• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.1-17
• /
• 2023

Based on Ahmadzadeh-Varvani hardening rule (A-V model), multiaxial ratcheting effect of Z2CND18.12N austenitic stainless steel is simulated by ABAQUS with user subroutine UMAT. The results show that the predicted results of the origin multiaxial A-V model are lower than the experimental data, and it is difficult to control ratcheting strain rate. In order to improve the predicted capability of A-V model, the A-V model is modified. In this study. Moreover, under the assumption of the von Mises yield criterion and normal plasticity flow rule, we develop a numerical algorithm of plastic strain with the improved model to implement the finite element calculation of the model. Internal iteration in the numerical algorithm was implemented with the Euler backward method, which calculated the trial strain for each equilibrium iteration using the consistent tangent matrix. With a user subroutine, the proposed model is programmed into ABAQUS for a user - executable version. By simulating the uniaxial ratcheting of a round bar made of Z2CND18.12N austenitic stainless steel, we observe that the predicted results simulated by ABAQUS with UMAT are compared with the experimental data. The predicted results of the improved multiaxial A-V model are consistent well with the experimental data.

• 공학교육연구
• /
• 제26권1호
• /
• pp.20-26
• /
• 2023

In this study, as a competency strengthening program to support learner-centered education, we developed the 'Capstone-design competency Program' for the purpose of cultivating the 4C skills and problem-solving ability required as core competencies of the 21st century. The program was based on the project method, and strategies were derived and materialized for each step through core competency analysis. Then, the validity was confirmed through the implementation of the program. As a result of the implementation of the program, it was confirmed that this program was effective in cultivating the core competencies of college students. In addition, it was confirmed that learners showed results such as specific reflection on core competencies, changes in perspective, and action plans, so that the possibility of actual application was high.

• 디지털콘텐츠
• /
• 4호통권155호
• /
• pp.43-45
• /
• 2006

대용량 콘텐츠의 수요가 증가하면서 이를 전송해주는 CDN서비스에 대한 관심이 증폭되고 있다. 콘텐츠 공급자의 공급 망 서비스 대행에서 출발한 CND은 인터넷 서비스 영역이 확장됨에 따라 CDN영역도 자연스럽게 확대되고 있다.

• 한국지반환경공학회 논문집
• /
• 제14권1호
• /
• pp.5-13
• /
• 2013

사질토 지반에 근입된 말뚝의 주변부에서는 말뚝의 수직하중에 의한 전단변형 시, 반경방향으로의 변위가 구속된다. 이러한 연직변위 구속상태에서의 전단강도는 기존의 직접전단실험으로는 모사하는데 어려움이 있다. 본 연구의 목적은 직접전단동안 연직변위를 허용하는 연직변위 허용조건(Free Normal Displacement: FND)의 직접전단실험과 연직변위를 허용하지 않는 연직변위 구속조건(Constrained Normal Displacement: CND)의 직접전단실험을 통하여 연직변위 구속여부가 전단강도에 미치는 영향을 평가 하는 것이다. 직접전단실험은 균등한 입도분포를 갖는 주문진 표준사를 사용하여, 연직변위의 구속여부에 따라 다양한 상대밀도와 초기응력조건 상태에서 수행되었다. 실험결과, CND 직접전단실험에서 얻은 전단강도는 FND 직접전단실험에서 얻은 전단강도보다 크게 나타났다. 또한, 상대밀도가 클수록 연직변위의 구속효과로 인한 전단강도의 증분이 더욱 늘어남을 보여주었다. 반면, 초기 연직응력의 증가는 구속효과로 인한 전단강도 증분의 감소로 나타나는 것을 관찰하였다. 본 연구에서는 경계부가 구속된 사질토지반의 안정성 평가 시, 전단강도에 대한 연직변위의 구속효과를 고려해야 함을 보여준다.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.29-50
• /
• 2015

