• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.620-624
• /
• 2004

건설 사업은 점차 대형화 되어 가면서 건설사업의 관리의 필요성이 대두되고 있다. 국내에서는 1996년에 '건설산업기본법' 제정 시 건설사업관리가 도입되었지만, 제도의 미비 등으로 그다지 활성화되지 못하고 있다 이처럼, CM이 활성화되지 못하는 이유는 기존에 정착한 감리제도와의 마찰 때문이기도 하지만 CM의 성공적인 수행을 위한 체크리스트 의 보급과 성과측정을 통해 CM의 효과를 보급하는 과정이 미흡했기 때문이기도 하다. 국내에서도 CM이 도입된 지 10여년이 지나면서 조금씩 발전해 가고 있지만, 선진국에 비해 성과측정과 평가를 통한 활성화는 부진한 실정이다. 본 논문에서는 프로젝트 차원에서 CM분야와 요소 기술을 고려한 Best Practice 체크리스트를 개발하여 성과측정 시 보다 나은 결과를 도출하기 위한 기초를 마련하고자 한다.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.290-298
• /
• 2014

Purpose: To ascertain the increase of the farm income that predominantly relies on human resources by mechanizing Welsh onion harvesting, a tractor-mounted Welsh onion harvester was developed in this study. Method: An experiment for evaluating harvesting performance was performed for the developed Welsh onion harvester in an actual Welsh onion farm. The harvest performance was evaluated at the tractor running speeds of 5.0 cm/s, 11.4 cm/s and 15.8 cm/s, by comparing the operating efficiency, harvest rate, and damage rate of the Welsh onion harvester. Results: The performance of the harvester was rated as very good, with a 100% harvest rate, regardless of tractor running speed. Furthermore, it is shown that work efficiency of the harvester is expected to increase as the running speed increases. Nonetheless, the damage rate of the harvested Welsh onions at running speeds 5.0 cm/s, 11.4 cm/s, and 15.8 cm/s, increased correspondingly and proportionally to speeds from 4.55% to 6.53% and to 11.29%. The residual amount of soil on the harvested Welsh onions was about 0.24% of their weight showing excellent soil-removal performance of the harvester. Conclusion: The developed Welsh onion harvester is believed to improve the labor productivity and cultivation environment of Welsh onion farmhouses by the mechanization of the harvesting process that is currently associated with the largest amount of labor hours.

• 경영과학
• /
• 제18권1호
• /
• pp.89-105
• /
• 2001

The performance of Cellular Manufacturing (CM) systems has been rigorously investigated during the last two decades, but the extent of empirical research on CM is limited. A major objective of this study is to examine the relationship between critical success factors, employees' implementation attitudes and performance of CM systems. Two hypothesis were formulated &d Tested: (1) The impact of critical success factors on performance and to what extent does certain critical success factors correlate with performance\ulcorner (2) How does the relationship between critical success factors and performance differ by employees' implementation attitudes\ulcorner Results from the study provide partial support for relationship between critical success factors (infrastructure, organizational immersion, autonomous management) and performance. The results also show that differences in performance of organizations grouped by degree of employees' attitudes could be found.

• Journal of Animal Science and Technology
• /
• 제59권7호
• /
• pp.19.1-19.10
• /
• 2017

