• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.86-92
• /
• 2002

This study was performed to assets the operating characteristics of food waste composting and co-composting (food waste + sewage sludge) at a compelling facility. The facility was being operated successfully without being affected by kind of composting feed materials. Partial anaerobic condition was detected during food waste composting and co-com-posting, but these two composting systems were proven to be operated successfully under aerobic condition from the monitoring results of $O_2$, volatile solids reduction rate, temperature, and other parameters. The conductivity and chloride concentrations of compost were gradually increased during two composting periods, but the conductivity and chloride concentrations of co-compelling indicated lower values than those of food waste composting at final point(40 m). As a result, co-composting was turned out to be more desirable than food waste composting, considering salt problem. High correlations ($R^2$= 0.9265 for food waste composting and $R^2$= 0.9685 for co-composting) between CEC and volatile organic matter were found. Quality of composts produced from two composting process satisfied Korean heavy metal standard.

• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.163-168
• /
• 2024

As the demand for lithium-ion batteries for electric vehicles is increasing, it is important to recover valuable metals from waste lithium-ion batteries. In this study, the effects of gas flow rate and hydrogen partial pressure on hydrogen reduction of NCM-based lithium-ion battery cathode materials were investigated. As the gas flow rate and hydrogen partial pressure increased, the weight loss rate increased significantly from the beginning of the reaction due to the reduction of NiO and CoO by hydrogen. At 700 ℃ and hydrogen partial pressure above 0.5 atm, Ni and Li₂O were produced by hydrogen reduction. From the reduction product and Li recovery rate, the hydrogen reduction of NCM-based cathode materials was significantly affected by hydrogen partial pressure. The Li compounds recovered from the solution after water leaching of the reduction products were LiOH, LiOH·H₂O, and Li₂CO₃, with about 0.02 wt% Al as an impurity.

• Korean Journal of Veterinary Service
• /
• v.46 no.4
• /
• pp.315-324
• /
• 2023

This study was carried out to investigate the genotypic diversity of PCV2 and co-infection of PCV3 in the hilar lymph nodes of 700 randomly-selected slaughter pigs. Fourteen samples per each farm were obtained from 50 farms between February and August in 2022. Of the 50 farms, 44 farms that had been positive for PCV2 by RT-PCR were genotyped. As a result of PCV2 genotyping, positive rate of PCV2 DNA was 62.3% (436/700). Among the PCV2 DNA-positive samples, positive rate of a single PCV2 genotype was 79.1% (345/436), while multiple PCV2 genotypes were only detected in 20.9% (91/436). Of the 436 single infection cases, PCV2d genotype was most prevalent. Positive rates of PCV2 and PCV3 were 53.6% and 26.0% at the sample level, 5.1% and 8.0% at the farm level, respectively. And the co-positive rate of two viruses was 8.7% (61/700) at the sample level, 62.0% (31/50) at the farm level. These results demonstrate that PCV2 prevalence in slaughter pigs is very high and co-infection between different PCV2 genotypes and between PCV2 and PCV3 is relatively common. Therefore, genetic diversity and co-infection between other porcine circoviruses should be consistently monitored in the future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.225-231
• /
• 2021

The reaction between Li₂CO₃ and Cl₂ was investigated to verify its occurrence during a carbon-anode-based oxide reduction (OR) process. The reaction temperature was identified as a key factor that determines the reaction rate and maximum conversion ratio. It was found that the reaction should be conducted at or above 500℃ to convert more than 90% of the Li₂CO₃ to LiCl. Experiments conducted at various total flow rate (Q) / initial sample weight (W_i) ratios revealed that the reaction rate was controlled by the Cl₂ mass transfer under the experimental conditions adopted in this work. A linear increase in the progress of reaction with an increase in Cl₂ partial pressure (pCl₂) was observed in the pCl₂ region of 2.03-10.1 kPa for a constant Q of 100 mL·min^-1 and W_i of 1.00 g. The results of this study indicate that the reaction between Li₂CO₃ and Cl₂ is fast at 650℃ and the reaction is feasible during the OR process.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.580-585
• /
• 2004

Respiration of 'Fuyu' persimmon (Diospyros kaki) fruits were measured in terms of oxygen consumption rate and carbon dioxide evolution by closed system experiments at 0, 5, and $20^{\circ}C$. Enzyme kinetics-based respiration model was used to describe respiration rate as function of $O_2\;and\;CO_2$ gas concentrations $(R=V_m[O_2]/K_m+(1+[CO_2]/K_i)[O_2])$, and Arrhenius equation was applied to analyze temperature effect. $V_m\;and\;K_m$ increased, while $K_i$ decreased, with increasing temperature. $K_m\;of\;O_2$ consumption was greater than that of $CO_2$ evolution at equal temperature. Inhibitory effect of reduced $O_2$ level on $O_2$ consumption was more prominent than that on $CO_2$ evolution. Activation energy of respiration decreased with reduced $O_2$ and elevated $CO_2$ concentrations. Activation energy of $CO_2$ evolution was greater than that of $O_2$ consumption. Permeable package experiments verified respiration model parameters by showing good agreement between predicted and experimental gas concentrations in package.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.46-51
• /
• 2006

