• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.269-274
• /
• 1999

This paper aims to DNC application of car fuel tank die working. DNC system is consist of CAD, CAM software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.23-28
• /
• 2002

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.329-334
• /
• 2004

This paper proposes Internet-based checking scheme for machine-tools with a variant CNC. Checking points defined in this research are classified into two categories such as structured point and operational point. The formal includes the vibration of bearing, temperature of spindle unit and another periodical management. And the latter includes oil checking, clamp locking/unlocking and machining on/off status. Through this research, for the global management of variant CNC machines interspersed with CAC and OAC in manufacturing system, the suitable environment for Internet-based checking of variant CNC machines was designed and the checking methods for CAC and OAC machines were compared with each other.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.24-31
• /
• 2003

In the gas cutting of plate steel, the quality of the cut surfaces and sections is strongly dependent on the cutting conditions such as cutting speed, kerf width, plate thickness, material, distance between tip and specimen, and cutting oxygen pressure etc. The cutting tests of plate steel were carried out using CNC gas cutting machine. This paper deals with cut surface and section characteristics of plate steel in CNC gas cutting. Both top and bottom widths of kerf, the surface roughness(Ra, Rmax) of cutting surfaces are measured under various cutting conditions such as cutting speed, material, distance between tip and specimen, and cutting thickness. The photographs of cut surface and cut section are also analyzed under various cutting conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.149-154
• /
• 2003

The cutting tests of high tensile steel plate(AH36) were carried out using CNC plasma arc cutting machine. Both top and bottom width of kerf and the surface roughness(Ra, Rmax) of cut surface are measured under various cutting conditions such as cutting speed, steel plate thickness, etc. In the CNC plasma arc cutting, the surface roughness decreases as cutting speed increases. The hardness is high up to 4mm depth from the cutting surface. In the cutting speed 1300~2100mm/min, the ratio of proper kerf width(Wt/Wb) is around 2.6. Through the series the series of experiments, the satisfactory cutting conditions of high tensile steel plate were found.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.48-52
• /
• 2002

The fault analysis of the CNC machine tool which is controlled sequentially by PLC is generally based on ladder diagram. When machine tool has faults, it takes a lot of operator's experiences and times to identify logical relationship because ladder diagram is a step structured language. Therefore the technologies of finding out fault reasons automatically is necessary. In this paper, the SFG(Switching Function Generator) system is developed to analysis fault reasons correctly. The SF(Switching Function) and SSF(Step Switching Function) generated from SFG based on ladder diagram are experimented to identify the performance of SFG.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.50-56
• /
• 2007

Wire forming machine is widely used in industries to make a variety of wire products such as coil springs and links. Along with the rapid development of CNC technologies, the usage of wire forming machine varies from single-purpose machinery to universal CNC machinery. Rotating the wires while feeding them simultaneously, we can improve the performance of the machines with aspects of efficient tooling and complicated geometric forming. In this study, a new gear train is developed for the control of both feeding and rotating wires independently at the same time. The developed mechanism has many benefits as following, making more complicated geometric and precision products, easier tooling, and simpler programming.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.85-91
• /
• 2015

Current world aircraft industry studies on the precision of the product are in active progress. Particularly in terms of improving the quality of processed products in terms of the surface roughness of the dimensional accuracy, fatigue strength, and corrosion resistance, which affect a lot of research on surface roughness, has been investigated. In this study of aluminum alloy, 7075 aircraft aluminum is used in a cutting CNC lathe machine for the cutting speed and feed rate according to the cutting experiments that were conducted. Additionally, the machine tool of the cooling method soluble cutting oil, insoluble cutting oil by cooling, and cooling the workpiece by cutting surface roughness will be investigated. Through the method and soluble cutting oil coolant cooled by the cutting speed increases, the value of surface roughness showed a regular result. Tool nose radius of 0.8 mm than 0.4 mm picture of when approximately 50 of the surface roughness values were less.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.448-453
• /
• 2003

This paper researched about technique of Opened CNC that were able to adapt themselves to rapid development of software and hardware. It is basic research what develop a scheme whereby technic make property. This paper theorized about to realize Opened CNC Software which is developing CNC Software flow from building Windows CE operating system's image that is possible realtime acting and multitasking. And Opened CNC Software's component designed independent classified modules. Classify Opened CNC Software's component which was consisted of basic OS Kernel, NC Code parser, Servo Motor Control, Software PLC, MMI(Man-Machine Interftce). And show there's functional example