• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.9-15
• /
• 2009

본 연구는 축소실험을 통하여 터널내 화재발생시 구난역 내 설계된 환기 시스템 성능을 검증 하였다. Froude 수 상사법칙을 적용하여 실제 터널 크기의 1/35로 축소된 모형터널을 사용하였다. 모형터널은 두께가 2mm인 철을 사용하여 총 길이 10m, 높이 0.19m, 폭 0.26m으로 제작되었다. Cross-passage는 사고터널과 구난 터널 사이에 연결되고 Cross-passage 중앙에는 방화문이 설치되어 있다. 실험에는 n-heptane, $4cm{\times}4cm$ 풀화재를 이용하였다. 화원의 발열량은 695.97W이고, 화원 위치는 터널 중앙과 가장 위험한 경우로써 터널 입구지점에 각각 설치하였다. 환기조건은 0.015cms이고 화원과 가장 인접한 곳에서만 배기하도록 하였다. 구난역 배기 성능을 검증하기 위해 온도와 CO농도를 측정하여 연기의 유무를 파악하였다. 본 실험의 결과는 다음과 같다. 첫째, 터널 중앙화원인 경우 환기가 없어도 구난 터널에 연기가 검출되지 않았다. 둘째, 구난역 입구 부근에 화원을 설치한 경우 환기 조건을 주지 않으면 연기가 구난 터널로 침투하지만, 설계된 배기 조건시 연기는 구난터널로 전파하지 않았다.

• 한국환경보건학회지
• /
• 제32권4호
• /
• pp.304-315
• /
• 2006

This study is performed to reexamine the association between ambient air pollution and daily mortality in seven major cities of Korea using a method of meta-analysis with the data filed for the period 1998-2001. These cities account for half of the Korean population (about 23 million). The observed concentrations of carbon monoxide (CO, mean=1.08 ppm), ozone ($O_3$, mean=33.97 ppb), particulate matter less than 10 ${\mu}m$ ($PM_{10},\;mean=57.11\;{\mu}g/m^3$), nitrogen dioxide ($NO_2$, mean=25.09 ppb), and sulfur dioxide ($SO_2$, mean=9.14 ppb) during the study period were at levels below Korea's current ambient air quality standards. Generalized additive models were applied to allow for the highly flexible fitting of seasonal and long-term time trends in air pollution as well as nonlinear associations with weather variables, such as air temperature and relative humidity. Also, we calculated a weighted mean as a meta-analysis summary of the estimates and its standard error. In city-specific analyses, an increase of $41.17{\mu}g/m^3(IQR)\;of\;PM_{10}$ corresponded to $1{\sim}12%$ more deaths, given constant weather conditions. Like most of air pollution epidemiologic studies, this meta-analysis cannot avoid fleeing from measurement misclassification since no personal measurement was taken. However, we can expect that a measurement bias be reduced in district-specific estimate since a monitoring station is better representative of air quality of the matched district. Significant heterogeneity was found for the effect of all pollutants. The estimated relative risks from meta-like analysis increased compared to those relative risks from pooled analysis. The similar results to those from the previous studies indicated existence of health effect of air pollution at current levels in many industrialized countries, including Korea.

