $-397.88mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. This technology is the most effective not only removal of SS and chlorophyll-a but also control of phosphate and COD release which is very important phenomena in evaluating water quality in closed water like a reservoir and pond.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.3
• /
• pp.7-13
• /
• 1993

Fracture behavior of pre-cracked compact tension specimens made of AISI 4130 steel was investigated using acoustic emission (AE) and ultrasonic C-scan measurements. While each specimen was loaded up to a certain level, various acoustic emission parameters were recorded together with the crack opening displacement (COD). An elastic-plastic finite element analysis was performed to calculate COD and the damage (plastic) zone size ahead of crack tip. Ultrasonic C-scans, in a pulse-echo, immersion mode, were done for mapping the damage zone size. The agreement between the finite element results and the measured COD was satisfactory. Based on AE results, the test specimens were found to show ductile behavior. The slope of the total ringdown counts vs. COD curve was useful to determine the crack initiation. The preliminary C-scan images showed evidence of changes in the amplitude of ultrasonic signal in the damaged region, and the shape and size of the damage zone matched qualitatively with the finite element results. A further work on the damage zone sizing was also pointed out.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2002

Submerged membrane bioreactor(SMBR) and reverse osmosis(R/O) systems treated dye wastewater for reusing of industrial water. The permeate fluxes of SMBR at 20-25 cmHg of lab. test and field test were 10 LMH($1/m^2$.hr) all test. Removal efficiencies of CODcr, $COD_{Mn}$ and T-N were 93%, 90% and 60% in the SMBR, respectively The advanced treatment of combined process(SMBR+R/0) was accomplished for increasing the removal efficiency of non-biodegradable materials and T-N. Therefore, the removal efficiency of T-N obtained in 80% above, then nitrogen concentration was under 15 mg/L. The combined process(SMBR+R/0) was suitable to reuse of the dye wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.152-158
• /
• 2015

This paper investigated the membrane fouling potential at the state of passive adsorption which is no permeation with the test modules on COD (Chemical oxygen demand) loading rates, examined the recovery rate and resistance on membrane fouling by three cleaning manners of hydrophobic membrane in a bioreactor. The results showed that high COD loading led to the increase of extra-cellular polymeric substances and filtration resistance. The permeability resistance from 1st day to 63rd day was getting increased, however, the value of permeability resistance after 63th day during the operation period was almost same level at three COD loading rates, it was due that the biomass adhesion on membrane surface at the state of passive adsorption reached to the critical state. Also, the final recovery rates after three cleaning manners were 78%, 72% and 69% at the COD loading concentrations of 250 mg/L, 500 mg/L and 750 mg/L respectively, and then recovery rate by physical cleaning at Run 2 and Run 3 was decreased after 40th day, it proved that biomass cake, which is not easily removed, was formed on the membrane surface because of high COD loading rate and EPS concentration.