• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2017

Recently, there has been a continuous researches on solders having sophisticated and improved performance due to demand for high-density and miniaturization of electronics, and development of solder for automotive electronics which can be used in harsh environment. When developing a new solder alloy, there is a wettability of solder on substrate for things to consider, and the wetting balance test is one of the methods for measuring that one. In this paper, the wetting balance test is introduced, and the calculus of the surface tension of solder and the contact angle between solder and substrate using wetting curve obtained is introduced too. In detail, the principle and test method of the wetting balance test, the introduction of the parameters with important meaning in the wetting curve, the method of calculating the contact angle as well as the surface tension of the solder using the shape of the solder meniscus.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.115-122
• /
• 2008

The hydrosilylation is an addition reaction of Si-H bond to unsaturated double bonds, which provides a convenient mechanism to synthesize poly(dimethylsiloxane-co-methylsiloxane)copolymer having siloxy units in polymer backbone. In this study, Poly(dimethylsiloxane-co-methylsiloxane) copolymer was synthesized through the polymerization reaction of cyclopentasiloxane with poly(methyl-hydrogen) siloxane. Silicone-hydrogen functional group of the poly(dimethylsiloxane-co-methylsiloxane) copolymer was substituted to the alkyl groups by hydrosilylation. And their structure was analyzed with FT-IR, H-NMR and GPC instruments, respectively. Surface tension of the synthetic compounds is increased from 22dyne/cm to 25dyne/cm according to increase additional EO moles. The cmc which was evaluated by surface tension was ranged $10^{-5}$ to $10^{-4}mol/L$ and it was decreased according to increase of dimethyl siloxyl content. HLB number of these surfactants was evaluated 9.5 to 11.5 range. These silicone surfactants is applied to self-emulsifier defoamer and personal care products as surface tension depressant, emulsifier, foam control agent.

• 산업식품공학
• /
• 제15권2호
• /
• pp.175-181
• /
• 2011

초임계 $CO_2$유체를 이용하여 미강 중 표면활성물질을 추출하고 추출물의 표면활성능을 최적화하는 추출 조건을 반응표면분석법을 통해 조사하고자 하였다. 추출수율은 독립변수인 압력, 온도, 보조용매량이 많을수록 높았으며, 보조용매량이 추출수율에 가장 큰 영향을 주었다. 회귀분석을 통해서 얻은 최적 추출 조건은 추출압력 330 bar, 추출온도 $65^{\circ}C$, 보조용매량 250 g이었다. 표면활성능 지표인 계면장력은 추출압력과 추출온도가 증가할수록 그리고 보조용매량이 높을수록 낮았으며, 추출수율과 마찬가지로 보조용매량이 계면장력에 가장 큰 영향을 주었지만 추출압력과 추출온도 등의 변수에 의한 영향은 비교적 적었다. 회귀분석을 통해서 얻은 최적 추출 조건(낮은 계면장력)은 추출압력 350 bar, 추출온도 $65^{\circ}C$, 보조용매량 50 g이었다. 또한 D-optimal design을 통해 얻은 실험 결과를 바탕으로 회귀분석을 하였을 때 예측모델식은 실제 측정값과 비교해 높은 유의성을 나타내는 것으로 판단되었다. 보조용매량이 많을수록 극성 물질이 더 많이 추출되어 낮은 계면장력 값을 예상하였지만 실제 측정 결과 보조용매량이 가장 낮은 조건인 50 g에서 계면장력은 가장 낮게 측정되었다. 이의 규명을 위하여 TLC 및 HPLC 분석을 통한 추출물에 대한 성분 조사, 추출물을 이용한 유화액 제조, 유화액 특성 평가 등 추가 실험이 필요한 것으로 사료되었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권6호
• /
• pp.479-486
• /
• 2000

