• Composites Research
• /
• 제33권6호
• /
• pp.395-400
• /
• 2020

본 연구에서는 카본나노튜브(CNT) 면상발열체에 preceramic polymer 중 하나인 실세스퀴아잔을 코팅하여 고온에서 안정적인 발열이 가능한 CNT/SiCN 복합체 시트를 제조하였다. 제조된 복합체 필름은 FE-SEM을 통해 실세스퀴아잔이 CNT 면상발열체의 표면을 모두 코팅한 것을 확인하였다. 또한 800℃의 열처리를 통해 실세 스퀴아잔이 SiCN 세라믹으로 전환되어도 표면의 결함이 발견되지 않고 온전한 구조를 유지하는 것을 확인하였다. CNT/SiCN 복합체 시트는 질소와 공기 분위기 모두에서 기존의 CNT 시트보다도 높은 열적 안정성을 확보할 수 있었다. 마지막으로 제조된 CNT/SiCN 복합체 필름은 대기 중에서 700℃ 이상의 온도로 발열이 가능하였고 발열 후 온도를 식히고 재발열 또한 성공적으로 이루어졌다.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.197-204
• /
• 2022

Recently, the demand has increased for protective clothing materials capable of shielding the wearer from bullets, fragment bullets, knives, and swords. It is therefore necessary to develop light and soft protective clothing materials with excellent wearability and mobility. To this end, research is being conducted on hybrid design methods for various highly functional materials, such as carbon nanotube (CNT) sheets, which are well known for their low weight and excellent strength. In this study, a hybrid protective material using CNT sheets was developed and its performance was evaluated. The material design incorporated a bonding method that used a binder for interlayer combination between the CNT sheets. Four types of binders were selected according to their characteristics and impregnated within CNT sheets, followed by further combination with aramid fabric to produce the hybrid protective material. After applying the binder, the tensile strength increased significantly, especially with the phenoxy binder, which has rigid characteristics. However, as the molecular weight of the phenoxy binder increased, the adhesive force and strength decreased. On the other hand, when a 25% lightweight-design and high-molecular-weight phenoxy binder were applied, the backface signature (BFS) decreased by 6.2 mm. When the CNT sheet was placed in the middle of the aramid fabric, the BFS was the lowest. In a stab resistance test, the penetration depth was the largest when the CNT sheet was in the middle layer. As the binder was applied, the stab resistance improvement against the P1 blade was most effective.

• 공업화학
• /
• 제21권4호
• /
• pp.430-434
• /
• 2010

금속분말에 바인더, methyl ethyl ketone (MEK), cyclohexanone을 혼합한 슬러리를 이용하여 전자파 차폐용 시트를 제조하였으며, 이때 전기전도성이 높은 carbon nanotube (CNT)를 첨가하여 차폐효율을 증가시키고자 하였다. 제조된 시트는 주사전자현미경(SEM)과 energy dispersive spectroscopy (EDS)를 이용하여 표면분석과 성분분석을 실시하였다. 시트의 전기적 특성과 차폐효율은 4-Point Probe와 전자파차폐효율측정기를 이용하여 측정하였다. 전기저항은 CNT를 2% 첨가한 시트가 $13.13{\Omega}{\cdot}cm$로 가장 낮은 값을 나타내었으며, 전자파 차폐 효율 역시 CNT를 2%첨가한 시트가 63 dB로 가장 높은 값을 가지는 것으로 평가되었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.139-143
• /
• 2005

For application of carbon nano-tube (CNT) as a counter electrode materials of dye-sensitized solar cell (DSSC), the electrochemical behavior of CNT electrode was studied, employing cyclic-voltammetry (C-V) and impedance spectroscopy. Fabrication of CNT-paste and formation of CNT-counter electrode for characteristic measurement have been carried out using ball-milling and doctor blade process, respectively. Unit cell for measurements was assembled using Pt electrode, CNT electrode, and iodine-embedded electrolyte. Field emission-scanning electron microscopy (FE-SEM) was used for structural investigation of CNT powder and electrode. Sheet resistance of electrode was measured with 4-point probe method. Electrochemical properties of electrode, C-V and impedance spectrum, were studied, employing potentiogalvanostat (EG&G 273A) and lock in amplifier (EG&G 5210). As a results, the sheet resistance of CNT electrode is almost similar to that of F-doped SnO2 (FTO) coated glass substrate as approximately 10 ohm/sq. From C-V and impedance spectroscopy measurements, it was found that CNT electrode has high reaction rate and low interface reaction resistance between CNT surface and electrolyte. These results provides that CNT electrode were superior to that of conventional Pt electrode. Particularly, the reaction rate in the CNT electrode is about thrice high than Pt electrode. Therefore. CNT electrode is to be good candidate material for counter electrode in DSSC.

