• KSBB Journal
• /
• v.26 no.3
• /
• pp.206-210
• /
• 2011

The growth effect of Nannochloropsis oculata (N.oculata), unicellular microalgae, by alginate was investigated. Alginate was depolymerized with sulfuric acid ($H_2SO_4$) and heat ($121^{\circ}C$), simultaneously. Addition of 0.75% alginate oligomer depolymerized with 0.2 N $H_2SO_4$ showed the maximum yield and the growth rate of N. oculata. Chlorophyll content and reducing sugar was increased by alginate oligomer in a dose-dependent manner. Alginate oligomer promoted the growth of N. oculata, whereas the original alginate polysaccharides had no significant effect. Laminaria japonica (L. japonica) extract containing high level of alginate was also increased growth rate and chlorophyll content. $CO_2$ supply addition to L. japonica extract showed no change the growth rate, although addition to alginate oligomer showed prominently increased. N. oculata could use more saccharides in presence of $CO_2$ according to reducing sugar determination. From these results, it is useful to establish optimal condition for high cell density cultivation of N. oculata.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.423-432
• /
• 1993

The changes of quality of Fresh Shiitake (Lentinus edodes) was studied in this research work by investigating the effect of low $O_2$ content and high $CO_2$ content, well known as CA Treatment in storage, on the respiration rate and PPO Activity that was the main factor in Shiitake quality decay. CA Condition was conducted in 3 research periods that combined the $O_2$content(1%, 5% and 10%) and $CO_2$ content (5%, 10%, 15% and 20%) and air treatment as the control. The lower $O_2$content was the lower respiration rte that was showed in combination the lower respiration rate that was showed in combination of 20% $CO_2$ and 1% $O_2$ (the lowest), and the control air treatment was the highest . Very low $O_2$ content, conversly, did not show a satisfying result to the product.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.209-212
• /
• 2002

Main radionuclides of the soil waste stored in Korea Atomic Energy Research Institute are Co-60 and Cs-137. Moisture content of soil is 12%, pH of soil is 5.8, and content of organic matter is 2.2 %. Radioactive concentrations of the soil particle size of which is less than 0.063mm and soil in the drum surface of which is more than radiation dose rate 0.05mR/hr are higher. Meanwhile, radioactive concentration of soil in the drum surface of which is less than radiation dose rate 0.02 mR/hr are mostly lower. On using the mixing solution of ammonium sulfate and citric acid, 62% Co was removed from soil and 41% Cs was removed. Also, on using the mixing solution of ammonium nitrate and citric acid, 61% Co was removed from soil and 39% Cs was removed, and on using the mixing solution of ammonium potassium oxalate, 36% Co was removed and only 3% Cs was removed. And on using only water, removal efficiency is less than 5%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2020

The aims of this study were to compare the biomethanation of CO₂ through specific methanogenic activity (SMA) test which was inoculated with four different types of mixed microbial culture obtained from full-scale anaerobic digestion (AD) plants. The experimental results showed that CH₄ conversion was the highest in the samples inoculated by seed sludge taken from ADs of food waste and brewery; under this condition, the produced biomethane contains 89.3-91.9% of CH₄. Meanwhile, the lowest level was obtained in the sample from sewage sludge. The measured ratio of CH₄ production rate to CO₂ consumption rate in all reactors was higher than the theoretical value (1) in the middle of the period and soon dropped to 0.7-0.8. It might be due to changed metabolic pathways in the reactor by the degradation of residual organic matter and the increased activity of homoacetogenic bacteria.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.269-275
• /
• 2013

Thiuram (DPTT, TMTD), thiazole (MBT, MBTS), sulfenamide (CBS, NOBS), and zinc containing thiuram (dithiocarbamate) (ZDBC) type accelerators were added into silica and carbon black filled natural rubber (NR) compounds. Their effects on vulcanization time and rate were compared. The vulcanization rate of thiuram type accelerator added compounds showed the fastest rate, followed by thiazole and sulfenamide types. Silica filled natural rubber (NR) compounds showed a slower vulcanization time ($t_{s2}$, $t_{10}$, $t_{90}$) and lower cure rate index (CRI) than carbon black filled ones upon each accelerator.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.838-846
• /
• 2016

Most of combustion processess used in industries require recovering or removing flue gas components. Recently a new MBA (moving bed adsorption) process for recovering $CO_2$ using zeolite 13X was developed. In this study, adsorption experiments for carbon dioxide, nitrogen, sulfur dioxide, and water vapor on zeolite 13X were carried out. Adsorption equilibrium and adsorption rate into solid particle were investigated. Langmuir, Toth, and Freundlich isotherm parameters were calculated from the experiment data at various temperatures. Experimental results were consistent with the theoretically predicted values. Also $CO_2$ adsorption amount was measured under the conditions with impurities such as $SO_2$ and $H_2O$. Binary adsorption data were well fitted to the extended Langmuir isotherm using parameters obtained from pure component experiment. However, $H_2O$ impurity less than, roughly, ${\sim}10^{-5}H_2O\;mol/g$ zeolite 13X enhanced slightly $CO_2$ adsorption. Spherical particle diffusion model well described experimentally measured adsorption rate. Diffusion coefficients and activation energies of $CO_2$, $SO_2$, $N_2$, $H_2O$ were obtained. Diffusion coefficients of $CO_2$ and $SO_2$ decreased with small amount of preadsorbed impurity. Parameter values from this study will be helpful to design of real commercial adsorption process.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.205-209
• /
• 2015