The aim of this study was to clarify the mechanism of the inhibitory action of carbon monoxide (CO) on contraction, by measuring cytosolic $Ca^{2+}$ level $([Ca^{2+}]_i)$ and ionic currents in guinea-pig ileum. CO (10%) inhibited 40 mM KCl-induced contraction and this effect was blocked by ODQ $(1\;{\mu}M),$ a soluble guanylyl cyclase (sGC) inhibitor. CO inhibited the 40 mM KCl-induced contraction without changing $[Ca^{2+}]_i.$ Cumulative addition of KCl induced a graded increase in $[Ca^{2+}]_i$ and muscle tension. In the presence of CO, cumulative addition of KCl induced smaller contraction than in the absence of CO. On the other hand, the increase in $[Ca^{2+}]_i$ induced by cumulative addition of KCl was only slightly decreased in the presence of CO, and the $[Ca^{2+}]_i-tension$ relationship shifted downwards. Using the patch clamp technique with a holding potential of -60 mV, we found that CO had little effect on the peak Ba currents $(I_{Ba})$ when voltage was stepped from -60 mV to 0 mV. In addition, CO showed no effect on the depolarization-activated outward $K^+$ currents in the all potential ranges. We conclude that CO inhibits smooth muscle contraction mainly by decreasing the $Ca^{2+}$ sensitivity of contractile elements via a cGMP-dependent pathway, not by involving L-type $Ca^{2+}$ and outward-potassium currents in guinea-pig ileum.

• The Korean Journal of Physiology
• /
• 제14권2호
• /
• pp.7-16
• /
• 1980

The effects of various inotropic interventions on the shape of the steady state length tension relation and the length-dependent activation process in cardiac muscle were studied. The influence of inotropic interventions upon the action potential was also observed. The range of varying muscle length was from the optimal length$(l_{max})$, where the active tension production is maximal, to 0.85 $l_{max}$. Changes in stimulus frequency or in external bathing Ca concentration constituted the inotropic interventions in this experiment. The papillary muscles were isolated from the rabbit right ventricles and perfused with $HCO-_3\;-buffered$ normal Tyrode solution which was aerated with $3%\;CO_2-97%\;O_2$ mixed gas and kept at $35^{\circ}C$. Resting Passive tension at $l_{max}$ was approximately 30% of the total tension and appeared from the muscle length of 0.90 $l_{max}$. The effect of stimulus frequency on the steady state level of developed tension was: As the stimulus frequency was increased from 0.1 to 0.5 Hz, there was little change in developed tension. As the frequency was increased further, to a value of about 3 Hz, tension increased steeply. Further increase of the frequency to 5 Hz had little additional effect on the developed tension. The length-tension curves for isometric peak tension became more steeper with the degree of potentiation by inotropic interventions. The relative steepness of the normalized length-tension curves where tension production was expressed as a percentage of maximal tension developed at $l_{max}$, varied inversely with the level of inotropic state and these curves were not superimposable one another. Thus at the stimulus frequency of 2 Hz or at the external Ca concentration of 8 mM, the relative decline in the developed tension for a given change in muscle length was considerably less than the decline observed at the frequency of 0.5 Hz or at the concentration of 2 mM Ca. Action potential duration was prolonged significantly as the frequency increased from 0.2 to 2 Hz, and this change in action potential duration was not observable on the changes in muscle length. There was a tendency of the hyperpolarization of membrane potential when the muscle length was shortened from $l_{max}$ to 0.95 $l_{max}$. These results support the hypothesis that there is a length-dependence of the activation process.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.87-95
• /
• 2005

The object of this study is to investigate the effect of joinability by using acoustic emission(AE) signals and doing a pattern recognition for weld heat affected zone(HAZ) in tensile testing. This study was carried out an SWS 490A high tension steel for electric shielded metal arc welding(SMAW), $CO_2$ gas arc welding and TIG welding. And correspondingly, the root openings are 3, 4 and 2.8mm. The results of the tensile test of weld HAZ come out electric shield arc welding $>\;CO_2$ gas arc welding > TIG welding in case of single welding. It is believed that this is a phenomenon where difference of its root opening or base metal thickness. Also, the technique of AE is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.40-48
• /
• 2004