Background: To reduce use of main feed ingredient like corn, soy bean meal (SBM) and wheat, alternative ingredients has been studied like copra meal (CM). Production amount of CM which has been high makes CM to be an alternative feed stuff. However, low digestibility on AA and low energy content by high fiber content can be an obstacle for using CM. This experiment was conducted to evaluate the effects of CM supplementation with ${\beta}$-mannanase on growth performance, blood profile, nutrient digestibility, pork quality and economic analysis in growing-finishing pigs. Methods: A total of 100 growing pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) averaging $31.22{\pm}2.04kg$ body weight were allotted to 5 different treatments by weight and sex in a randomized complete block (RCB) design in 5 replicate with 4 pigs per pen. Treatments were 1) Control (corn-SBM based diet + 0.1% of ${\beta}$-mannanase (800 IU)), 2) CM10 (10% copra meal + 0.1% ${\beta}$-mannanase (800 IU)), 3) CM15 (15% copra meal + 0.1% ${\beta}$-mannanase (800 IU)), 4) CM20 (20% copra meal + 0.1% ${\beta}$-mannanase (800 IU)) and 5) CM25 (25% copra meal + 0.1% ${\beta}$-mannanase (800 IU)). Four phase feeding program was used: growing I (week 1-3), growing II (week 4-6), finishing I (week 7-9) and finishing II (week 10-12). Results: In growth performance, there was no significant difference among treatments during whole experimental period. In growingI phase, G:F ratio tended to increase when CM was increased (P = 0.05), but ADG and ADFI tended to decrease in finishingII phase (linear, P = 0.08). Also, increasing CM reduced ADG (linear, P = 0.02) and feed efficiency (linear, P = 0.08) during the whole finishing period. In blood profiles, BUN was linearly increased as CM increased (linear, P = 0.02) at growingII period. In digestibility trial, there was no significant difference in dry matter, crude fat, crude ash and nitrogen digestibility. However, crude protein digestibility was decreased linearly (linear, P = 0.02). In economic analysis, feed cost per weight gain and total feed cost per pig were reduced in overall period when CM was provided by 25% (linear, P = 0.02). Conclusion: CM with 0.1% of ${\beta}$-mannanase (800 IU) could be supplemented instead of corn and SBM up to 25% without detrimental effects on growth performance and pork quality of growing-finishing pigs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.269-274
• /
• 1998

In this study, to increase fluidity and resistance of segregation of materials, the effect of each of the materials, which have effects on high performance concrete from investigating the properties of strength and drying shrinkage of high performance concrete made by the basic mix proportion used fly-ash and ground granulated blast-furnace slag after hardening, has been checked. According to the experimental results, fluidity on W/C = 34% was satisfied within slump-flow 65$\pm$ 5cm and U-type self-compactability difference 5cm. On the properties of strength, high performance concrete produced compressive strength over 400kg/$\textrm{cm}^2$ in 28days when powder was replaced by 40% of fly-ash and 60% of ground granulated blast-furnace slag. And compressive strength was taken over 600kg/$\textrm{cm}^2$ equal to non-replacement in 91days. Also, the length change of concrete with the addition of fly-ash was smaller than that without it. Therefore, it may be effective on the decrease of drying shrinkage volume.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.275-280
• /
• 1998

In this study, to increase fluidity and resistance of segregation of materials, the effect of each of the materials, which have effects on high performance concrete from investigating the properties of strength and drying shrinkage of high performance concrete made by the basic mix proportion used fly-ash and ground granulated blast-furnace slag after hardening, has been checked. By the results of this experiment, fluidity on W/C=34% was satisfied within slump-flow 65$\pm$5cm and U-type self-compacting difference 5cm. On the properties of strength, high performance concrete produced compressive strength over 400kg/$\textrm{cm}^2$ in 28days when powder was replaced by 40% of fly-ash and 60% of ground granulated blast-furnace slag. And compressive strength was taken over 600kg/$\textrm{cm}^2$ equal to non-replacement in 91days. Also, the length change of concrete with the addition of fly-ash was smaller than that without it. Therefore, it may be effective on the decrease of drying shrinkage volume.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권10호
• /
• pp.1457-1463
• /
• 2005

In this research, the possibilities of using canola meal (CM) in place of soybean meal (SBM), and also the effects of multi-enzyme and phytase supplementation on the performance of quails were investigated. For this purpose, soybean meal (44% CP), canola meal (37% CP), phytase (produced from Peniophora luci) and multi-enzyme ($\beta$-glucanases, pectinases, cellulases and hemicellulases) were used. CM was used supplying 0, 25 and 50% of CP from SBM and each of the phytase and multi-enzyme blends were added to the each level. This study was conducted with 675 day old quails (Coturnix coturnix Japonica) in 9 groups with 3 replicates including 25 birds (mixed sex) per replicate. Nine isocalaric and isonitrogenous diets were prepared. The effects of enzymes and CM levels were studied with a 3${\times}$3${\times}$3 factorial arrangement for three CM levels (0, 25 and 50%), three treatments (without enzyme, phytase enzyme and multi-enzyme) and three replicates. While the 25% CM level did not affect the liveweight gain 50% CM level decreased the liveweight gain (p<0.05). Multi-enzyme addition to the 50% CM group increased the liveweight gain compared to the other groups (p<0.05). CM levels and enzyme supplementation had no effect on feed consumption, feed conversion ratio, dressing percentage, viability, tibia ash content, Ca and P contents of tibia ash, viscera weight, gizzard weight and length of growth period. While heart weight and liver weight were not affected by CM levels, but they were affected by enzyme supplementation. CM levels and enzyme supplementation did not affect final liveweight, feed consumption, feed conversion ratio, egg yield, egg weight, shell weight and shell index during laying period. The increase in the CM level lightened the colour of the yolk (p<0.05).

