• 한국의류학회지
• /
• 제18권1호
• /
• pp.113-120
• /
• 1994

The Purpose of this study was to improve the moisture related properties of viscose rayon fibers. Viscose rayon filament yarns were partially etherified to make CMC fibers. CMC fibers were converted to the sodium, calcium, and ferric salt forms by an ion exchange method. The property changes of ion exchanged CMC fibers were examined. Cation contents of fibers were varied depending on the degree of substitution of CMC fibers. The strength of Na, Ca, Fe-CMC was higher than H-CMC owing to the plasticization by moisture sorption and the crosslinking by cations. The moisture regain was increased by carboxymethylation and that of Fe-CMC showed the highest value. The degree of swelling determined by the water retention value was observed to be Na-CMC > Ca-CMC > H-CMC > Fe-CMC. The solution retention value was decreased in the order . Ca-CMC > Na-CMC > H-CMC > Fe-CMC.

• 동위원소회보
• /
• 제21권4호
• /
• pp.46-54
• /
• 2006

Biocompatible and biodegradable hydrogels based on carboxymethyl cellulose(CMC) and polyethyleneglycol(PEG) were prepared far physical barriers for preventing surgical adhesions. These interpolymeric hydrogels were synthesized by a gamma irradiation crosslinking technique. The 1Scmxl.Scm of cecal serosa and adjacent abdominal wail were abraded with bane burr until tbe serosal surface was disrupted and hemorrhagic but not perforated. and the serosa of tbe cecum was sutured to the abdominal wall in 5mm apart from the injured sire. The denuded cecum was covered with either CMC/PEG hydrogels or solution from CMC/PEG hydrogel. Control rat serosa was not covered. Two weeks later. the rats were sacrificed and adhesion was scored on a 0-5 scale. No treatment showed the significantly higher incidence of adhesions than either CMC/BEC hydrogels or solution from CMC/PEG hydrogel. In conclusion, these studies demonstrate that CMC/BEG hydrogels have a function of prevention of intra abdominal adhesion in a rat model.

• 대한의용생체공학회:의공학회지
• /
• 제39권4호
• /
• pp.161-167
• /
• 2018

Polyvinyl alcohol/sodium carboxymethyl cellulose (PVA/NaCMC) hydrogels were prepared by physical crosslinking (cyclic freezing/thawing) and gamma (${\gamma}$)-ray irradiation to evaluate the effect of NaCMC concentration (2~8 wt%) on the mechanical properties and the biocompatibility of the PVA/NaCMC hydrogels. The swelling rate of PVA/NaCMC hydrogels regardless of irradiation rose with increasing NaCMC content from 2 wt% to 8 wt%, while the gelation rate was the reverse. As the NaCMC content increased from 2 wt% to 6 wt%, the compressive strength of the hydrogels increased dramatically from $8.5{\pm}2.0kPa$ to $52.7{\pm}2.5kPa$ before irradiation and from $13.5{\pm}2.9kPa$ to $65.5{\pm}8.7kPa$ after irradiation. When 8 wt% NaCMC was added afterwards, the compressive strength decreased however. The irradiated PVA/NaCMC hydrogels containing 6 wt% NaCMC exhibited the tailored properties of the swelling rate of $118{\pm}3.7%$, the gelation rate of $71.4{\pm}1.3%$, the strength of $65.5{\pm}8.7kPa$, respectively, and no cytotoxicity was observed.

• 한국결정성장학회지
• /
• 제32권3호
• /
• pp.107-114
• /
• 2022

Carboxymethyl cellulose/poly(ethylene glycol) (CMC/PEG) hydrogels crosslinked with citric acid (CA) are synthesized to evaluate the effect of CMC molecular weight (Mw), PEG and CA concentration on the optical property, swelling rate (SR), degradation rate (DR), and cytotoxicity and cell proliferation of hydrogels. For crosslinked CMC/PEG hydrogels, the FT-IR peak intensity associated with hydroxyl groups decreases due to PEG intercalation (esterification crosslinking) between CMC chains in a similar manner as the concentration of CA crosslinker increases. Crosslinked CMC (Mw = 90,000)/PEG hydrogels with 10 % CA dissolve regardless of PEG content. However, the SR of the CMC (Mw = 250,000)/PEG hydrogels decrease from 4923 % to 168 % with increasing PEG and CA concentrations from 0 to 20 % and from 0 to 25 %, respectively. As the Mw of CMC increases, the DR of the hydrogel is greatly improved. CMC (Mw = 250,000)/PEG10 hydrogels with 10 % CA exhibit the optimum properties of high absorbing capacity (3,200 %) with moderate DR (54 %), stiffness (1.39 ± 0.19 GPa), and cell viability (94.8 ± 1.3 %). CA-crosslinked CMC/PEG hydrogels are highly suitable for wound dressing or personal care applications due to their non-toxicity, good cell proliferation, SR, and mechanical properties.

• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2012

금속 주조시 사용되는 탄소이형제를 카본블랙과 점증제 겸 알데하이드 화합물의 경화제로 사용될 수 있는 수용성 고분자인 잔탄검(X-gum), 카르복시메틸셀룰로오스(CMC)을 혼합하여 제조하였다. 이 때 카본블랙의 안정한 분산을 위하여 0.25 wt%의 X-gum 또는 1.0 wt%의 CMC가 적당하였다. 1.0 wt% 보다 낮은 농도의 CMC를 사용했을 경우 카본블랙이 매우 쉽게 층분리되었다. 유리판에 대한 부착력은 경화제와, 구르탈알데하이드 및 사슬연장제인 올리고당의 양에 비례하였으며. X-gum으로 제조된 탄소 이형제는 CMC를 이용해 제조된 것보다 유리에 대한 부착력이 우수하였다. 결과적으로 본 실험의 최적 조건에서 제조된 탄소이형제는 친환경적으로 주조시에 적용할 수 있을 것으로 판단된다.

• 공업화학
• /
• 제4권1호
• /
• pp.188-195
• /
• 1993

생체의료용 재료로서 응용 가능한 고분자 전해질복합체와 그라프트 공중합체를 수용성 고분자 유도체로부터 제조하였다. 고분자 전해질 복합체들은 카르복시메틸 셀룰로오즈(CMC)와 젤라틴으로부터 제조하였다. 그라프트 공중합체는 메틸셀룰로오즈(MC)에 아크릴산을 그라프트반응시켜 합성하였고, 이 그라프트 공중합체와 젤라틴의 고분자 전해질 복합체도 제조하였다. 그라프트 공중합체와 고분자 전해질 복합체들을 화학가교법과 열처리법으로 제조시 최적조건들을 조사하였다. 예비실험 결과 이들 재료들이 생체의료용 재료로서의 응용 가능성이 있는 것을 알았다.

• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.34-39
• /
• 2017

본 실험은 방사선을 이용하여 유착방지용 Carboxymethyl cellulose sodium salt (CMC)/Porcine Cartilage Acellular Matrix (PCAM) 수화젤 필름에 대해 연구하였다. 방사선 조사시 CMC/PCAM의 농도 및 혼합비율에 따른 필름의 형태학적 구조, 젤화율, 젤강도, 팽윤도 등을 분석하였다. 방사선에 의해 가교된 CMC/PCAM 필름은 CMC 필름보다 물리적인 특성인 젤화율이 낮게 측정되었다. 또한, 가교된 CMC 필름보다는 CMC/PCAM 필름에서 인간 혈관내피세포의 부착 및 증식율이 감소하였다. 우리는 PCAM에 함유한 세포의 항부착 성분이 도입된 CMC/PCAM 필름과 CMC 필름은 세포의 접착 및 증식율을 낮추는 것을 확인하였다. 결론적으로, 본 연구에서는 방사선 가교된 CMC/PCAM 수화젤 필름은 유착방지 향상을 위한 유착방지제로서 응용이 기대된다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.229-237
• /
• 2018

Medical silicone tubes are generally used as implants for the treatment of nasolacrimal duct stenosis. However, side effects such as allergic reactions and bacterial infections have been reported following the silicone tube insertion, which cause surgical failure. These drawbacks can be overcome by modifying the silicone tube surface using a functional coating. Here, we report a biocompatible and superhydrophilic surface coating based on a polysaccharide multilayer nanofilm, which can load and release antibacterial and anti-inflammatory agents. The nanofilm is composed of carboxymethylcellulose (CMC) and chitosan (CHI), and fabricated by layer-by-layer (LbL) assembly. The LbL-assembled CMC/CHI multilayer films exhibited superhydrophilic properties, owing to the rough and porous structure obtained by a crosslinking process. The surface coated with the superhydrophilic CMC/CHI multilayer film initially exhibited antibacterial activity by preventing the adhesion of bacteria, followed by further enhanced antibacterial effects upon releasing the loaded antibacterial agent. In addition, inflammatory cytokine assays demonstrated the ability of the coating to deliver anti-inflammatory agents. The versatile nanocoating endows the surface with anti-adhesion and drug-delivery capabilities, with potential applications in the biomedical field. Therefore, we attempted to coat the nanofilm on the surface of an ophthalmic silicone tube to produce a multifunctional tube suitable for patient-specific treatment.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.397-402
• /
• 2005

To explore the potential of shell crosslinked micelle (SCM) as a drug carrier, the drug release behavior of poly($\varepsilon$-caprolactone)-b-poly(acrylic acid) (PCL-b-PAA) SCMs was investigated. PCL-b-PAA was synthesized by ring opening polymerization of $\varepsilon$-caprolactone and atom transfer radical polymerization of tert-butyl acrylate, followed by selective hydrolysis of tert-butyl ester groups to acrylic acid groups. The resulting amphiphilic polymer was used to prepare SCMs by crosslinking of PAA corona via amidation chemistry. The drug release behavior of the SCMs was studied, using pyrene as a model drug, and was compared with that of non-crosslinked micelles, especially below the critical micelle concentration (CMC). When the shell layers were crosslinked, the drug release behavior of the SCMs was successfully modulated at a controlled rate compared with that of the non-crosslinked micelles, which showed a burst release of drug within a short time.