• 한국안전학회지
• /
• 제17권2호
• /
• pp.16-21
• /
• 2002

At present the Polyethylene piping, on supporting LNG is widely used because of it's disposition which are anti-corrosion flexible and so on. However, it has a few kinds of risk which are the possibility of piping leak, the character of easily corroded and so on. For giving solution, this study is intended to experiment the intension of the PE pipe after melted and when it is melting, the condition which are temperature and pressure is changed. the melting condition in temperature and pressure is adapted identically. After melting, it's joint is tested as intension. The result is that the effect of temperature in intension is more effective than pressure. In $210^{\circ}C$, $20kg/cm^{2}$ condition, the melting intension has the highest. Compare to the Butt melting joint and the Saddle melting joint, the former was $214kg/cm^{2}$ and the latter was $50kg/cm^{2}(bead\;2{\sim}3mm)$ and $73kg/cm^{2}(bead\;5{\sim}7mm)$. It means that the Butt melting method has more intensive than saddle. Consequently, the result shows that the liability and safety when pipe melting method is used will improve in pipe installation.

• 대한수의학회지
• /
• 제33권1호
• /
• pp.151-169
• /
• 1993

The present study was carried out to investigate the best condition for nuclear-cytoplasm fusion and in vitro culture of nuclear transplanted embryos and to investigate the production of nuclear transplanted offsprings. The nuclei from 2-, 4- and 8-cell mouse embryos were transferred into enucleated 2-cell embryos, and the reconstituted embryos were submitted to direct current(DC) pulses at output voltage of 1.0, 1.5 and 2.0 kV/cm for 100, 150 and $200{\mu}$ sec to induce cell fusion. 1. The culture of intact or zona cut 2-cell embryos in the medium supplemented with cytochalasin B($5{\mu}g/m{\ell}$) and colcemide($0.1{\mu}g/m{\ell}$)for 30 and 60 minutes did not affect the development to later stage. 2. The in vitro developmental rates of group A(a nucleus from one of the blastomeres was removed) and B(electrofusion of group A) were significantly lower than that of control group(p<0.01). 3. When nuclear transplanted embryos were submitted to electrofusion, the significantly higher fusion rates of 2-cell donor nuclei were achieved at the electric field strength of DC 1.5kV/cm for 100 and $150{\mu}$ sec, DC 2.0 kV/cm for $100{\sim}200{\mu}$ sec than DC 1.0 kV/cm for 100 and $150{\mu}$ sec(p<0.01). The significantly higher fusion rates of 4-cell donor nuclei were achieved at DC 2.0 kV/cm for 100 and $150{\mu}$ sec than DC 1.0kV/cm for $100{\sim}200{\mu}$ sec(p<0.01). These fusion rates in 8-cell donor nuclei were 88.7~99.3%. 4. The developmental potency to blastocyst in 2- and 4-cell donor nuclei was significantly higher in DC 1.0 and 2.0 kV/cm for $100{\sim}200{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group (p<0.01). The developmental potency to blastocyst in 8-cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}$ sec treated group than in DC 1.0 kV/cm for $100{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group(p<001). 5. The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 6. The success rate of nuclear injection into enucleated 2-cell embryos was significantly higher in 2-cell donor nuclei than in 4- or 8-cell donor nuclei(p<0.01). 7. The culture time taken for the nuclear transplanted 2-cell embryos to blastocyst stage was significantly longer in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 8. There was no significant difference in the developmental potency of nuclear transplanted embryos within the concentration of EGF at 0 to 15 ng per $m{\ell}$ of BMOC-3 solution. 9. The production rates of offspring after transfer of nuclear transplanted embryos to recipient mouse were significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01).

• 한국수정란이식학회지
• /
• 제10권2호
• /
• pp.105-113
• /
• 1995

This study was conducted to examine the efficiency of enucleation and blastomere isolation from recipient oocytes and donor embryos, respectively and to determine the effect of oocyte age and electric voltage on the fusion rate and in vitro development of the fused oocytes in rabbit nuclear transplantation. Immature oocytes collected from ovarian follicles were matured in vivo for 12 h in TCM-199 containing FCS and hormones and in vivo matured oocytes were collected 17 to 18 h post-HCG. The fresh and frozen donor embryos of 8- to 16-cell stage were collected from the oviduct of superovulated does. The proportion of successfully enucleated oocytes was greatly lower in in vitro matured oocytes (42.3%) than that (62.7%) in in vivo matured oocytes The level of cytochalasin B for in vivo matured oocytes did not affect the efficiency of enuleation, but 7.5 $\mu$g /mL cytochalasin B for in vitro matured oocytes showed a high enucleation rate significantly. The isolation efficiency of a single blastomere nucleus did not differ between 8- and 16-cell stage embryos. The percentage of single blastomeres isolated from 16-cell stage fresh embryos after 0.5% pronase treatment was greatly higher at 16-min treatment (94.4%) than at 8-min(78. 1%) and the blastomeres(61.5%) isolated from frozen-thawed embryos after 16-min pronase were significantly fewer than those of fresh embryos. The age of recipient oocytes affected nuclear fusion rate. The reconstituted oocytes fused at 24-h age showed slightly higher fusion rate (77.8%) than those (65.0%)fused at 18-h age. The fusion rate of in vitro and in vivo matured oocytes inserted with fresh blastomere did not differ among electric voltages, but the cleavage rate and development to morula-blastocysts of in vitro matured oocytes was more higher under 0.6 kV/cm than under 0.8 to 1.2 kV/cm, while the cleavage rate and development of in vivo matured oocytes was higher under 0.8 to 1.0 kV/cm than under 1.2 kV/cm. The fusion and cleavage rate fol1owing insertion with frozen-thawed blastomere was not different between the in vitro and in vivo matured oocytes and was similar to those from fresh blastomere insertion.