• 한국환경보건학회지
• /
• 제8권1호
• /
• pp.67-80
• /
• 1982

In order to evaluate the psychosomatic health status of metal manufacturing industries workers and their working environments, the present study was conducted from March 1, 1981 to the end of September 1981. The data was obtained from the samples of metal manufacturing industries in Kyung-In Area and their 1, 162 employees. In addition, the 803 urban residents including students, office clerks, and general publics were sampled as control groups to compare with factory employees in psychosomatic analysis. The basic tool employed in the present study was the Todai Health Index (THI) which modified CMI and was developed by Tokyo University Research Team of Japan. The results of the present study were summarized as follows: 1. Working environments of the factories 1) The data shows that fabrication shop produced the highest noise level ranging from 91 to 96 dB (A) and iron and steel shop had the lowest noise level ranging from 81 to 86 dB (A). 2) Dust concentration was the highest in iron foundry shop ($3.8 mg/m^3$) and the lowest in fabrication shop ($1.2 mg/m^3$). 3) WBGT above threshold limit values (T.L.V.) was noted in steel shop (38$\circ$C) and iron foundry shop (34$\circ$C) 4) The concentration of Sulfur dioxide ($SO_2$)was 30.5ppm at steel shop and 12.0ppm at iron foundry shop. 5) The concentration of carbon monoxide (CO) was 140.0ppm at steel shop and 110.5ppm at iron foundry shop. 6) The atmospheric lead concentration was $0.49 mg/m^3$ at soldering shop. 2. The responses of psychosomatic complaints were much higher in steel shops group than in other manu-facturing group, except the response of aggressiveness. 3. The responses of psychosomatic complaints were much higher in industrial workers than in urban residents, except the responses of depression and aggressiveness (p < 0.01 ). 4. The psychosomatic symptoms which industrial workers and urban residents complained frequently were nervousness. agressiveness and lie scale in order. 5. The responses of psychosomatic complaints by sex were much higher in female group than in male group, except the response of aggressiveness. 6. The responses of psychosomatic complaints by age were that both the female and male group showed an increasing tendency in the all items, except the response of depression as age was increasing. 7. The responses of psychosomatic complaints by the length of services were that both the female and male group showed a tendency of increasing in physical symptoms as work years increased. 8. The responses of psychosomatic complaints were higher in unmarried group in the score of nervousness, aggressiveness, mental irritability and irregular life.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.439-444
• /
• 1993

The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.

• 한국건축시공학회지
• /
• 제19권4호
• /
• pp.289-297
• /
• 2019

현재 건축물에 사용되는 접착제는 주로 유기질 재료인 에폭시 수지 접착제가 사용되고 있다. 유기질 재료인 에폭시 수지 접착제는 유기성 물질로 접착제 생산 시 유해물질이 발생하며, 시공 후에도 유해물질이 실내거주공간에서 높게 나타난다. 또한 건축물 화재 시 유기 재료에서 발생되는 다량의 일산화탄소가 인명피해로 이어진다. 본 연구는 순수무기계 재료인 산화마그네시아, 인산염, 붕사를 사용한 무기 접착재에 대해 기존 유기 접착제를 대체 할 무기 접착재로의 활용가능성을 평가한 연구이다. 적정 인산염 선정에 관한 실험과 지연제로서 활용한 붕사의 첨가율에 대한 특성을 실험한 결과 적정 인산염으로 제1인산칼륨이 도출되었으며, 붕사 첨가율에 따른 특성을 측정한 결과 KS F 4923의 품질기준과 비교하여 경화수축률과 가열변화율은 품질기준을 만족하였으며, 인장강도는 붕사 첨가율 4% 이상에서 만족하는 결과가 나왔지만 접착강도의 경우 품질 기준을 충족하지 못하였다. 향후 접착강도 증진을 위한 추가적인 연구가 필요할 것으로 판단된다.

• 한국건설안전학회 논문집
• /
• 제3권1호
• /
• pp.1-8
• /
• 2020

농어촌 민박 이용객의 증가와 정부의 관련 정책에 대한 다양한 지원이 이루어지고 있다. 그러나 농어촌 민박의 숙박 서비스에 대한 안전기준이나 안전지표가 부족하여 2018년 12월 강릉 펜션 일산화탄소 누출사고, 2020년 1월 동해 펜션 가스폭발사고 등 대형사고가 발생하고 있으며 국민의 안전을 위협하고 있다. 숙박업소와 달리 농어촌 민박의 경우 소화기와 화재경보기 등의 일정 요건을 갖추면 영업이 가능하도록 되어있다. 농림축산식품부는 농어촌 민박 제도개선 대책으로 농어촌정비법 개정을 통해 가스와 전기안전 전문가가 안전점검을 하고 그 확인서를 제출하는 제도를 도입하고 있다. 본 연구의 목적은 농어촌 민박의 숙박시설에 대한 안전기준과 안전지표를 제시하여 농어촌 민박과 관련한 지방자치단체와 정부의 운영관리와 점검에 필요한 기준을 제시하는 데 있다. 숙박시설의 안전관리는 국민의 가장 기본적인 안전과 직결된다. 따라서 농어촌 민박에 대한 적절한 안전기준을 제시하고 신고필증을 배부할 필요가 있으며 지속적인 수시점검과 안전교육 및 소방, 질식사고 등에 대한 사전예방을 위한 대책을 세울 필요가 있다. 본 연구를 통해 농어촌 민박의 안전관리 실태에 대한 조사와 분석 결과를 바탕으로 안전관리 기준 및 안전지표, 수시점검 방법, 사고예방 교육을 제공하고 제도화 할 필요성이 있는 것으로 나타났다. 농어촌 민박의 숙박이용 국민에 대한 안전확보를 위해 반드시 안전관리 기준과 교육을 제도화하는 것이 시급한 것으로 보인다.

