• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.43-52
• /
• 2021

As port development in soft ground is actively promoted for international logistics and transportation, the Deep Mixing Method (DMM) is continuously applied to form an improved column body directly in the ground by mixing cement with soil to secure the stability of the structure. However, in the case of cement, there is a problem of emitting a lot of greenhouse gases during the production process, so the development and use of new alternative materials are socially required to achieve the national goal of carbon neutrality. Accordingly, in this study, CMD-SOIL, developed to induce a hardening reaction similar to cement by recycling recycled resources, was used as a ground improvement material for the DMM. In addition, it was attempted to determine the possibility of replacing cement by conducting on-site test construction and evaluating applicability. As a result of the study, the compressive strength of CMD-SOIL compared to the design reference strength was 1.46 to 2.64 times higher in the field mixing test and 1.2 to 5.03 times higher than in the confirmed boring. In addition, the ratio (λ) of the compressive strength in the field to the design reference strength was 0.63 to 1.14, which was similar to the previous research results. Therefore, in the case of CMD-SOIL, it is possible to express the compressive strength necessary to secure stability, and there is no difference in applicability compared to existing materials such as ordinary portland cement and blast furnace slag cement, so it was analyzed that it could be used as a ground improvement material for the DMM.

• Journal of Oral Medicine and Pain
• /
• v.18 no.2
• /
• pp.131-147
• /
• 1993

To evaluate the contribution of head/neck posture to signs/symptoms of craniomandibular disorder(CMD), the author clinically, cephalo-metrically, analyzed craniomandibular index (CMI), clinical dysfunction index(CDI), occlusal index(OI) and head posture, cervical spine, cervicovertebral anatomy, craniofacial variables from 30 CMD patients and control. And the author analyzed difference between patients and control, and the correlation between CMI, CDI and head posture, cervical spine, cervicovertebral anatomy, craniofacial variables in CMD patients and control. The obtained results were as follows : 1. There was very high significant correlation between CMI and CDI(r=0.8969, p<0.01). 2. There was significant difference between patients and control in head/neck posture, head/neck anatomy(p<0.05). 3. There was significant correlation between CMI, CDI and head posture, cervical spine, cervicovertebral anatomy, craniofacial variables(p<0.05). 4. There was more significant correlation between DI and head/neck posture, head/neck anatomy than between PI and head/neck posture, head/neck anatomy in CMD patients(p<0.05)

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.309-315
• /
• 2020

This study examines the accounting students' level of moral development at the university. In this study, we focused on the effects of ethics subject and gender on moral development. Therefore, we compare the moral development of male and female students. We evaluated 216 students in Cognitive Moral Development (CMD) from 17 universities in Indonesia. We measured CMD with the Defining Issues Test (DIT) model developed by Rest in 1986. The findings show that there is no difference in DIT scores between students who have taken the ethics subject and who have not taken. We also confirm female students have a higher DIT score than male students. Our study results show that gender plays an important role in the ethics issue. Our study strengthens the previous research about the effect of ethics study and ethics courses on CMD. This study has an implication for ethics education in university wherein the curriculum or the system should be prepared carefully. Although the results of this study did not show that ethics subject has a strong impact on students' CMD, we still believe that the ethics course plays a significant role in the accountants' morals. For that reason, we argue that morals need time to be developed, and cannot be taught in a short-term course. Future research is needed to explore more about this issue.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1697-1706
• /
• 2013

Protocol analyzer is being used to analyze proper processing of CMD & data when developing SD slave IP. In this thesis, a protocol analyzer was developed for analyzing SD protocol in Windows environment using Visual C++. SD protocol analyzer consists of embedded Linux software for storing SD memory data and MFC program for analyzing this. As for protocol analysis, it has been designed to collect data transmitted from SD memory card to host by Linux software for its analysis by MFC. It was found through the experiment that the CMD type could be confirmed that occurs when reading and writing data to SD memory card using the developed board, and debugging the problems that occur was possible.