• 융합정보논문지
• /
• 제12권2호
• /
• pp.127-133
• /
• 2022

ITO와 CNT를 적용한 전극을 코팅하여 제작한 대전입자형 전자종이 디스플레이 패널을 제작하여 내구성 및 전기광학적 특성을 비교한다. ITO 전극의 면저항은 10(ohm/sq.)이고 CNT 전극의 면저항은 300, 600, 1000(ohm/sq.)이며 내구성 측정을 위하여 물리적 충격 및 유연성 측정을 진행한다. ITO 전극의 경우 40회의 충격과 10mm의 곡률 반지름에서부터 변화가 시작되나 CNT 전극에서는 변화가 측정되지 않는다. 입자 이동, 반사율 및 응답 시간 측정에 필요한 구동 전압, 전계 등 전기광학 측정결과 CNT 전극은 ITO 전극과 유사한 결과를 얻었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.474-475
• /
• 2009

As a substitute of ITO material, carbon nanotube (CNT) is widely studied for transparent conductive film (TCF). Current sheet resistance of CNT-TCF is about 100 ${\Omega}$/sq at 80% transmittance. But CNT-TCF performance in manufacturable level is about 500 ${\Omega}$/sq at 83% based on the Topnanosys Co's result. Therefore, critical issue in CNT-TCF research is to reduce the sheet resistance with manufacturing reliability. In this report, recent developments using CNT-TCF are introduced. Touch panel, transparent LED signboard, transparent speaker and transparent heater are representative examples. Also I describe the future issues and prospect of CNT-TCF for the flexible display.

• 반도체디스플레이기술학회지
• /
• 제12권3호
• /
• pp.7-12
• /
• 2013

Ni-CNT(Carbon Nanotube) composite coatings is were formed by electrodeposition and their physical properties were investigated with variations of CNT content(1, 3, 6. 9 g/L) in the electrolyte solution, while the current density and electroplating time were fixed respectively at $6A/dm^2$ and 90 min.. With increasing CNT content from 1 to 9 g/L, incorporated CNTs into the composite coating were limited from 4.65 wt.% to 7.38 wt.%. Microhardness and contact angle values were increased with increasing CNT content of upto 3 g/L. With increasing the CNT content further, physical properties were degraded due to agglomeration, poor adhesion of CNTs to Ni matrix and thus rough surfaces. Optimum electroplating conditions were found to be the CNT content of 3 g/L, current density of 6 A/dm2 and electroplating time of 90 min.

• Composites Research
• /
• 제26권1호
• /
• pp.14-20
• /
• 2013

CNT를 포함하는 전기방사된 PVDF를 작동기 제조의 소재로 사용하였다. 기계적, 전기적특성과 함께 작동기 성능을 평가하기 위해 전기화학적 환경 내에서 전기화학 및 작동기 거동을 조사하였다. 전기방사된 시트의 특징 중 하나인 유연함을 가지며 분산이 잘 되어 접촉면이 많은 이점이 있기 때문에 작동기 제작방법으로 적합하다고 생각되었다. 전기방사는 여러 가지 요인들로 방사형태가 각각 다르게 나타났다. 본 연구에서는 콜렉터를 드럼형태를 사용하여 방사된 나노섬유의 방향성을 가지게 하였으며 형태를 확인하기 위해 전자현미경을 통해 나노섬유가 정렬된 형상을 확인하였다. 전자침 X-ray 미세분석기를 사용하여 PVDF내에 CNT가 함침 되어 나노섬유가 정렬 된 상태를 확인하였으며, 이러한 형태가 미치는 기계적, 전기적 물성에 영향을 평가하기 위해 인장시험을 통해 인장강도와 전기 저항도를 측정하였다. 정렬된 방향의 나노섬유 시트가 정렬의 직각 방향의 시트보다 상대적으로 기계적 그리고 전기적 물성이 좋게 나타났다. 전기방사된 CNT/PVDF 나노섬유 시트가 작동기로 사용 되었을 때 캐스팅으로 제작된 PVDF 시트의 작동기보다 좋은 효율을 확인하기 위해 전기화학적 환경 내에서 작동기 시험을 진행하여, 작동기 효율과 전기적 용량을 측정하였다. 전기방사된 CNT/PVDF 나노섬유 시트는 CNT와 PVDF간의 접촉면이 많기 때문에, 우수한 작동성을 나타내었다.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.51-55
• /
• 2014

Ni-CNT(Carbon Nanotubes) composite coating is often used for the surface treatment of mechanical/electronic devices to improve the properties of the Ni coating. For the Ni-CNT coating, the dispersion of CNT fibers is a critical process. In this study, ultrasonic treatment instead of the conventional ball milling was attempted as a dispersion method for the electroless Ni-CNT coating. SEM-EDX analysis was performed and contact angle, sheet resistance, and micro-hardness were measured. Results showed that the ultrasonic treatment was comparable to the ball milling, as a dispersion method, but the difference was negligible. However, combined ball milling and ultrasonic treatment(double treatment) showed much improved micro-hardness value, above 350Hv(close to the value obtained by the Ni-CNT electroplating). In addition, electroless Ni-CNT(double-treated) coatings formed on the thin Ni film deposited by the electroless plating(double coating) showed better mechanical properties. Thus, double treatment and double coating are suggested as an improved electroless Ni-CNT coating method.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.482-487
• /
• 2023

A carbon-based hybrid resistor was fabricated using carbon nanotube (CNT) paste as an adhesive layer to establish electrically continuous ohmic contacts between CNT sheets and different CNT sheet or copper based metal alloy plates, and its electrical properties were evaluated. CNT sheets were fabricated using vacuum filtration with a CNT solution dispersed in isopropyl alcohol (IPA) solvent. The electrical characteristics of these carbon-based hybrid resistors were investigated. The CNT paste fulfilled the requirements for forming ohmic contacts between CNT sheets and metal alloy plates, which was attributed to the lowest work function difference and excellent wettability at the interface.