• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1079-1084
• /
• 2004

This work describes the effect of electrode binder on the characteristics of electric double layer capacitor. Among carboxymethylcellulose (CMC), Polyvinylpyrrolidone (PVP), Polyvinyl Alcohol (PVA), and Polyvinylidene Fluoride (PVDF), the unit cell using CMC showed good rate capability at current densities between 2.5 mA/$\textrm{cm}^2$～100 mA/$\textrm{cm}^2$. However, CMC as a binder is incongruent, because the electrode bound with CMC is rigid and easy to crack during a press and winding process for fabrication of capacitor. The unit cell capacitor using the electrode bound with binary binder composed of CMC and Polytetrafluoroethylene (PTFE), especially in composition CMC : PTFE =60 : 40 wt.%, has exhibited the better mechanical properties than those of the unit cell with CMC. On the other hand, the mechanical properties of CMC+PTFE electrode, coated on underlayer composed of CMC and carbon black, were much improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1248-1253
• /
• 2004

This work describes the effect of electrode binder on the characteristics of electric double layer capacitor Among carboxymethylcellulose (CMC), Polyvinylpyrrolidone (PVP), Polyvinyl Alcohol (PVA), and Polyvinylidene Fluoride (PVDF), the unit cell using CMC showed good rate capability between $2.5mA/cm^2{\sim}100mA/cm^2$ current density. However, CMC as a binder is incongruent, because the electrode bound with CMC is rigid and easy to crack during a press and winding process for fabrication of capacitor. The unit cell capacitor using the electrode bound with binary binder composed of CMC and Polytetrafluoroethylene (PTFE), especially in composition CMC : PTFE : 60 : 40 wt.%, has exhibited the better mechanical properties than those of the unit cell with CMC. On the other hand, it was also noted that the mechanical properties of CMC+PTFE electrode, coated on underlayer composed of CMC and carbon black, were much improved the binding force.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.131-138
• /
• 2019

To improve the performance of Si anodes in advanced Li-ion batteries, the design of the electrode plays a critical role, especially due to the large volumetric expansion in the Si anode during Li insertion. In our study, we used a simple fabrication method to prepare Si-based electrodes by grafting polyacrylic acid (PAA) to a carboxymethyl cellulose (CMC) binder (CMC-g-PAA). The procedure consists of first mixing nano-sized Si and the binders (CMC and PAA), and then coating the slurry on a Cu foil. The carbon network was formed via carbonization of the binders i.e., by a simple heat treatment of the electrode. The carbon network in the electrode is mechanically and electrically robust, which leads to higher electrical conductivity and better mechanical property. This explains its long cycle performance without the addition of a conducting agent (for example, carbon). Therefore, the partially carbonized CMC-g-PAA binder presented in this study represents a new feasible approach to produce Si anodes for use in advanced Li-ion batteries.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.353-354
• /
• 2006

This work describes the effect of binders, such as carboxymethylcellulose (CMC), CMC+Polytetrafluoroethylene (PTFE) and PTFE, on the electrochemical and mechanical properties of activated carbon-electrode for electric double layer capacitor. The cell capacitors using the electrode bound with binary binder composed of CMC and PTFE, especially m composition CMC ; PTFE = 60 : 40 wt %, has exhibited the better rate capability and the lower internal resistance than those of the cell capacitor with CMC. On the other hand, the sheet type electrode kneaded with PTFE was bonded with conductive adhesive on Al foil. This cell capacitor using the electrode with PTFE exhibited the best mechanical properties and rate capability compared to the CMC and CMC+PTFE one These behaviors could be explained by the well-developed network structure of PTFE fibrils during the kneading process.

• 한국분말재료학회지
• /
• 제22권5호
• /
• pp.315-320
• /
• 2015

The present work reports a systematic study of using carboxymethylated cellulose (CMC) as water-borne binder to produce $Li_4Ti_5O_{12}$-based anodes for manufacture of high rate performance lithium ion batteries. When the LTO-to-CB-to-CMC mass ratio is carefully optimized to be 8:1:0.57, the special capacity of the resulting electrodes is $144mAh{\cdot}g^{-1}$ at 10 C and their capacity retention was 97.7% after 1000 cycles at 1 C and 98.5% after 500 cycles at 5 C, respectively. This rate performance is comparable or even better than that of the electrolytes produced using conventional, organic, polyvinylidene fluoride binder.