As one of the $CO_2$ reduction strategies, a biological method was proposed to convert $CO_2$ to useful biomass with antioxidant carotenoids by photosynthetic microorganisms. One of the photoautotrophs, Haematococcus pluvialis is a freshwater green microalga and accumulates the secondary carotenoid astaxanthin during induction of green vegetative cells to red cyst cells. In this study, $CO_2$ fixation and astaxanthin production using H. pluvialis was conducted by photoautotrophic culture in the $CO_2$ supplemented photo-incubator. Maximum growth rate of H. pluvialis was obtained at a 5％ $CO_2$ environment on basic N and P conditions of NIES-C medium. The photoautotrophic induction consisted of 5％ $CO_2$ supply and high light illumination promoted astaxanthin synthesis in H. pluvialis, yielding an astaxanthin productivity of $9.6mg/L{\cdot}day$ and a $CO_2$ conversion rate of $27.8mg/L{\cdot}day$ to astaxanthin. From the results the sequential photoautotrophic culture and induction process using H. pluvialis is expecting an alternative $CO_2$ reduction technology with a function of valuable biosubstance production.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.157-160
• /
• 2008

The generation of high-purity hydrogen from hydrocarbon fuels is essential for efficient operation of fuel cell. In general, most feasible strategies to generate hydrogen from hydrocarbon fuels consist of a reforming step to generate a mixture of $H_2$, CO, $CO_2$ and $H_2O$ (steam) followed by water gas shift (WGS) and CO clean-up steps. The WGS reaction that shifts CO to $CO_2$ and simultaneously produces another mole of $H_2$ was carried out in a two-stage catalytic conversion process involving a high temperature shift (HTS) and a low temperature shift (LTS). In a typical operation, gas emerges from the reformer is taken through a high temperature shift catalyst to reduce the CO concentration to about 3~5%. The HTS reactor was designed and tested in this study to produce hydrogen-rich gas with CO to a range of 2~4%. The iron based catalysts (G-3C) was used for the HTS to convert the most of CO in the effluent from the partial oxidation (POX) to $H_2$ and $CO_2$ at a relatively high rate. Parametric screening studies were carried out for variations of the following variables: reaction temperature, steam flow rate, components ratio ($H_2/CO$), and reforming gas flow rate.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.8-13
• /
• 2015

The experimental design methodology was applied in the drop tube furnace (DTF) to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of DTF. The dependent variables such as burnout ratios (BOR) of coal and $CO/CO_2$ ratios were mathematically described as a function of three independent variables (coal particle size, carrier gas flow rate, wall temperature) being modeled by the use of the central composite design (CCD), and evaluated using a second-order polynomial multiple regression model. The prediction of BOR showed a high coefficient of determination (R2) value, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the simulation data. However, $CO/CO_2$ ratio had a big difference between calculated values and predicted values using conventional RSM, which might be mainly due to the dependent variable increses or decrease very steeply, and hence the second order polynomial cannot follow the rates. To relax the increasing rate of dependent variable, $CO/CO_2$ ratio was taken as common logarithms and worked again with RSM. The application of logarithms in the transformation of dependent variables showed that the accuracy was highly enhanced and predicted the simulation data well.

• The Korean Journal of Ecology
• /
• v.23 no.6
• /
• pp.423-429
• /
• 2000

To understand the effects of elevated $CO_2$ concentration and temperature on seedling emergence of seven herbaceous species, the seedling emergence was monitored between November 1997 and May 1998 using a temperature gradient chamber and a $CO_2$-temperature gradient chamber. Experiment was conducted under current ambient condition (Control plot), 2$^{\circ}C$-warmed condition with ambient $CO_2$ (T2 Plot), 4$^{\circ}C$-warmed condition with ambient $CO_2$ (T4 plot). and 4$^{\circ}C$-warmed condition with 1.8 fold of ambient $CO_2$ (CT4 plot). Species tested in this study were Digitaria adscendens, Echinochloa crus-galli, Panicum bisulcatum, Setaria viridis. Oenothera biennis, Andropogon virginicus, and Imperata cylindrica. Each species often dominates in the herbaceous stage of secondary succession in Japan. The mean seedling emergence times for all species were significantly increased to 23.6 and 32.2 d in the T2 and T4 plot compared to the Control plot, respectively. The most sensitive and insensitive species in seedling emergence time in T2 plot were O. biennis and D. adscendens, respectivel.y, and those in the T4 and CT4 plot were I. cylindrica and D. adscendens, E. crus-galli and A. virginicus, respectively. All experimental species showed no significant difference in the seedling emergence rate between treatments except for O. biennis and I. cylindrica. O. biennis showed a great decrease in the seedling emergence rate from 83.3% in the Control plot to 38.0%, 14.7%, and 29.3% in the T2, T4, and CT4 plot, respectively. Elevated $CO_2$ had very little effect on the seedling emergence. From these observations, it is expected that increased temperature would greatly advance the vegetative recovery time after disturbance through the advancement of seedling emergence time.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.35-48
• /
• 2016

A micromodel was applied to estimate the effects of geological conditions and injection methods on displacement of resident porewater by injecting scCO₂ in the pore scale. Binary images from image analysis were used to distinguish scCO₂-filled-pores from other pore structure. CO₂ flooding followed by porewater displacement, fingering migration, preferential flow and bypassing were observed during scCO₂ injection experiments. Effects of pressure, temperature, salinity, flow rate, and injection methods on storage efficiency in micromodels were represented and examined in terms of areal displacement efficiency. The measurements revealed that the areal displacement efficiency at equilibrium decreases as the salinity increases, whereas it increases as the pressure and temperature increases. It may result from that the overburden pressure and porewater salinity can affect the CO₂ solubility in water and the hydrophilicity of silica surfaces, while the neighboring temperature has a significant effect on viscosity of scCO₂. Increased flow rate could create more preferential flow paths and decrease the areal displacement efficiency. Compared to the continuous injection of scCO₂, the pulse-type injection reduced the probability for occurrence of fingering, subsequently preferential flow paths, and recorded higher areal displacement efficiency. More detailed explanation may need further studies based on closer experimental observations.