• Journal of Korean Neurosurgical Society
• /
• 제50권5호
• /
• pp.441-445
• /
• 2011

Objective : There are technical limitations of multi-level posterior pedicle screw fixation performed by the percutaneous technique. The purpose of this study was to describe the surgical technique and outcome of minimally invasive multi-level posterior lumbar interbody fusion (PLIF) and to determine its efficacy. Methods : Forty-two patients who underwent mini-open PLIF using the percutaneous screw fixation system were studied. The mean age of the patients was 59.1 (range, 23 to 78 years). Two levels were involved in 32 cases and three levels in 10 cases. The clinical outcome was assessed using the visual analog scale (VAS) and Low Back Outcome Score (LBOS). Achievement of radiological fusion, intra-operative blood loss, the midline surgical scar and procedure related complications were also analyzed. Results : The mean follow-up period was 25.3 months. The mean LBOS prior to surgery was 34.5, which was improved to 49.1 at the final follow up. The mean pain score (VAS) prior to surgery was 7.5 and it was decreased to 2.9 at the last follow up. The mean estimated blood loss was 238 mL (140-350) for the two level procedures and 387 mL (278-458) for three levels. The midline surgical scar was 6.27 cm for two levels and 8.25 cm for three level procedures. Complications included two cases of asymptomatic medial penetration of the pedicle border. However, there were no signs of neurological deterioration or fusion failure. Conclusion : Multi-level, minimally invasive PLIF can be performed effectively using the percutaneous transpedicular screw fixation system. It can be an alternative to the traditional open procedures.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 1994

Electrofusion of cabbage protoplasts was performed with a developed equipment which consists of a parallel wire electrode, a AC field generator, and a pulse generator. Exposure of protoplasts to an alternating current field of 450 KHz causes attraction to each other which leads to chains of protoplasts extending from the electrode. Intra-specific protoplast fusion was effectively induced within the pearl chains by the additional application of a single high-intensity DC square wave pulse of 1 KV/cm for 1-3 msec. To improve the performance, micro fusion electrode fabricated from the semiconductor technology and microcontroller based field an, d pulse generator was proposed. The viability of protoplasts after an application of electric field at optimum condition was reduced by only 5 % compared with that of pre-application. A prototype of fusion electrode, which consists of insulator-structure, was successfully fabricated by using photosensitive polyimide.

• 생명과학회지
• /
• 제7권4호
• /
• pp.282-288
• /
• 1997

To obtain a basic information on the development of Genus Viola, ultrastructure and electrofusion process between the two protoplasts from wild Viola callus cells and pansy mesophyll cells were observed with a scanning electron microscopy(SEM) and transmission electron microscopy(TEM). In the ultrastructural observation of wild viola callus protoplasts and pansy mesophyll protoplasts using SEM, their cell walls were removed completely. A knob-like formation was observed on the enlarge surface of viola callus protoplasts. On the surface of pansy mesophyll protoplasts net-like chloroplasts were observed. In SEM observation of pansy mesophyll protoplasts, chloroplasts devoid of membrane were observed on the surface the protoplasts. Pearl chain was formed by applying AC field of 200 V/cm at 1.0 MHz for 43 sec. The lysis of plasma membranes and fusion process occurred by applying a 1,600 V/cm DC pulse twice for 1 sec. After 1-2 hours of a DC pulse application, it was observed that the two protoplasts were fused completely into one cell. In TEM observation of the fused cell, many small vacuoles were located in the fusion area of the two protoplasts. Indeed, two distinct regions were observed during fusing process; in one region, a nucleus was found, while in the other region, both nucleus and nucleous were found.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.719-720
• /
• 2004

