• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.293-296
• /
• 2003

We report on the fabrication and field emission of carbon nanotube field emitters for mass spectrometer. Due to its high aspect ratio and mechanical strength, we use vertically aligned multi-wall carbon nanotubes prepared by thermal chemical vapour deposition as cathodes, Electrons emitted from a CNT are to ionize some sample molecules. We have successfully attained patterned carbon nanotubes grown on two-dimensional 0.7 mm by 0.7 mm Ni square blocks on Si. The emission characteristics show that the field emission initiates at 200 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1470-1473
• /
• 2005

We proposed new triode-type Field Emitter Arays using Carbon NanoTubes(CNT-FEAs) as electron emission sources at low electric fields. The CNTs were selectively grown on the patterned catalyst layer by Plasma-Enhanced Chemical Vapor Deposition (PECVD). In this structure, gate electrodes are located underneath the cathode electrodes and extracted gate is surrounded by CNT emitters. Furthermore, in order to control density of CNTs, we investigated effect of using rapid thermal annealing (RTA).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.782-785
• /
• 2007

We studied the effect of current-aging on field emission from carbon nanotubes field emitter arrays (CNT-FEAs) selectively patterned by the resist-assistan tpatterning(RAP) process. After sustaining the electric field when starting emission current density $(J_s)$ is $0.1\;mA/cm^2$ during 40 hrs, it was observed that the field emission property and uniformity were remarkably improved due to the elimination of oxygen atom and thus the reconstruction of carbon bonding at the tip of CNTs during field emission.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.65-69
• /
• 2009

Carbon nanotubes (CNTs) were coated with undoped zinc oxide (ZnO) or 5 wt% gallium-incorporated ZnO (GZO) using various deposition conditions. The CNTs were directly grown on conical-type tungsten substrates at $700^{\circ}C$ using inductively coupled plasma-chemical vapor deposition. The pulsed laser deposition technique was used to deposit the ZnO and GZO thin films with very low stress. Field-emission scanning electron microscopy and high-resolution transmission electron microscopy were used to monitor the variations in the morphology and microstructure of CNTs prior to and after ZnO or GZO coating. The formation of ZnO and GZO films on CNTs was confirmed using energy-dispersive x-ray spectroscopy. In comparison to the as-grown (uncoated) CNT emitter, the CNT emitter that was coated with a thin (10 nm) GZO film showed remarkably improved field emission characteristics, such as the emission current of $325\;{\mu}A$ at 1 kV and the threshold field of $1.96\;V/{\mu}m$ at $0.1\;{\mu}A$, and it also exhibited the highly stable operation of emission current up to 40 h.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.51-51
• /
• 2008

Carbon nanotubes (CNTs) have long been reported as an ideal material due to their excellent electrical conductivity and chemical and mechanical stability as well as their high aspect ratios for field emission devices. CNT emitters made by screen printing the organic binder-based CNT paste may act as a source to release gases inside a vacuum panel. These residual gases may cause a catastrophic damage by electrical arcing or ion bombardment to the vacuum microelectronic devices and may change their physical or electrical properties by adsorbing on the CNT emitter surface. In this study, we analyzed the composition of residual gases inside the vacuum-sealed panel by residual gas analyzer (RGA), investigating the effects of individual gases of different kinds at several pressures on the field emission characteristics of CNT emitters. The residual gases included $H_2$, CO, $CO_2$, $N_2$, $CH_4$, $H_2O$, $C_2H_6$, and Ar. Effect of residual gases on the field emission was studied by observing the variation of the pulse voltages with the duty ratio of3.3% to keep the constant emission current of $28{\mu}A$. Each gas species was introduced to a vacuum chamber up to three different pressures ($5\times10^{-7}$, $5\times10^{-6}$, and $5\times10^{-5}$ torr) each for 1 h while electron emission was continued. The three different pressure regions were separated by keeping a high vacuum of $\sim10^{-8}$ torr for a 1 h. The emission was terminated 6 h after the third gas exposure was completed. Field emission characteristics under residual gases will be discussed in terms of their adsorption and desorption on the surface of CNTs and the resultant change of work function.

• 한국진공학회지
• /
• 제18권2호
• /
• pp.79-84
• /
• 2009

삼극형(triode type) 전자 방출원을 프린팅된 CNT(Carbon Nanotube) 에미터를 이용하여 제작하였다. 후면노광(Back Exposure)방법으로 CNT 에미터의 높이를 균일하게 하고, 나노 Ag를 첨가하여 CNT와 전극 사이의 접착력 및 전기전도성을 높임으로써 고전압, 고전류 구동 시 신뢰성을 확보하였다. 게이트 높이가 에미터 길이에 비해 비교적 높은 매크로 게이트 구조를 사용하여 누설 전류가 적고 안정적인 구동이 가능하였다. 제작된 삼극형 전자 방출원은 DC 전압이 인가된 상태에서 일정시간동안 전계방출 전류를 측정하여 신뢰성을 평가하였다. 가열 배기 에이징(Aging) 과정을 거친 경우 약 12 시간동안 안정적인 전계방출 특성을 보였다. 이 때 게이트 누설전류는 약 10 % 미만이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1253-1256
• /
• 2007

A display device combining plasma display panel (PDP) and field emission display (FED) is proposed to achieve high luminous efficiency. The device can avoid the main energy loss channels of both PDP (ion loss) and FED (low CL efficiency). $2{\sim}6$”-diagonal test panels with carbon nano-tube (CNT) electron emitter and Xenon ambient gas showed the luminous efficiency of 4.14lm/W and brightness of $263cd/m^2$ at 35V (1kHz, 1% duty), indicating that it is a good candidate for the low voltage driven, highly efficient next generation display.

• Journal of Information Display
• /
• 제4권2호
• /
• pp.35-42
• /
• 2003

The field emission and luminescent properties of carbon nanotubes (CNTs) that were straightened by argon ion irradiation were investigated. Argon ion irradiation permanently straightened both as-grown and screen-printed CNTs (SP-CNTs) in the presence of a strong electric field. The straightening process enhanced the emission properties of as-grown CNT films by showing a decrease in turn-on field, an increase in total emission current, and a stable emission. Recurring problems associated with SP-CNTs, such as bent or/and buried CNTs and the degradation in binder-residue-induced emission, were improved by the permanent straightening of CNTs and protruding CNTs from binders by the irradiation treatment, in addition to its surface cleaning effect. Furthermore, we confirmed that the number of emission sites increases by observing the luminescent properties of CNT films after the straightening. These findings here suggest that ion irradiation treatment is an effective method for achieving uniform field emission and to reduce the electrical aging time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1220-1221
• /
• 2008

Submicron-sized conical-type tungsten(W) field-emitters based on carbon nanotubes(CNTs) are fabricated with the configuration of CNTs/catalyst(Ni)/buffer(Al/Ni/TiN)/W-tip. This study focuses on elucidating how the Al/Ni/TiN stacked buffer layer affects the structural properties of CNTs and the electron-emission characteristics of CNT-emitters. Field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), and x-ray photoelectron spectroscopy(XPS) are used to monitor the nanostructures, surface morphologies, chemical bonds of all the catalysts and CNTs grown. The crystalline structure of CNTs is also characterized by Raman spectroscopy. Furthermore, the measurement of field-emission characteristics for the field-emitters fabricated shows that the emitter using the Al/Ni/TiN stacked buffer reveals the excellent performances.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.311-312
• /
• 2006