• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.1-9
• /
• 2009

In this paper, a small area 12-bit 300MSPS CMOS Digital-to-Analog Converter(DAC) is proposed for display systems. The architecture of the DAC is based on a current steering 6+6 segmented type, which reduces non-linearity error and other secondary effects. In order to improve the linearity and glitch noise, an analog current cell using monitoring bias circuit is designed. For the purpose of reducing chip area and power dissipation, furthermore, a noble self-clocked switching logic is proposed. To verify the performance, it is fabricated with $0.13{\mu}m$ thick-gate 1-poly 6-metal N-well Samsung CMOS technology. The effective chip area is $0.26mm^2$ ($510{\mu}m{\times}510{\mu}m$) with 100mW power consumption. The measured INL (Integrated Non Linearity) and DNL (Differential Non Linearity) are within ${\pm}3LSB$ and ${\pm}1LSB$, respectively. The measured SFDR is about 70dB, when the input frequency is 15MHz at 300MHz clock frequency.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.36-38
• /
• 2000

An optoelectronic database filter chip for high performance database computers and applications is proposed. The proposed device is designed to perform the selection and projection operations of relational database operation on-the-fly in page-parallel manner to increase the overall performance of a database system. The device utilizes CMOS smart pixel array consists of detector and combinational logic circuit to perform the selection and projection operation.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.195-198
• /
• 2000

It is possible to perform the digital fuzzy logical high-speed and high-precision computation by the use of redundantly-represented binary positive-digit number arithmetic operation. In this paper, as basic operation circuits in the fuzzy logic new voltage-mode 4-valued binary parallel processing operation circuits using positive redundantly-expressed binary-coded numbers is discussed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.9
• /
• pp.27-36
• /
• 1992

A design of scanning electrode driving IC chip has been implemented aiming at the application to liquid crystal color television displays. The chip reflects the design characteristics of high quality liquid crystal panels and satisfies specifications of NTSC type color television displays. The design was verified using logic and circuit simulation, and fabricated using a high voltage CMOS process. A fully working die has been obtained that can be readily applicable to commercial color liquid crystal panels.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.67-74
• /
• 2014

This paper presents a memristor-CMOS based RBSD adder. Conventional RBSD adders suffer bigger hardware due to the extra logic handling larger number of bits. The purpose of this paper is to improve the silicon surface area and the computation delay of conventional RBSD adders. The proposed method employs memristor-CMOS based circuit. The implementation results shows that the proposed memristor-CMOS based RBSD adder saves the cell area by 45%, and reduces time delay 24% compared to conventional RBSD adders. The proposed RBSD adder design can bring further area saving for large scale designs.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1093-1096
• /
• 1998

The architecture and circuit design of low voltage, high performance barrel shifter is proposed in this paper. The proposed architecture consists of two arrays for byte and bit rotate/shift to perform 32-bit operation and is preferred for even bigger data length as it can be adapted for 64-bit extention with no increase of number of stages. NORA logic structure was used for circuit implementation to achieve the best performance in terms of speed, power and area. The complicated cloking control has been resolved with the ingenious design of clock dirver. The circuit simulation results in 3.05ns delay, 9.37㎽ power consumption at 1V, 160MHz operation when its implemented in low power $0.5\mu\textrm{m}$ CMOS technology.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.408-418
• /
• 1998

This paper presents the implementation of comparator which is self-testing with respect to the faults caused by any single physical defect likely to occur in NMOS and CMOS integrated circuit. The goal is to use it for the fault-tolerant system. First, a new fault model for PLA(Programmable Logic Array) is presented. This model reflects several physical defects in VLSI circuits. It focuses on the designs based on PLA because VLSI chips are far too complex to allow detailed analysis of all the possible physical defects that can occur and of the effects on the operation of the circuit. Second, this paper shows that these design, which has been implemented with 2 level AND-ORor NOR-NOR circuit, are optimal in term of size. And it also presents a formal proof that a comparator implemented using NOR-NOR PLA, based on these design, is sol f-testing with respect to most single faults in the presented fault model. Finally, it discusses the application of the self-testing comparator as a building block for the implementation of the fault-tolerant system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.455-458
• /
• 2011

4:10 deserializer is proposed to recover 1:10 serial data using 1/4-rate clock. And then, 1/4-rate CDR(Clock and Data Recovery) circuit was designed for SERDES of high-speed serial display interface. The reduction of clock frequency using 1/4-rate clocking helps relax the speed limitation when higher data transfer is demanded. This circuit is composed of 1/4-rate sampler, PEL(Phase Error Logic), Majority Voting, Digital Filter, DPC(Digital to Phase Converter) and 4:10 deserializer. The designed CDR has been designed in a standard $0.18{\mu}m$ 1P6M CMOS technology and the recovered data jitter is 14ps in simulation.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.1-7
• /
• 2010

This paper presents a low power digital PLL architecture and design for implementation of the PLL-based frequency synthesizers. In the proposed architecture, a wide band digital logic quadricorrelator is used for preliminary frequency detector and a narrow band digital logic quadricorrelator is used for final DCO control. Also, a circuit technique for reducing leakage current is adopted in order to minimize the standby mode power consumption of the deactivated block. The proposed digital PLL is designed and verified by MyCAD with MOSIS 1.8V $0.35{\mu}m$ CMOS technology, and the simulation results show that the power consumption can be lowered by more than 20%.