A multi-megawatt long pulse ion source (LPIS) of neutral beam injector was developed for the KSTAR. Beam extraction experiments of the LPIS were carried out at the neutral beam test stand (NBTS). Design requirements for the ion source were 120 kV/65 A deuterium beam and a 300 s pulse length. A maximum ion density of $9.1310^{11}$ $cm^{-3}$ was measured by using electric probes, and an optimum arc efficiency of 0.46 A/kW was estimated with ion saturation current of the probes, arc power, and total beam area. An arcing problem, caused by the structural defect of decelerating grid supporter, in the third gap was solved by the blocking of backstream ion particles, originated from the plasma in the neutralizer duct, through the unnecessary spaces on the side of grid supporter. A maximum drain power of 1.5 MW (i.e. 70 kV/21 A) with hydrogen was measured for a pulse duration of 0.5 s. Optimum beam perveance was ranged from 0.75 to 0.85. An improved design of accelerator for the effective control of beam particle trajectory should provide higher beam perveance.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.70-77
• /
• 2024

A low energy ion irradiation system based on the deuterium arc ion source with a high perveance of 1 µP for a single extraction aperture has been successfully developed for the investigation of ion irradiation on plasma-facing components including the first mirror of plasma optical diagnostics system. Under the optimum operating condition for mirror testing, the ion source has a beam energy of 200 eV and a current density of 3.7 mA/cm². The ion source comprises a magnetic cusp-type plasma source, an extraction system, a target system with a Faraday cup, and a power supply control system to ensure stable long time operation. Operation parameters of plasma source such as pressure, filament current, and arc power with D₂ discharge gas were optimized for beam extraction by measuring plasma parameters with a Langmuir probe. The diode electrode extraction system was designed by IGUN simulation to optimize for 1 µP perveance. It was successfully demonstrated that the ion beam current of ~4 mA can be extracted through the 10 mm aperture from the developed ion source. The target system with the Faraday cup is also developed to measure the beam current. With the assistance of the power control system, ion beams are extracted while maintaining a consistent arc power for more than 10 min of continuous operation.

• Journal of Korean Neurosurgical Society
• /
• 제59권6호
• /
• pp.615-621
• /
• 2016

Objectives : To review surgical results of post-fusion lumbar flatback treated with pedicle subtraction osteotomy (PSO) or Smith-Petersen osteotomies (SPOs). Methods : Twenty-eight patients underwent osteotomies. Radiological outcomes by sagittal vertical axis (SVA), and pelvic tilt (PT), T1 pelvic angle (T1PA), and pelvic incidence (PI)-lumbar lordosis (LL) at preoperative, postoperative 1 month, and final were evaluated. Oswestry Disability Index (ODI), visual analog scale (VAS) score of back pain/leg pain, and Scoliosis Research Society-22 score (SRS-22r) were analyzed and compared. Patients were divided into 2 groups (SVA ${\leq}5cm$ : normal, SVA >5 cm : positive) at final and compared outcomes. Results : Nineteen patients (68%) had PSO and the other 9 patients had SPOs with anterior lumbar interbody fusions (ALIFs) (Mean age : 65 years, follow-up : 31 months). The PT, PI-LL, SVA, T1PA were significantly improved at 1 month and at final (p<0.01). VAS score, ODI, and SRS-22r were also significantly improved at the final (p<0.01). 23 patients were restored with normal SVA and the rest 5 patients demonstrated to positive SVA. SVA and T1PA at 1 month and SVA, PI-LL, and T1PA at final were significantly different (p<0.05) while the ODI, VAS, and SRS-22r did not differ significantly between the groups (p>0.05). Common reoperations were early 4 proximal junctional failures (14%) and late four rod fractures. Conclusion : Our results demonstrate that PSO and SPOs with ALIFs at the lower lumbar are significantly improves sagittal balance. For maintenance of normal SVA, PI-LL might be made negative value and T1PA might be less than $11^{\circ}$ even though positive SVA group was also significantly improved clinical outcomes.

• 미생물학회지
• /
• 제36권4호
• /
• pp.259-266
• /
• 2000

아닐린분해능이 있는 Flavimonas oryzihabitans과 4-chlorobiphenyl (4-CBP)를 분해하는 Pseudomonas sp.를 원형질체 융합하여 아닐린과 4-CBP를 모두 분해하는 융합균주를 개발하고, 융합체의 특성을 조사하였다. F. oryzibhavitans는 융합체 선별표지 위애 NTG처리하여 chloramphenicol 내성 ($Cm^r$)을 유발하였다. Lysozyme-EDTA에 의한 각 모균주의 원형질체 생성율은 약 99%이었고, 원형질체의 재생율은 5.0~6.6%이었다. 원형질체는 40% PEG 6000을 사용하였을 때 효과적으로 융합이 이루어졌으며 융합율은 $3.16{\times}10^{-4} $이었다. 융합균인 F22의 DNA양는 모균주에 비해 약 2배 정도 증가 하였으며, 생화학적 특성은 모균주의 특성이 혼합하여 나타났다. F22는 5 mM 아닐린 최소배지에서는 모균주와 성장능과 분해능이 거의 비슷하였고, 10 mM 아닐린 최소배지에서는 1.5배 빠른 성장속도를 나타내었으나, 4-CBP 분해능은 모균주보다 약간 낮게 나타났다.