• Korean Journal of Radiology
• /
• 제22권10호
• /
• pp.1719-1729
• /
• 2021

Objective: Emphysema and small-airway disease are the two major components of chronic obstructive pulmonary disease (COPD). We propose a novel method of quantitative computed tomography (CT) emphysema air-trapping composite (EAtC) mapping to assess each COPD component. We analyzed the potential use of this method for assessing lung function in patients with COPD. Materials and Methods: A total of 584 patients with COPD underwent inspiration and expiration CTs. Using pairwise analysis of inspiration and expiration CTs with non-rigid registration, EAtC mapping classified lung parenchyma into three areas: Normal, functional air trapping (fAT), and emphysema (Emph). We defined fAT as the area with a density change of less than 60 Hounsfield units (HU) between inspiration and expiration CTs among areas with a density less than -856 HU on inspiration CT. The volume fraction of each area was compared with clinical parameters and pulmonary function tests (PFTs). The results were compared with those of parametric response mapping (PRM) analysis. Results: The relative volumes of the EAtC classes differed according to the Global Initiative for Chronic Obstructive Lung Disease stages (p < 0.001). Each class showed moderate correlations with forced expiratory volume in 1 second (FEV₁) and FEV₁/forced vital capacity (FVC) (r = -0.659-0.674, p < 0.001). Both fAT and Emph were significant predictors of FEV₁ and FEV₁/FVC (R² = 0.352 and 0.488, respectively; p < 0.001). fAT was a significant predictor of mean forced expiratory flow between 25% and 75% and residual volume/total vital capacity (R² = 0.264 and 0.233, respectively; p < 0.001), while Emph and age were significant predictors of carbon monoxide diffusing capacity (R² = 0.303; p < 0.001). fAT showed better correlations with PFTs than with small-airway disease on PRM. Conclusion: The proposed quantitative CT EAtC mapping provides comprehensive lung functional information on each disease component of COPD, which may serve as an imaging biomarker of lung function.

• 한국산업정보학회논문지
• /
• 제24권5호
• /
• pp.9-16
• /
• 2019

오늘날 세계 에너지 시장에서는 친환경 에너지의 중요성이 대두되고 있다. 수소 에너지는 미래의 청정에너지원이며 무공해 에너지원 중 하나이다. 특히 수소를 이용한 연료전지 방식은 재생에너지의 유연성을 높여주고 장기간 에너지 저장 및 변환이 가능해서 화석 자원의 사용에 따른 환경문제와 자원의 고갈로 인한 에너지 문제를 동시에 해결할 수 있는 방안으로 판단된다. 본 연구의 목적은 플라즈마를 이용하여 효율적으로 수소를 생산하는 방안으로, 온도에 따른 개질반응과 수율을 확인하여 DME(Di Methyl Ether)개질의 최적화 방안을 연구하는데 있다. 연구 방법은 2.45 GHz의 전자파플라즈마 토치를 사용하여 청정 연료인 DME를 개질하여 수소를 생산하고, 저온 조건($T3=1100^{\circ}C$), 저온 과산소 조건($T3=1100^{\circ}C$), 고온 조건($T3=1376^{\circ}C$)에서 가스화 분석을 진행하였다. 저온 가스화 분석을 통해 $1100^{\circ}C$ 근처에서는 불안정한 개질 반응으로 인해 메탄이 발생하는 현상을 확인하였고, 저온 과산소 가스화 분석은 저온 가스화 분석과 비교하였을 때 수소는 적으나 이산화탄소는 많은 것을 확인할 수 있었다. 고온에서의 가스화 분석을 통해 $1200^{\circ}C$ 이상에서는 메탄이 발생하지 않았고 약 $1150^{\circ}C$ 부터 메탄이 발생하는 것을 알 수 있었다. 결론적으로 개질반응시 온도가 높을수록 수소의 비율이 높아지나 CO 비율은 증가하는 것을 볼 수 있었다. 그러나, 가스화기의 구조적인 문제로 인해 열손실과 개질의 문제가 발생함을 확인하였다. 향후 연구의 발전 방향으로는, 가스화기 개선을 통해 불완전한 연소를 줄여 높은 수율의 수소를 얻고 일산화탄소, 메탄과 같은 기체의 발생을 낮출 필요성이 있는 것으로 판단된다. 본 연구에서 제안하는 DME를 수증기 플라즈마 개질하여 수소를 생산하는 최적화 방안이, 향후 친환경, 신재생 에너지를 생산하는데 의미있는 기여를 할 수 있을 것으로 기대한다.

