• 공업화학
• /
• 제28권3호
• /
• pp.345-350
• /
• 2017

원자력연료 제조공정에서 생산되는 우라늄산화물(uranium oxide, UOX) 소결체의 밀도 분석은 일반적으로 소결공정을 거친 후, 소결체의 표본을 가지고 측정한다. 본 연구에서는 우라늄산화물의 중간물질인 중우라늄산암모늄(ammonium diuranate)의 색도를 분광기(spectrophotometer)로 측정함으로써 소결공정 이전에 우라늄산화물 소결체의 밀도를 분석해 보았다. 중우라늄산암모늄 표준 샘플 5개를 통해 얻은 명도 및 색의 좌푯(L, a, b)값과 통상적인 방법으로 얻은 소결체 밀도의 상관관계 추세선을 바탕으로 표적 샘플의 밀도를 분석한 결과, L 값에 대한 소결체의 밀도 분석이 결정계수 $R^2$ 값 0.9967로 가장 신뢰성이 높게 나왔음을 확인하였다. a 값에 대한 결정계수 $R^2$ 값은 0.9534로 상관관계가 높은 편이나 L 값보다는 낮았다. 이에 반해 b 값에 대한 결정계수 $R^2$ 값은 0.4349로 상관관계가 거의 없었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.267-267
• /
• 2017

In Korea, the average air temperature has been elevated twice faster than the average global warming. And the climate warming is characterized by the smaller rise of air temperature in summer and the greater rise of air temperature in spring and winter. Therefore, the number of frost-free days to determine the cultivation ability of crops has increased by more than 15 days in 10 years according to climate warming. This climate warming trend has extended and is projected to extend not only the sweet potato growing season but also the sweet potato early cultivating area to higher altitude and latitude region. This study was carried out to evaluate the possibility of sweet potato double cropping in the southern island area of Korea by assessing the growth and yield performance of sweet potato cultivated at extremely-early and -late time. We had performed at Yokji Island Yokji Island($E128^{\circ}$ 18' $N34^{\circ}$ 36'), a representative specified complex area of sweet potato cultivation in southern Korea. As the test varieties, the major cultivars of the this region, Shinyulmi and early hypertrophic cultivars, Dahomi were used. The prior cropping were planted with PE film mulching on March 30 and April 10, and harvested after 110 days. So the succeeding cropping were planted without PE film mulching on July 25 and August 5 according to the harvesting time of the prior sweet potato and harvested after 120 days. As a control, it was harvested on September 15, 120 days after planted on May 15. Each experimental plot had an area of 12 square meters consisting of 4 beds, and was planted one at a time at intervals of 25cm. We had investigated growth characteristics - main vine length, node number, branch number, total vine yield, and tuberous root characteristics - tuberous root number, average weight, starch value, and etc. After harvesting, we analyzed the economic effects by examining the postharvest quantity, the input labor, the management cost, and the income. The total yield of marketable products in prior and succeeding cropping was 46~70% higher than that of control. The average unit price of sweet potato was 36% higher than the conventional culture, and the gross income increased by 98%, but the operating cost increased by 83%, and the farm income increased by 103%. There are considerations such as the difficulty of enlargement of cultivation area due to lack of labor in limited space and the need for watering measures due to spring drought. However, if the area of application for sweet potatoes double system is increased by 10%, it can be used as a new cropping system.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.280-280
• /
• 2017

In Korea, the average air temperature has been elevated twice faster than the average global warming. And the climate warming is characterized by the smaller rise of air temperature in summer and the greater rise of air temperature in spring and winter. Therefore, the number of frost-free days to determine the cultivation ability of crops has increased by more than 15 days in 10 years according to climate warming. This climate warming trend has extended and is projected to extend not only the sweet potato growing season but also the sweet potato early cultivating area to higher altitude and latitude region. This study was carried out to evaluate the possibility of sweet potato double cropping in the southern island area of Korea by assessing the growth and yield performance of sweet potato cultivated at extremely-early and -late time. We had performed at Yokji Island Yokji Island($E128^{\circ}$ 18' $N34^{\circ}$ 36'), a representative specified complex area of sweet potato cultivation in southern Korea. As the test varieties, the major cultivars of the this region, Shinyulmi and early hypertrophic cultivars, Dahomi were used. The prior cropping were planted with PE film mulching on March 30 and April 10, and harvested after 110 days. So the succeeding cropping were planted without PE film mulching on July 25 and August 5 according to the harvesting time of the prior sweet potato and harvested after 120 days. As a control, it was harvested on September 15, 120 days after planted on May 15. Each experimental plot had an area of 12 square meters consisting of 4 beds, and was planted one at a time at intervals of 25cm. We had investigated growth characteristics - main vine length, node number, branch number, total vine yield, and tuberous root characteristics - tuberous root number, average weight, starch value, and etc. After harvesting, we analyzed the economic effects by examining the postharvest quantity, the input labor, the management cost, and the income. The total yield of marketable products in prior and succeeding cropping was 46~70% higher than that of control. The average unit price of sweet potato was 36% higher than the conventional culture, and the gross income increased by 98%, but the operating cost increased by 83%, and the farm income increased by 103%. There are considerations such as the difficulty of enlargement of cultivation area due to lack of labor in limited space and the need for watering measures due to spring drought. However, if the area of application for sweet potatoes double system is increased by 10%, it can be used as a new cropping system.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.111-117
• /
• 2000