• 공업화학
• /
• 제26권3호
• /
• pp.306-310
• /
• 2015

본 연구에서는 광 전기화학적 물 분해 전극 재료로 이용되는 산화철($Fe_2O_3$, hematite)을 표면적을 크게 하기 위하여 DC 열플라즈마 장치를 이용하여 나노입자로 합성한 후 전극을 제조 시 binder의 종류 및 조성을 다르게 하여 염기성 전해질에서 각각의 물 분해 효율을 측정하는 실험을 진행하였으며 질소 도핑을 통해 질소가 산화철의 광전기화학 반응에 끼치는 영향을 확인하였다. 산화철 전극을 제조하여 solar simulator를 이용한 LSV 실험을 통해 각 전극의 onset potential 및 설정한 전압 범위에서의 최대 전류밀도를 측정하였으며, 전극의 내구성 평가를 위하여 LSV 실험을 반복하여 진행하였다. CMC (carboxymethyl cellulose)를 50 : 1의 비율로 섞어 binder로 이용한 산화철 전극이 가장 높은 전류밀도인 $12mA/cm^2$의 전류밀도를 나타내었고, CMC를 20 : 1 비율로 섞은 binder를 이용할 시 $3mA/cm^2$의 초기 전류밀도를 가지고 약 20회의 반복 실험을 견뎌내는 내구성을 나타내었다. 질소의 도핑이 산화철 나노입자의 광 전기 화학적 반응에 끼치는 영향은 미미한 것으로 확인되었다.

• 전기화학회지
• /
• 제22권4호
• /
• pp.155-163
• /
• 2019

우수한 수명특성을 지니는 흑연과 높은 용량을 지니고 있는 실리콘 일산화물의 혼합전극을 제조하여 리튬이온 이차전지용 음극으로 적용하여 이의 사이클 성능에 대하여 평가하였다. 천연흑연과 실리콘 일산화물을 9:1의 질량비로 혼합하여 제조한 전극은 $480mAh\;g^{-1}$의 가역용량으로 천연흑연에 비하여 33% 이상의 높은 용량을 나타내었다. 그러나, 실리콘 일산화물의 부피변화로 인하여 용량의 퇴화가 지속적으로 발생하였다. 본 연구에서는 전극 및 전해질의 구성에 변수들을 적용하여 각각의 변수가 영향을 주는 전기화학적 특성을 파악하고 이를 통하여 사이클 수명을 향상시킬 수 있는 방안을 모색하고자 하였다. 전극 제조 시에 poly(vinylidene fluoride)(PVdF) 바인더에 비하여 carboxymethyl cellulose (CMC) 바인더는 가장 우수한 사이클 특성을 나타내었으며, CMC와 styrene-butadiene rubber (SBR)을 함께 사용하는 SBR/CMC 바인더의 경우에는 CMC 단독 바인더를 사용하는 경우와 유사한 사이클 특성과 동시에 속도특성에서 장점을 지니고 있었다. 전해액 첨가제로 fluoroethylene carbonate (FEC)를 적용하는 경우에 수명특성이 크게 개선되었다. FEC의 함량이 10 질량%로 높아지게 되면 전지의 속도특성이 저하되기 때문에 5 질량%의 사용이 적절하였다. 또한 전극의 로딩값을 낮추게 되면 사이클 특성을 크게 향상시킬 수 있었으며, 집전체를 사포로 연마하여 거칠기를 증가시키는 것도 사이클 특성의 개선을 가져올 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1167-1171
• /
• 2006

This work describes the effect of binders, such as carboxymethylcellulose (CMC), CMC+ Polytetrafluoroethylene (PTFE) and PTFE, on the electrochemical and mechanical properties of activated carbon-electrode for electric double layer capacitor. The cell capacitors using the electrode bound with binary binder composed of CMC and PTFE, especially in composition CMC PTFE = 60 : 40 wt.%, has better rate capability and the lower internal resistance than those of the cell capacitor with CMC. On the other hand, the sheet type electrode kneaded with PTFE was bonded with conductive adhesive on Al foil. This cell capacitor using the electrode with PTFE exhibited the best mechanical properties and rate capability compared to the CMC and CMC+PTFE one. These behaviors could be explained by the well-developed network structure of PTFE fibrils doting the kneading process.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.63-72
• /
• 1998

This research was intended to evaluate the effect of carboxymethylcellulose(CMC) on the coating structure and surface strength of coated paper prepared with amphoteric latex based coating color. Printability and optical properties of coated papers were compared. The influence of the consolidation behavior of coating color on the coating structure and the surface strength of coated paper was investigated. Compared with the conventional anionic latex, amphoteric latex formed bulkyer, smoother and more porous coating layer, which in turn, restricted binder migration in the coating layers, and facilitated immobilization of coating colors. However, dry pick strength of coated paper was decreased. The addition of CMC to these systems had strongly influenced on. the consolidation behavior and porosity in the dry state, through forming the network structure of coating layers by the interaction with amphoteric latex particles. Thus, printability and optical properties of coated papers were improved. Results indicated that amphoteric latex could be practically applied to the paper coating to improve printability and optical properties of coated papers.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.337-341
• /
• 2007

In this paper, we studied counter electrodes that carbon materials is used for dye-sensitized solar cells. Carbon electrodes characterized by changing of CMC wt. %. We investigated a porous structure of electrodes and a specific resistance of carbon electrodes for identification of electric conductivity. The specific resistance of carton electrodes increased by an increase of CMC wt. % and this result affected an efficiency of the cells.