• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.869-873
• /
• 2014

Cardiorespiratory variables were measured in flounder Paralicthys olivaceus exposed to acidified seawater equilibrated with a gas mixture containing 5% $CO_2$ gas for 72 h at $20^{\circ}C$. It was found that $CO_2$ produced a significant increase in arterial $PCO_2$ ($PaCO_2$) and significant decreases in arterial pH (pHa). $CO_2$ transiently increased heart rate within 30 min of exposure. After cardiac output was elevated by the increase in heart rate within 30 min, was then reduced by the decrease in both stroke volume and heart rate. The heart responses of flounder differ from those of yellowtail to high $CO_2$ environment.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.99-104
• /
• 2011

BACKGROUND: Application of urea may increase $CO_2$ emission from soils due both to $CO_2$ generation from urea hydrolysis and fertilizer-induced decomposition of soil organic carbon (SOC). The objective of this study was to investigate the effects of increasing urea application on $CO_2$ emission from soil and mineralization kinetics of indigenous SOC. METHODS AND RESULTS: Emission of $CO_2$ from a soil amended with four different rates (0, 175, 350, and 700 mg N/kg soil) of urea was investigated in a laboratory incubation experiment for 110 days. Cumulative $CO_2$ emission ($C_{cum}$) was linearly increased with urea application rate due primarily to the contribution of urea-C through hydrolysis to total $CO_2$ emission. First-order kinetics parameters ($C_0$, mineralizable SOC pool size; k, mineralization rate) became greater with increasing urea application rate; $C_0$ increased from 665.1 to 780.3 mg C/kg and k from 0.024 to 0.069 $day^{-1}$, determinately showing fertilizer-induced SOC mineralization. The relationship of $C_0$ (non-linear) and k (linear) with urea-N application rate revealed different responses of $C_0$ and k to increasing rate of fertilizer N. CONCLUSION(s): The relationship of mineralizable SOC pool size and mineralization rate with urea-N application rate suggested that increasing N fertilization may accelerate decomposition of readily decomposable SOC; however, it may not always stimulate decomposition of non-readily decomposable SOC that is protected from microbial decomposition.

• Journal of Welding and Joining
• /
• v.15 no.2
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.89-94
• /
• 1998

A field experiment was carried out to determine the effects of chemical drying agents at mowing on the field drying rate of alfalfa (cv. Vernal) and rye (cv. Koolgrazer) for hastening hay manuf8cture. In alfalfa; chemicals ($K_2CO_3$ 2% $K_2CO_3$ 3% $Na_2CO_3$ 2% $CaCO_3$, 2% $K_2CO_3$2% + $Na_2CO_3$, 1% only water spray and control) were treated at early bloom stage in 1995. Chemicals ($K_2CO_3$, 2%, $Na_2CO_3$, 2% $CaCO_3$, 2% and control) were applicated at different harvest stages (early heading, heading and bloom) in rye, 1996. The drying rate of alfalfa by $K_2CO_3$ treatment among chemicals was higher than control, and the duration of field dry was shortened by one day with $K_2CO_3$ application, but there was no difference in drying efficiency between $K_2CO_3$ 2% and $K_2CO_3$ 3%. In rye, however, no moisture reduction by chemicals was observed. The days required for field dry were 6, 4, and 3 days at warly heading heading and bloom stage respectively; regardless of chemical drying agents and conbol. The nutritive value of rye hay with chemicals at baling was very slightly higher than control, but there was no significant difference. Also, no difference of hay quality was found among drying agents. In conclusion, $K_2CO_3$can enhance the field drying rate of alfalfa hay, but the drying efficiency was not high, particularly in rye hay. Harvesting at early heading to heading stage was desirable for manufacture of high quality rye hay.

• Korean Journal of Ecology and Environment
• /
• v.54 no.2
• /
• pp.120-124
• /
• 2021

In order to understand the vegetative role of Glycine soja, we studied the basic physiological characteristics between Glycine soja and Glycine max. For this study, the light intensity (μmol m^-2 s^-1) on leaf surface, leaf temperature (℃), transpiration rate (mmol m^-2 s^-1), photosynthetic rate (μmol m^-2 s^-1), substomatal CO₂ partial pressure (vpm) of Glycine soja and Glycine max were measured, and the quantum yield, photosynthesis rate per substomatal CO₂ partial pressure were calculated. In the results of simple regression analysis, the increasing quantum yield decreases leaf temperature both of Glycine soja and Glycine max and the increasing leaf temperature decreases transpiration rate in case of Glycine soja. However, in case of Glycine max, the increasing leaf temperature decreases substomatal CO₂ partial pressure, photosynthetic rate, and photosynthetic rate per substomatal CO₂ partial pressure as well as transpiration rate. Also, increasing transpiration rate increases substomatal CO₂ partial pressure while decreases photosynthetic rate per substomatal CO₂ partial pressure. Thus, Glycine soja is relatively more easily adaptable to severe environments with low soil nutrients and high light levels. Compared to Glycine max susceptible to water loss due to a water-poor terrestrial habitat, the physiological traits of Glycine soja has a high average transpiration rate and are less susceptible to water loss will act as a factor that limits the habitat according to soil moisture.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.705-711
• /
• 2015

