• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.1032-1038
• /
• 2008

This study was conducted to develope carbohydrate-based fat replacement for use in the preparation of non-(trans) fatty acid and low-caloric bread. Characteristics such as leavening height of batter, pH, titratable acidity, specific volume, sensory evaluation, shelf life and texture change of bread made using 11 types of carbohydrate-based fat replacements were measured. The 11 carbohydrate-based fat replacers (No. $1{\sim}11$) were prepared using maltodextrin as a base, and different ratios of calcium sulfate, ascorbic acid, sodium stearoyl lactylate and methyl cellulose. The pH was lowered and the total titratable acidity was increased after four hours of fermentation in the control and the samples of dough that contained the fat replacement. In addition, the leavening height of the control was 5.0cm (maximum) after two hours of fermentation and 4.6 cm after four hours of fermentation, which was similar to the heights observed when No.$9{\sim}11$ were evaluated. When the specific volume of the bread was evaluated, the 3% of fat replacement No. 10 produced the best results. When taste was evaluated, there was no significant difference between the control and the bread produced using 1% No. 10, however, there was a significant difference between the control and all samples that contained 2% or more of the fat replacement. Furthermore, the addition of a greater concentration of the fat replacer resulted in a greater moisture. However, there were no significant differences in the color of the control and any of the samples. Additionally, measurement of the firmness of the bread during four days of storage at $25^{\circ}C$ revealed that it decreased as the concentration of fat replacer increased. In addition, the sample that contained 3% of sample No. 10 showed a firmness of 18kgf after three days of storage, while the control showed a firmness of 18kg after two days, which indicates that the degradation of the bread that contained the fat replacer was delayed by one day. The bread made using fat replacers was found to have a better taste, flavor, color, texture and firmness than the control, and the best results were observed in response to the addition of 3% of replacement No. 10. The results of this study will be useful in the production of non-(trans) fatty acid, low caloric bread.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.304-311
• /
• 2010

In this study, loose RO hollow fiber membranes using CTA polymer were prepared by phase inversion method and their water purification properties were tested. 1,4-dioxane and LiCl was used as a skin layer formation agent and pore formation agent, respectively. Water flux, salt rejection, chlorine resistance, MWCO and membrane morphology were evaluated as a function of the dope composition. When the membrane prepared using the dope solution of CTA/NMP/1,4-dioxane = 18/72/10 (wt%) with air gap of 30 cm, it shows improved RO performance such as $20.5L/m^2hr$ of water flux, 60% of NaCl rejection, 10,000 ppm/hr of chlorine-resistance and around 5,000 Da of MWCO.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.995-1002
• /
• 2000

In order to Develop a low Na functional kimchi using sea tangle, the Na-binding capacity of alginate in sea tangle along with other dietary fibers was evaluated in vitro. The adding type and amount of the sea tangle that contains alginate in kimhi and characteristics of the sea tangle added kimchi were also studied. Na-binding capacity of various dietary fibers such as cellulose, pectin, gun gum, carageenan, alginates (sodium alginate, alginate, alginate from sea tangle) was measured by equilibrium dialysis method in pH 2 and pH 7 in vitro. Gua gum, carageenan and a group of alginates effectively bound to Na+ Espacially sodium alginate showed high Na-binding capacity of 29.2% in pH of stomach (pH 2.0) and 33.8% in pH of small intestine (pH 7.0), however, the alginate extracted from sea tangle could not bind Na in PH of stomach (pH 2.0), but 27.4% in pH of small intestine (pH 7.0) condition. The content of alginate in sea tangles (dried sea tangle, salted sea tangle and washed salted sea tangle) was 19.8 ~ 22.2% on dry matter basis. The sea tangle added kimchi was prepared with the addition of the flake type (0.5$\times$3 cm) of sea tangle with a quantity of 30% in kimchi from the data of the sensory analysis. The addition of the sea tangle to the kimchi increased the content of soluble dietary fiber, suggesting the Na-binding capacity increased. The sea tangle added kimchi (SK) and sea tangle and fermented anchovy added kimchi (SAK) showed higher levels of reducing sugar and acidity than the control kimchi (CK). In quantitative descriptive analysis (QDA) SK and SAK showed higher score in overall acceptance, and lower score in acidic order than CK, however, SK showed less moldy taste and more fresh acidic taste than SAK.

• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.17-22
• /
• 1982

Measurement of the radon concentration close to the ground surface can be used in search of environmental radiation for human safety, exploration for uranium, premonitory signals from earthquakes. We can detect radons in soil gas by alpha particle track method using the plastic track detectors, cellulose nitrate (LR115-Type 2 and CA80-15, Kodak $Path\'{e}$) and CR-39. For present works, radon cups having these detectors were made in our laboratory and their conversion factor was determined. A typical conversion factor was $1tr/cm^2{\cdot}30days=1.2{\times}10^{-2}pCi/l$. In the radon cups, some of $CaSO_4$ were used as desiccant for reducing the moisture effects on plastic track detectors. With these radon cups, underground radon concentrations of Kyungpook area were measured. Average radon concentration in Daegu from Jan. 1981 to Feb. 1982 was 39.7pCi/l. From Aug. 1981 to Feb. 1982, average radon concentrations of Daegu, Angang, Kyungju, Pohang, Chungha, and Andong were 31.8pCi/l, 124.5pCi/l, 127.0pCi/l, 79.1pCi/l, 144.4pCi/l, and 70.9pCi/l, respectively. The results were compared with the environmental radiation measured by TLD method.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.8-16
• /
• 2002

This study was performed to produce the high reactive lignin zero substrates from autohydrolyzed wood resources. In chemical compositions of used raw-materials, there were significant differences between two species, Japanese larch (Larix leptolepis) and oak (Quercus mongolica) woods. Japanese larch contained 25 to 3.5 times higher amounts of extractives than oak wood, which is mainly derived from high content of arabinogalactan in Japanese larch wood. Oak wood has 5% lower lignin content and 3% higher holocellulose and pentosans than larch wood. Concerned to changes in wood components during autohydrolysis pretreatment at 22 kg/cm² steaming pressure for 5~60 min, glucose content was constant during pretreatment, while hemicellulose and lignin were abruptly changed. Hemicellulose fraction was decreased significantly and lignin contents increased because of its condensation reaction with hemicellulose degradation products. The pH of hydrolyzates during pretreatment was decreased, reached upto pH 3 and since then leveled off. In the case of oak wood, same tendency was observed as in Japanese larch. Autohydrolysis followed by sodium chlorite and sulfite or bisulfite pretreatment was very effective in delignification of the substrates. In particular, two-stage delignification of autohydrolyzed woods with alkali and O₂-alkali resulted in very low lignin content substrates, such as 0~0.2% lignin substrate.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.84-96
• /
• 2007

We performed the experiments to manufacture the hydrophobic $200cells/in^2$-zeolite honeycomb using HY-type zeolite of Si/Al ratio of 80 for separating and removing the VOCs emitted from small and medium size-plants by adsorption and to determine the drying method for the honeycomb at $105^{\circ}C$ without cracking, then measured performances of the honeycomb to adsorb the benzene, o-xylene, and MEK and to desorb the benzene and MEK saturated on the honeycomb by the nitrogen gas as the desorption gas. As a results, the good honeycomb was formed and the honeycomb was not cracked when the mixing ratio of the zeolite to bentonite to methyl cellulose to polyvinyl alcohol to glycerine to water is 100 : 8.73 : 2.18 : 4.19 : 1.38 : 126 and dried the honeycomb at $105^{\circ}C$ for 24 hours in the drying oven. The shape of the dried honeycomb was not changed after calcination, and the compressive strengths of the honeycomb after drying and calcination were 6.7 and $0.69kg/cm^2$, respectively. The adsorption efficiencies of the honeycomb for benzene, o-xylene, and MEK were $92{\sim}96%$ at the room temperature. The desorption efficiency at $180^{\circ}C$ was higher than that at $150^{\circ}C\;by\;1.5{\sim}13.8%$ depending on the flow rate of the nitrogen gas, and it was found that desorption efficiency is higher than 85% at $180^{\circ}C$ and 1.0L/min of the nitrogen gas. At $180^{\circ}C$ and 0.2 L/min, the concentration of the benzene and MEK in the used desorption gas are higher than 40,000 and 50,000ppm, respectively, so it be used as the fuel for preheating the desorption gas fed into the column in desorption cycle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.111-119
• /
• 2015

A growth trial was conducted to determine the optimal incorporation level of dietary magnesium hydrogen phosphate (MHP, $MgHPO_4$), which was manufactured from swine manure and phosphorus (P), required by juvenile far eastern catfish (Silurus asotus). Graded MHP of 0.5%, 1.0%, 1.5%, and 2.0%, and 2.0% monocalcium phosphate (MCP) each was added to the basal diet (control) in lieu of cellulose to become the range of available P (AP) from 0.4% to 0.8% of which diets were designated as control, MHP0.5, MHP1.0, MHP1.5, MHP2.0, and MCP, respectively. Control diet contained fish meal (20%), soybean meal (40%), wheat flour (27%), corn gluten meal (5%), fish oil (2%) and soy oil (2%) as main ingredients. Following a 24 h fasting, 540 fish with a mean body weight of 11.8 g were randomly allotted to 6 groups in triplicate, whereby 18 tanks ($0.4{\times}0.6{\times}0.36cm$, water volume of 66 L) were prepared. The feeding experiment lasted for 8 weeks. Fish group fed the control diet showed the lowest weight gain (WG) and feed efficiency (FE) among treatments. The WG was, however, not significantly different (p>0.05) from that of fish group fed MHP0.5. Fish group fed MHP2.0 showed the highest WG and FE of which values were not significantly different from those of fish groups fed diets MHP1.0 and MHP1.5 as well as MCP (p>0.05) except fish groups fed control and MHP0.5. Aspartate aminotransferase was significantly decreased with an increase in available P, while alanine aminotransferase did not show a significant difference among treatment. The highest inorganic P in plasma was observed in fish fed MHP2.0. From the present results, a second-order regression analysis revealed that the optimal dietary MHP level and the AP requirement were found to be 1.62% and 0.7%, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.31-38
• /
• 2008