In this study, the bearing capacity behavior of strip footing located above a continuous cavity in sand was investigated experimentally. The model footing test was performed in a model box made by using raining method in sand. The model footing test results were compared with those obtained from theoretically proposed equations. The results of the analysis indicate that there is a critical region under the footing. For strip footing, there exists a critical depth below which the presence of the cavity has negligible influence on the footing performance. Only when the cavity is located within this region will the footing performance be significantly affected by the presence of the cavity. The size of the critical region depends on several factors such as footing shape, soil property, cavity size and cavity shape. When the cavity is located within the critical region, the bearing capacity of the footing varies with various factors, such as the size and location of the cavity and the depth of foundation. Based on the experimental study, the following conclusions were induced. 1. The ultimate bearing capacity due to the eccentricity of a underground cavity increases at the rate of the small rather than that due to the depth of a underground cavity. This indicates that the bearing capacity of a strip footing is influenced on the depth rather than the eccentricity of a underground cavity. 2. The critical $depth(D/B)_{cr}$, by underground cavity in sand soil ground that is made by the relative density($D_r$)=55%, 65%, 75%, approaches a range of about 8~10 in case of W/B=1, and about 11~13 in case of W/B=2. 3. In case of the relative density($D_r$) 75%, the most outstanding differential settlement trend is shown in the depth of 4~8cm regardless of the size of cavity, namely, when the value of D/B is 1~2. Therefore, a underground cavity influences on not only the decrease of the bearing capacity but also the differential settlement of a strip footing.

• Ocean and Polar Research
• /
• 제25권3호
• /
• pp.277-286
• /
• 2003

Nitrification performance of fixed film biofilters using coarse sand, loess bead, or styrofoam beads in biofilter columns 1 meter high and 30cm in diameter were studied at different hydraulic and organic matter loading rates. Synthetic wastewater was supplied to the culture tank in order to maintain desired TAN concentrations in inlet water to biofilters. All the biofilters were conditioned 5 months before start of sampling. TAN and $NO_2-N$ conversion rates increased with an increase in the hydraulic loading rate (HLR). However, the improvement in biofilter performance was not linearly correlated to HLR in styrofoam bead filters. This is mainly due to the characteristics of the styrofoam beads used. TAN conversion rates of sand filters increased with the increase of HLR up to $200m^3/m^2$. per day. No increase in the TAN conversion rate was observed at the highest HLR since flooding on the media surface took place. HLR had a significant impact on the TAN conversion rates in loess bead filter up to the highest HLR tested (P<0.05). TAN conversion rates were much less at organic matter loading rates of 9 and 18kg $O_2/m^3$ per day than those without the addition of organic matter in styrofoam bead filters. The addition of glucose resulted in a reduction of the TAN conversion rate from 540 to 284g $TAN/m^3$ per day. No significant difference of TAN conversion rates between the two organic matter loading rates was found (p<0.05). This indicates that the impact of organic matter on nitrification becomes less and less sensitive with an increase in the COD/TAN ratio. At an organic matter loading rate of 9kg $O_2/m^3$. per day, a great reduction of TAN conversion rates was observed in sand filters and loess bead filters. Clearly, organic matter can be one of the most Important Impacting factors on nitrification. $NO_2-N$ conversion rates showed a similar trend for TAN. Based on the TAN and nitrite conversion rates, styrofoam beads showed the best performance among the three filter media tested. Also, the low gravity and price of styrofoam beads make the handling easier and more cost-effective for commercial application. The results obtained at the highest organic matter loading rates can be used in the biofilter design in recirculating aquaculture system.