The object of this study is to investigate the effect of joinability by using acoustic emission (AE) signals and doing a pattern recognition for weld heat affected zone (HAZ) in tensile testing. This study was carried out an SWS 490A high tension steel for electric shielded metal arc welding (SMAW), $CO_2$ gas arc welding and TIG welding. And correspondingly, the root openings are 3, 4 and 2.8mm. The results of the tensile test of weld HAZ come out electric shield arc welding > $CO_2$ gas arc welding > TIG welding in case of single welding. It is believed that this is a phenomenon where difference of its root opening or base metal thickness. Also, the technique of AE is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 한국임상수의학회지
• /
• 제14권2호
• /
• pp.238-243
• /
• 1997

체중이 700-750kg 인 4마리의 중종마에 70분동안 마취를 실시하여 동맥혈의 이 산화탄소 분압과 호기말 가스내의 이산화탄소 분압 사이의 관계를 관찰하였다. 마취도중 자발 호흡, 인공호흡 1(흡기시간 2.0초), 인공호흡 2(흡기시간 2.5초)를 각각 30분,20분,20분씩 실시하였으며 매 10분마다 동맥혈가스분석과 호기말 가스내 이산화탄소분압 측정을 실시하 였다. 동시에 혈압, 심전도, 체온측정을 실시하여 마취된 환축의 상태를 관찰하였다. 2주후에 자세를 달리하여(앙와에서 측와로) 같은 방법으로 재 실험하였다. 호기말 이산화탄소분압은 동맥혈에서보다 평균 10 mmHg 정도 낮은 양상을 보였으나 높은 상관관계를 보였으며 자세에 따른 유의적 차이는 업었다(앙와자세; r=0.949, 측와자세; r=0.920, P<0.01). 이러한 결과를 토 대로 조직에 창상을 줄 수 있는 동맥혈 가스분석 대신 비침습적방법인 호기말 가스내 이산화 탄소 분압을 측정하는 것이 환축의 모니터링에 효과적으로 사용 가능하다는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.497-501
• /
• 2015

Inkjet printing is a widespread technology, offering advantages such as high-quality decoration, a continuous process, and the accurate direct reproduction of patterns or pictures. In inkjet printing technology, the dispersion stability of ceramic ink is one of the most important factors. In this study, the dispersion stability of blue $CoAl_2O_4$ ink for ceramic inkjet printing is systematically investigated. Blue $CoAl_2O_4$ pigment was synthesized by a solid-state reaction and then milled to less than 300nm in size. In order to investigate the influence of the viscosity on the dispersion stability, two types of $CoAl_2O_4$ ceramic inks (termed here Blue L and Blue H) were prepared using different volume ratios of ethylene glycol and ethanol. The Blue L and Blue H ink solutions contained cetyltrimethylammonium bromide(CTAB) as a dispersive agent. The viscosity, surface tension and jetting stability of the $CoAl_2O_4$ ceramic inks were analyzed using a rheometer, a surface tension meter and a dropwatcher. The dispersion stability of the $CoAl_2O_4$ ceramic ink was investigated by a multiple light-scattering method. Blue H, a ceramic ink with higher viscosity, showed much better dispersion stability than the Blue L ceramic ink.

• 한국화재소방학회논문지
• /
• 제18권2호
• /
• pp.12-19
• /
• 2004

지구 환경 보호를 고려한 불활성가스계의 혼합물인 IG-541소화제가 개발되었다. 소화제는 물성에 의한 특성 및 효율성, 환경에 미치는 영향뿐만 아니라 안정성, 경제성을 고려해야한다. 이러한 불활성 가스계의 대체 소화제에 사용되는 $N_2$, Ar, $CO_2$의 순수 및 혼합물의 물성을 수집하여 비교하였다. 불활성 가스계 대체소화제의 물성 중 밀도, 점도, 표면장력을 온도에 대한 변화와 혼합물에서 몰 분율의 변화에 관해 비교하였다. 3성분계 혼합물 중 50% $N_2$, 40% Ar, 10% $CO_2$(mol. %)의 조성인 혼합물에서 밀도가 높고, 점도가 낮으며, 표면장력이 순수 성분 보다 높지 않아 소화제로서 유리하다.