The objective of this work is to study transdermal delivery of levodopa using iontophoresis and evaluate various factors which affect the transdermal transport. Levodopa is unstable in aqueous solution, and, in order to establish a stable condition for levodopa for the duration of experiment, we investigated the stability of levodopa in aqueous solutions of different pHs with/without the addition of dextrose or the application of current. Using stable aqueous solution, we have studied the effect of pH, polarity and penetration enhancer (ethanol) on transdermal flux and compared the results. We also investigated the iontophoretic flux from hydroxypropyl cellulose (HPC) hydrogel. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell. Full thickness hairless mouse skin and rat skin were used for this work. Current densities applied were 0.4 or $0.6mA/cm^2$ and current was off after 6 hour application. Stability study showed that levodopa solution with a pH 2.5 or 4.5 maintained the initial concentration of levodopa for 24 hours with the addition of 5% dextrose. However, at pH 9.5, levodopa was unstable and 30 to 40% of levodopa degraded within 24 hours, even with the addition of 5% dextrose. Hydrogel swollen with dextrose added levodopa solution maintained about 97% of the initial concentration of levodopa for 13 days, when stored in $4^{\circ}C$. The application of current did not affect the stability of levodopa in hydrogel. Flux study from levodopa solution with pH 2.5 showed that cathodal delivery of levodopa was higher than passive or anodal delivery. When the pH of the donor solution was 4.5, anodal delivery of levodopa was higher than passive or cathodal delivery. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5, and the reverse situation applies for pH 4.5. The passive flux was unexpectedly high for the ionized levodopa. Similar to the results from aqueous solution, cumulative amount of levodopa transported trom HPC hydrogel by cathodal delivery was significantly higher than passive or anodal delivery. The treatment of 70% ethanol cotton ball by scrubbing increased passive, anodal and cathodal flux, with the largest increase for anodal flux. These results indicate that iontophoretic delivery of zwitterion such as levodopa is much complicated than that can be expected from small ionic molecules with single charge. The results also indicate that the balance between electroosmosis and electrorepulsion plays a very important role in the transport through skin.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.513-520
• /
• 2020

Here, we evaluated the functional properties of histidine-containing low-molecular-weight (LMW) peptides obtained from tuna waste meats. As with histidine-related components composed of histidine, 1-methyl histidine and anserine, histidine-containing LMW peptides exhibited high α,α-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging effect in a dose-dependent manner. Among the histidine-related dipeptides, anserine exhibited the highest reducing power followed by carnosine. By comparison with dipeptides, tuna extracts also showed similar reducing power and the activity was in a dose-dependent manner. In addition, the antioxidant activities of tuna extracts such as DPPH radical scavenging effect, reducing power, superoxide dismutase activities, and peroxide value of linoleic acid were affected by the various extraction methods.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.209-215
• /
• 1980

Proteases from papaya latex were partially purified by ammonium sulfate precipitation and separated into two fractions (Fraction I and II ) by carboxymethyl cellelose column chromatography. Each fraction, mixture of the two fractions, and crude extract of the papaya latex at pH 7.0 were inactivated at the range of $60{\sim}90^{\circ}C$ and thermal properties of the enzymes were investigated. In the thermal inactivation of fraction I, the enthalpy of activation was 89.5 kJ/mol; the entropy of activation, -44.0 J/mol K; the free energy of activation, 104.6 kJ/mol; z-value, $25^{\circ}C$. For fraction II, the enthalpy of activation was 96.5 kJ,/mol; the entropy of activation, -22.0 J/mol K; the free energy of activation, 104.0 kJ/mol; z-value, $23^{\circ}C$. For the mixture of fraction I and II, the enthalpy of activation was 90.9 kJ/mol; the entropy of activation, -38.8 J/mol·K; the free energy of activation, 104.2 kJ/mol; z-value, $24.6^{\circ}C$. For crude extract, the enthalpy of activation was 113.8 kJ/mol; the entropy of activation, 22.0 J/mol·K; the free energy of activation, 106.2 kJ/mol; z-value, $23.2^{\circ}C$. It was indicated that the fraction I was more heat-stable than the fraction II and this suggested that the thermal stability of the proteases in papaya latex is probably due to the fraction I.