CCU (Carbon Capture & Utilization) has a potential technology for the reduction and usage of carbon dioxide which is greenhouse gas emitting from a fossil fuel buring. To decompose the carbon dioxide, a three phase gliding arc plasma-catalytic reactor was designed and manufactured. Experiments of carbon dioxide reduction was performed by varying the gas flow rate with feeding the $CO_2$ only as well as the input power, the catalyst type and steam supply with respect to the injection of the mixture of $CO_2$ and $CH_4$. The $CO_2$ decomposition rate was 7.9% and the energy efficiency was $0.0013L/min{\cdot}W$ at a $CO_2$ flow rate of 12 L/min only. Carbon monoxide and oxygen was generated in accordance with the destruction of carbon dioxide. When the injection ratio of $CH_4/CO_2$ reached 1.29, the $CO_2$ destruction and $CH_4$ conversion rates were 37.8% and 56.6% respectively at a power supply of 0.76 kW. During the installation of $NiO/Al_2O_3$ catalyst bed, the $CO_2$ destruction and $CH_4$ conversion rates were 11.5% and 9.9% respectively. The steam supply parameter do not have any significant effects on the carbon dioxide decomposition.

• Biomedical Science Letters
• /
• v.27 no.2
• /
• pp.45-50
• /
• 2021

Coagulase-negative staphylococci (CoNS) are a typical group of microorganisms, and the recent advances in laboratory technology and medicine has dramatically modified their significance in medical practice. CoNS, which were previously classified as normal bacterial flora, have recently been reported to be associated with serious infectious diseases, such as surgical wound infection or periprosthetic joint infection. Representative CoNS include Staphylococcus epidermidis, S. haemolyticus, and S. saprophyticus, which are known to cause serious problems in biomaterial-based and prosthetic device infections, as well as to cause simple urinary tract infections in sexually active women. Over the last decade, the clinical isolation rate of CoNS has been increasing, and antibiotic resistance has also been occurring. This review aimed to investigate the incidence of CoNS infection and to use the results as basic data for the management of CoNS, with a focus on the isolation rate and antibiotic resistance in clinical surgery.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.71-78
• /
• 2016

The present study was performed to examine the high temperature adaptability with CO₂ treatment for tomato under the condition of greenhouse cultivation during summer season. The plants with the CO₂ concentration of 1000 ppm recorded higher scores in Fm/Fo and Fv/Fm but lower score in Fo than others through the measurement of chlorophyll fluorescence, which implicated that the plants with the CO₂ concentration of 1000 ppm had more adaptability to high temperature than the others. At the condition of the same air temperature as 30℃ and 40℃, the photosynthetic rate was increased with the increase of CO₂ concentration. When in the high air temperature state of 40℃, although the photosynthic rate was low in comparison with 30℃, its value was about 18.5umolm^-2s^-1 in case of 1000ppm. The higher concentration of CO₂ made the more activated anti-oxidation enzyme (superoxide dismutase and peroxidase) for the both cultivars as 'momotaro' and 'minichal'. The cultivar of 'minichal' performed the high temperature limit as 41℃ at the CO₂ condition of 500 ppm and 43℃ at the CO₂ condition of 1000 ppm through the estimation on the variation of chlorophyll fluorescence Fo by CO₂ concentrations.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.87-94
• /
• 2011

This study was suggested to develop sustainable durability design system and proposed the plan to evaluate design conditions that meet the intended service life and $LCCO_{2}$ reduction level of reinforced concrete structure easily from the early design stage. For that the W/B and covering depth of the concrete structure were calculated through calculation of service life based on standard specification expression and the quantitative reduction rate of the vertical member of reinforced concrete structure by the calculated W/B was applied. Life cycle of building classified into construction stage, operation stage, maintenance stage, and demolition/disposal stage and the method of $CO_{2}$ evaluation of each stage was proposed. For construction stage, the major construction materials that take up over 80% $CO_{2}$ emitting during building construction were selected and the $CO_{2}$ evaluation method for 5 standard apartment houses was proposed. Also, for operation stage, $CO_{2}$ emission was calculated through calculation of heating load by energy efficiency rating certification system. For maintenance stage, $CO_{2}$ emission was calculated using concept of re-construction by life and for demolition/disposal stage was calculated with the use of construction standard estimate. As a result of the case study by such evaluation methods, 80 years of service life and 17 specifications of sustainable durability design that meet the 40% intended $LCCO_{2}$ reduction level were deduced. The Maximum $LCCO_{2}$ reduction rate was analyzed by 47.2%.