• 보존과학연구
• /
• 통권25호
• /
• pp.119-132
• /
• 2004

Annals of the Joseon Dynasty is the authentic record of the historical facts and events taken place throughout the entire period of 472 years(25 generations, 1392~1863)described in a chronological order. The tremendous volume of the records contains the factual events taken place in almost all the fields of the Joseon Dynasty ranging from politics, economy to history of the dynasty. Not only because of its affluent contents but also with the precision of its records, it was designated as the National Treasure No. 151 in1973 by the Korean government and also registered as the Memory of the World by UNESCO in October 1997.This study is to report a exhaustive investigation results on the conservation state of annals of the Joseon Dynasty, especially Mt. Jeongjoksan edition, under the storage of the Kyujanggak in order to obtain the current condition, and thereby to estimate the any deterioration of the waxed volumes in the future. According to results of the investigation, we are going to verify damage causes of annals of the Joseon Dynasty, and to consider scientific conservation methods for the permanent preservation of invaluable cultural heritage. The major problem with the preservation of annals has arisen particularly from the deterioration of the waxed volumes of the Mt. Jeongjoksan edition. In order to provide for the counter measures for this problem, we have conducted twice investigations(first :1998~1999, second : 2003) to the internal and external conditions of waxed volumes(Annals of King Taejo~Annals of King Myeongjong).The result of the investigation has indicated that the paper quality of the some of the waxed volumes (Annals of King Taejong~Annals of King Sejong) is cracked and folded and the pages are imbedded to each other due to the hardened or congealed wax on the paper. Some of the pages are even getting moldy. And in order to detect as to whether“ there has been any deterioration progressed to the waxed books in the modern storage facility of the Kyujanggak equipped with constant temperature and humidity condition, the first investigation(1998~1999) and the second investigation(2003) have recorded the values of acidity, whiteness and moisture rate of the waxed paper, reporting an observation that there has been no difference on the measuring items. This indicates that no virtual deterioration has been progressed so far to the waxed volumes preserved in the Kyujanggak. Also, except for the causes of deterioration to the paper by insects and microorganisms, the major cause for the paper damage seems to the change of moisture of the paper caused from the alteration of the temperature and humidity of the storage environment. With this understanding in mind, we have conducted an environmental investigation on the three selected points of the storage in the aspects of the temperature, humidity, air current, $CO_2$,HCHO, and $SO_2$.It has been observed that the temperature stood at $16.9^{\circ}C~20.2^{\circ}C$ and the humidity was stable between 53%~56% during the period of the investigation. The concentration of the carbon monoxide and carbon dioxide of the storage were very similar to those in the air. These data lead to presume that there is no problem in the aspect of carbon oxidization. But the concentration of sulfur dioxide, hydrogen sulfide and formaldehyde of the storage were detected a little higher than those of standard. Therefore, we consider that it is necessary to ventilate the internal air of the store room by means of operating air purification devices.