• 콘크리트학회지
• /
• 제10권4호
• /
• pp.93-100
• /
• 1998

본 논문은 고성능 철근콘크리트 보의 휨강성, 소성힌지 길이 및 소성힌지의 회전능력에 관한 연구이다. 실험은 철근비, 콘크리트 강도 및 하중 재하형태(1점가력과 2점가력)를 변수로 하여 총 15개의 철근콘크리트 단순보에 대하여 행하여 졌다. 콘크리트의 실린더 압축강도가 700kg/${cm}^2$, 슬럼프 20~25 cm 및 슬럼프 플로우가 60~70cm인 고성능 철근콘크리트 및 보통 강도 철근콘크리트 단순보의 휨실험결과, 본 실험의 경우에 고성능 철근콘크리트 보의 극한 곡률을 구할 때는 ${\varepsilon}_{cu}=0.0047$의 값을 사용할 수 있는 것으로 나타났다. 고성능 철근콘크리트 단순보의 휨강성을 평가하기 위해 유효단면 2차 모멘트를 구하는 식과 고성능콘크리트 단순보에 2점 하중을 가하는 경우 등가 소성힌지 길이를 구하는 식이 본 실험의 경우에 대해서 제시되었다. 극한 모멘트 상태에서 이러한 식을 사용하여 구한 처짐값은 실험값과 비교적 일치하게 나타났다.

• 한국디지털건축인테리어학회논문집
• /
• 제10권2호
• /
• pp.39-47
• /
• 2010

In this study, there should be a debation on the methods, such as considerations on the CM organization of skyscraper project for the client's side, process and impact factors need to be taken, and suggesting the evaluation and selection criteria, which may lead strategic decision-making by the client. Owner of the CM organizational decision to establish a variety of alternatives, the range of CM performance characteristics of the project, considering the weight and also by evaluating the effectiveness of appropriate alternative is selected. Domestic skyscraper project, decisions about the CM organization for 'S Tower' prior to the proposed decision and the criteria was applied. As a result, domestic CM/PM companies and overseas CM/PM companies were doing business as J/V, Supervision of the integration work order types showed the highest performance levels. when they ordered CM services. The project cost reduced and organizational improvements, the results of applying alternative way, improve on-site construction plans, sharing key technologies, process improvement plan could benefit from such expectations.

• 농업생명과학연구
• /
• 제46권1호
• /
• pp.53-61
• /
• 2012

본 연구는 우리나라의 대표적인 조림수종인 참나무류의 건전하고 효율적인 묘목생산을 위한 적정 단근길이와 이식밀도를 구명하고자 실시하였다. 상수리나무와 졸참나무의 단근길이별 묘목생장에서 5 cm로 단근된 묘목은 10 cm 및 15 cm로 단근된 묘목보다 저조한 지상부 및 뿌리생장을 나타내었고, 10 cm로 단근된 묘목은 15 cm로 단근된 묘목과 유사한 생장을 나타내었다. 이식밀도별 묘목생장에서는 64본/$m^2$ 이하의 이식밀도 처리구가 81본/$m^2$ 이상의 이식밀도 처리구보다 우수한 생장을 나타내었다. 따라서 묘목의 우수한 생장과 이식작업의 효율성 등을 고려할 때, 상수리나무와 졸참나무 1-0묘의 이식은 주근을 10 cm로 단근하여 64본/$m^2$의 밀도로 이식하는 것이 가장 적합할 것으로 생각된다. 이러한 본 연구결과는 상수리나무와 졸참나무의 양묘 시 우수한 생장을 나타내는 묘목을 생산하고, 두 수종의 초기 이식생장을 이해하는 기초자료로서 이용될 수 있을 것이다.