This study was conducted to maintain the postharvest shelf-life of summer strawberry cultivars 'Goha' and 'Flamengo' through $CO_2$ (90%) and $ClO_2$ gas ($5{\mu}L{\cdot}L^{-1}$) pre-treatment. The respiration rate of 'Goha' and 'Flamengo' treated with $CO_2$ and $CO_2$ + $ClO_2$ was the lowest during storage. The weight loss with $CO_2$ + $ClO_2$ treatment was about 1% lower than the control group and 'Goha' was the lowest during storage. The pre-treatments effect on soluble solids contents was minimized. The firmness with $CO_2$ and $CO_2$ + $ClO_2$ treatments was only about 30% higher than $ClO_2$ and control. The firmness of 'Goha' was about 2.15N and 'Flamengo' was 2.37N, 15 days after storage. Decayed fruit was shown from after 6 days after storage in control. Control group lost quality 10 days after storage due to decayed fruit rate 20% of 'Goha' and 'Flamengo'. $CO_2$ and $CO_2$ + $ClO_2$ treatments showed the lowest decay rate during storage. Especially, 'Goha' showed around 5% decay fruit rate 10 days after storage. As a result, $CO_2$ + $ClO_2$ pre-treatment is recommended to extend the shelf-life of the summer strawberries.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.737-746
• /
• 2008

Numerical study is conducted to grasp preferential diffusion effects on flame characteristics in $H_2/CO$ syn-gas diffusion flames diluted with $CO_2$. The models of Sun et al. and David et al., which have been well known to be best-fitted for $H_2/CO$ synthetic mixture flames. are evaluated for $H_2/CO$ synthetic mixture flames diluted with $CO_2$. Comparison of flame structures with mixture-averaged species diffusion and suppression of the diffusivities of $H_2$ and H was made. The behaviors of maximum flame temperatures with those species diffusion models are not explained by scalar dissipation rate but by the nature of chemical kinetics. Importantly-contributing reaction steps to heat release rate are also compared for the three species diffusion models in $H_2/CO/CO_2$ flames with and without $CO_2$ dilution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3383-3388
• /
• 2014

An experimental study was performed to compare the characteristics of the combustion pressure and exhaust emissions in the case of using pure diesel when the EGR rate was changed in a CRDI 4-cylinder diesel engine with those using biodiesel blended and pure diesel fuel. In this study, the EGR rate variation were conducted at an engine speed of 2000rpm with fuel with a biodiesel blended rate of 20%. The combustion pressure of the biodiesel blended rate 20% and pure diesel fuels decreased with increasing EGR rate. The IMEP of biodiesel was higher than that of ULSD (Ultra low sulfur diesel). The emission results showed that the NOx emission of biodiesel blended fuel with increasing EGR rate was higher than that of ULSD. In addition, the NOx emission of biodiesel blended and diesel fuel decreased with increasing EGR rate. The CO and soot, $CO_2$ emissions increased with increasing EGR rate, and the CO and soot emissions from the biodiesel blended fuel were lower than that of ULSD but the $CO_2$ emissions were higher.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.1-8
• /
• 2019

Objectives: The purpose of this study was to estimate the ventilation rate of residential homes in Korea through tracer gas methods using indoor and outdoor concentrations of carbon dioxide ($CO_2$) and $CO_2$ generation rates from breathing. Methods: In this study, we calculated the number of occupants in a home by time through data on the average number of people per household from the Korean National Statistical Office and also measured the amount of $CO_2$ generation by breathing to estimate the indoor $CO_2$ generation rate. To estimate the ventilation rate, several factors such as the $CO_2$ generation rate and average volume of residential house provided by the Korean National Statistical Office, indoor $CO_2$ concentrations measured by sensors, and outdoor $CO_2$ concentrations provided by the Korea Meteorological Administration, were applied to a mass balance model for residential indoor environments. Results: The average number of people were 2.53 per household and Koreans spend 61.0% of their day at home. The $CO_2$ generation rate from breathing was $13.9{\pm}5.3L/h$ during sleep and $15.1{\pm}5.7L/h$ in a sedentary state. Indoor and outdoor $CO_2$ concentrations were 849 ppm and 407 ppm, respectively. The ventilation rate in Korean residential houses calculated by the mass balance model were $42.1m^3/h$ and 0.71 air change per hour. Conclusions: The estimated ventilation rate tended to increase with an increase in the number of occupants. Since sensor devices were used to collect data, sustainable data could be collected to estimate the ventilation rate of Korean residential homes, which enables further studies such as on changes in the ventilation rate by season resulting from the activities of occupants. The results of this study could be used as a basis for exposure and risk assessment modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.602-606
• /
• 2009

The absorption capacity and initial absorption rate in 5 %, 10%, 15 % and 20% $Na_{2}CO_{3}$ under the constant temperature at $40^{\circ}C$ and the initial absorption rate in mixture of different alkaline salts such as $KHCO_3$, $CaCO_3$ and $K_{2}CO_{3}$ were measured using batch type stirred cell contractor. 10% $Na_{2}CO_{3}$ showed the highest absorption capacity and $Na_{2}CO_{3}$ and $K_{2}CO_{3}$ showed the somewhat increased absorption capacity and initial absorption rate respectively. Further more, we have studied the effect of adding Pz and Pp to $Na_{2}CO_{3}$. The result showed that absorption rate of $CO_2$ was increased by adding these additives.