• Journal of Genetic Medicine
• /
• v.13 no.2
• /
• pp.105-110
• /
• 2016

Congenital myotonic dystrophy (CMD) which is transmitted in an autosomal-dominant manner, can also be observed in newborns born to asymptomatic parents who have a myotonic dystrophy type 1 or premutation allele, especially from the mother. A mother with myotonic dystrophy could be subfertile and the pregnancy could be complicated with the risk of a preterm birth. Newborns with CMD may demonstrate symptoms such as hypotonia and poor motor activity, as well as respiratory and feeding difficulties. Additionally, CMD has a high mortality rate at birth. Detection of the signs and symptoms during pregnancy is helpful for a prenatal diagnosis of CMD in cases where the family history is not known.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2016

In this study, laboratory mixture design test and field test were performed to evaluate applicability of eco-friendly binder material (CMD-SOIL) using desulfurized dust in deep cement mixing method (DCM). As a result of laboratory mixture design test, the uniaxial compressive strength of CMD-SOIL was up to 1.136 times bigger than slag cement by changing the water content, mixing rate, and W/B. Also, it had shown the strength up to 1.222 times bigger in shell content and up to 1.363 times in mixing of floating soil. As a result of field test, field strength/laboratory design criterion strength ratio (${\lambda}$) is shown 0.77. And this result was similar to earlier studies. From this result, CMD-SOIL can show the same efficiency compared with existing binder.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.133-140
• /
• 2000

From the VI images of M13, obtained by using 2K CCD camera and the BOAO 1.8m telescope, we derive the(V - I) - V CMD of M13. From the shapes of red giant branch, the magnitude of horizontal branch, and the giant branch bump on the constructed CMD, we determined the metallicity of the globular cluster to be 1.74${\lesssim}$[Fe/H]${\lesssim}$-1.41. The good agreement between our determination of [Fe/H] and those determined by using other methods implies that the morphology of red giant and horizontal branches on (V - I) - V CMD's can be good indirect metallicity indicators of Galactic globular clusters.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.109-114
• /
• 2005

A bacterium capable of emulsifying hydrocarbon, n-hexadecane, and decreasing surface tension of the culture media using oil collapsing method was isolated. The bacterium was partially identified as Bacillus sp. and named BJS-51. n-Hexadecane was the most effective carbon source for production of biosurfactant. Surface tension was decreased from 76 dyne/cm to 31 dyne/cm and CMD (critical micelle dilution) had the highest value of 5.7 at 3% n-hexadecane. Ammonium phosphate was the most effective nitrogen source, when C/N ratio was 60, surface tension and CMD were 29 dyne/cm and 9.2, respectively. Optimum pH and temperature were 7.2 and $30^{\circ}C$, respectively. Produced biosurfactant was extracted and purified using organic solvent extraction method and preparative HPLC systems. After analysis by various color reaction, this biosurfactant was identified as lipopolysaccharide. Surface tension and CMC (critical micelle concentration) of purified biosurfactant were 27 dyne/cm and 0.08 g/l, repectively. CMD was 9.2, so the yield of biosurfactant was about 0.74 g/l at the optimal conditions. The biosurfactant was very stable at wide range of $pH\;2{\sim}12$ with surface tension $29{\sim}31\;dyne/cm$ and showed $29{\sim}30\;dyne/cm$ of surface tension after heat treatment at $100^{\circ}C$ for 60 min.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.147-153
• /
• 1994

We present a deep(B, V) color-magnitude diagram (CMD) of the Galactic globular cluster NGC 4372. According to the recent inside-out picture of Galaxy formation, this cluster is predicted to be one of the oldest globulat clusters in the Galaxy. Our CMD shows a well defined main-sequence extending ∼ 2 magnitudes below the trunoff. Despite the uncertainty that stems from the small sample size of bright stars, comparison with the Revised Yale Isochrones suggests that this cluster may indeed be one of the oldest (∼16.6 Gyrs) globular clusters in our Galaxy.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.230-232
• /
• 1999

KOMPSAT(KOrea Multi-Purpose SATEllite) Flight Software[2]의 개발 단계에서 통합 및 시험, 검증 시험을 위해 실제 시스템과 유사한 환경을 제공하는 개발도구로서 STB(Software Test BED)를 개발하였으며 STB 구성중에서 Command/Telemetry (CMD/TLM) 테스트를 위해 개발한 Command Generator / Telemetry Analyzer에 관한 내용을 본 논문에서 설명하고자 한다. 통신간에 사용되는 프로토콜은 [1]에서 언급한 바와 같이 CCSDS 프로토콜을 따르고 모든 관련된 Command 와 Telemetry 형식 또한 [1]에서 언급한 바와 같다. 이 구현된 소프트웨어를 이용하여 Flight Soaftware내의 CMD/TLM 처리 소프트웨어의 기능시험과 검증시험을 수행하였다.