With a quasi-three point bending apparatus, ratcheting deformation is studied experimentally on a pressurized austenitic stainless steel Z2CND18.12N pipe under bending load and vertical displacement control, respectively. The characteristic of ratcheting behavior of straight pipe under both control methods is achieved and compared. The cyclic bending loading and internal pressure influence ratcheting behavior of pressurized straight pipe significantly under loading control and the ratcheting characteristics are also highly associated with the cyclic displacement and internal pressure under displacement control. They all affect not only the saturation of the ratcheting strain but the ratcheting strain rate. In addition, ratcheting simulation is performed by elastic-plastic finite element analysis with ANSYS in which the bilinear model, Chaboche model, Ohno-Wang model and modified Ohno-Wang model are applied. By comparison with the experimental data, it is found that the CJK model gives reasonable simulation. Ratcheting boundaries under two control modes are almost same.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.89-94
• /
• 2018

Uniaxial ratcheting behavior of Z2CND18.12N austenitic stainless steel used nuclear power plant piping material was studied. The results indicated that ratcheting strain increased with increasing of stress amplitude under the same mean stress and different stress amplitude, ratcheting strain increased with increasing of mean stress under the same stress amplitude and different mean stress. Based on least square method, a suitable method to arrest ratcheting by loading the materials was proposed, namely determined method of zero ratcheting strain rate. Zero ratcheting strain rate occur under specified mean stress and stress amplitudes. Moreover, three dimensional ratcheting boundary surface graph was established with stress amplitude, mean stress and ratcheting strain rate. This represents a graphical surface zone to study the ratcheting strain rates for various mean stress and stress amplitude combinations. The graph showed the ratcheting behavior under various combinations of mean and amplitude stresses. The graph was also expressed with the help of experimental results of certain sets of mean and stress amplitude conditions. Further, experimentation cost and time can be saved.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1166-1174
• /
• 2019

이 논문에서는 사람 재식별 모델인 PersonNet의 성능을 개선하는 방법을 제안하고 실험한다. 특징점 추출을 위해 인셉션 레이어를 접목하여, 기존 32개의 특징점을 154개로 증가시켜 강화하였다. 또한, PersonNet에서 사용하는 CND 방식을 수정하여 비대칭성을 완화하였고, 보행자 이미지의 특징점을 3부분으로 나누어 가중치를 적용한 방법을 적용하여 특징을 더 뚜렷하게 파악하도록 하였다. 성능 평가를 위해 CUHK01, CUHK03 그리고 Market-1501 3가지의 데이터베이스를 사용하였고 실험 결과 27~31% 성능이 개선되었다.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.132-137
• /
• 2010

Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

• 지질공학
• /
• 제27권1호
• /
• pp.51-58
• /
• 2017

이 연구는 저주파 결함 탐지법을 이용하여 하중단계에 따른 암석 내부의 상태를 정량적으로 평가하는 것이다. CND에 의한 초기 종파속도는 X축 방향 1687.5 m/s, Y축 방향 1690.7 m/s, Z축 방향 1548.3 m/s이며, 평균 1642.2 m/s로 Z축 < X축 < (${\fallingdotseq}$)Y축 관계를 보였다. 실버슈미트 해머에 의한 Q값의 전체 평균은 62.6으로 약 105 MPa의 일축압축강도에 해당되었다. 저주파 결함 탐지기에 의해 측정된 하중단계 50%, 60%, 70%, 80% 수준에서 종파속도 크기는 X축 < Y축 < Z축 순으로 대체적으로 하중단계가 증가함에 따라 감소하는 경향을 보였다. 하지만, 이들 값은 초기 종파속도와 다른 경향을 나타냈다. 하중단계가 증가함에 따라 Y축이나 Z축 방향보다 X축 방향의 종파속도를 감소시키는 요인이 더 많은 영향을 미쳤기 때문으로 판단된다. 이러한 사실은 암석 내부의 초기상태는 응력상태가 변화함에 따라 다르게 나타날 수 있다는 것을 의미한다.

• 아시안잔디학회지
• /
• 제13권1호
• /
• pp.29-36
• /
• 1999

This study was conducted to make the utmost use of the good traits and to improve the poor traits of zoysiagrass through the production technology for mixed lines sod in addition to breeding. Mixed lines sod was produced by mixing broad or middle leaf line with narrow leaf line by volume, a ratio of 1 to 2. The mixed lines sod of zoysiagrass was superior to the single ling sod, which is used commonly, for the establishment rate, coverage rate, shoot density, texture, leaf color, dormancy period cnd color, and visual quality.