• 한국환경생태학회지
• /
• 제30권2호
• /
• pp.228-242
• /
• 2016

본 연구는 모밀잣밤나무 등이 분포하여 식생학적 가치가 높은 비진도 상록활엽수림의 식물군집구조 특성을 파악하고자 진행하였다. TWINSPAN과 DCA에 의한 군락분류 결과, 모밀잣밤나무군락, 모밀잣밤나무-곰솔군락, 참식나무-동백나무군락, 굴피나무군락, 졸참나무-낙엽활엽수군락, 사방오리나무군락, 곰솔군락으로 구분되었다. 상록활엽수림은 교목층과 아교목층에서 모밀잣밤나무, 참식나무, 동백나무의 세력이 우세하여 인위적인 간섭에 의한 교란이 없다면 당분간 현상태를 유지할 것이다. 굴피나무군락은 상록활엽수인 참식나무에 의해, 졸참나무-낙엽활엽수군락은 상호경쟁에 의해 식생의 변화가 예상되었다. 난대림의 일반적인 천이경향은 곰솔, 낙엽활엽수를 거쳐 후박나무, 구실잣밤나무, 참식나무 등 상록활엽수림으로 진행되는 것을 예측하고 있는 바, 비진도의 곰솔, 낙엽활엽수 우점지역도 장기적으로 이들 수종으로 천이가 진행될 것이다. 종다양도는 곰솔자연림군락(1.2739), 졸참나무-낙엽활엽수군락(1.2325), 낙엽활엽수군락(1.1807), 사방오리나무군락(1.0854)이 높은 반면에, 상록활엽수가 우점하는 모밀잣밤나무군락, 참식나무-동백나무군락, 곰솔 산불피해지 군락은 0.7380~0.8416으로 낮았다. 토양산도(pH)는 4.72~6.33, 전기전도도는 34.5~127.9uS/cm, 유기물함량은 3.4~17.4%이었다.

• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.131-140
• /
• 2013

여성복에 있어서 09/10년 시즌에 가장 주목할 만한 특징은 파워 숄더 룩이다. 파워 숄더 룩은 단순히 패션니스타들에서만이 아니라 당당히 스트리트 패션의 하나로 자리 잡았으며 파워 숄더 룩의 50%이상을 차지하는 재킷이 여성복의 핵심 아이템의 하나로 부활하면서 재킷의 어깨 각도는 0도에서 30도 이상까지 다양하게 나타난다. 다양한 어깨 각도 중 10도, 15도, 20도의 형태가 70%이상을 차지하고 있으며 패턴의 형태는 몸판의 어깨선을 자연스럽게 올리고 확장한 어깨변형 패턴, 어깨선과 함께 소매산 부분을 절개한 소매산 변형 패턴, 몸판과 소매가 연결된 패턴이 주를 이루고 있다. 파워 숄더 패턴 전개는 어깨 각도가 높아질수록 각이 시작되는 점이 목옆점에 가깝게 하고 어깨끝점이 확장되어야 소매의 외관형태가 편안하고 피트성이 좋아진다. 어깨 변형의 경우 앞뒤 진동선의 시작점인 어깨점과 소매산의 정점 부분의 선이 완만하게 이어지도록 S라인형태를 유지하는 것이 가장 중요하며 소매산의 ease분량이 일반 재킷 소매보다 많아야 파워 숄더 실루엣이 자연스럽게 연출된다. 소매변형 패턴은 중심쪽 소매의 소매산 높이는 기본소매 소매산높이의 1.5cm를 외곽 소매분량으로 처리한 것을 고려하여 소매산 높이를 설정하고 어깨 각이 커질수록 외곽소매의 소매산 폭을 크게 함으로서 소매의 어깨점이 목옆점 방향으로 휘지 않고 각이 선 파워 숄더가 완성된다. 소매변형과 소매와 몸판연결 패턴의 경우 어깨점과 상완이 연결되는 부분에 충분한 여유가 필요하며 어깨각도도 다른 형태에 비해 상대적으로 낮아 보인다. 이와 같이 파워 숄더 재킷 패턴은 패턴 제작시 디자인적인 요소를 충분히 감안한 패턴 설계와 함께 소매의 달림선 위치, 어깨너비, 어개 높이 확장량, 소매통의 여유량 등을 고려하여 제작하는 것이 바람직하다.

• 농업과학연구
• /
• 제37권2호
• /
• pp.199-207
• /
• 2010

This research was conducted to determine the influence of physiological and chemical properties of root substrates on the growth of the daughter plants of 'Maehyang' strawberry produced by bag culture. The daughter plants produced by stock plants during bag culture were individually separated and grown in 10-cm diameter plastic pots containing six different formulations of root substrates: a) 50% peatmoss plus 50% vermiculite (5:5 by volume, A), b) 70% peatmoss plus 30% perlite (7:3, B), c) 70% coir dust plus 30% perlite (7:3, C), d) mixture of 35% coir dust, 35% peatmoss, and 30% perlite (3.5:3.5:3.0, D), e) mixture of 20% rice hull, 70% coir dust, and 10% perlite (2:7:1, E), and f) 30% rice hull plus 70% coir dust (30:70, F). The container capacity and air filled porosity of the growing medium varied greatly among the six substrate formulations evaluated. The substrates E and F had less container capacity and higher air-holding spaces than the rest of the formulations. Therefore, these two formulations (E and F) may cause a problem in water management during the production of healthy daughter plants. The substrate formulations A, B, and D retained higher nitrogen (N) concentrations than other formulations containing coir dust or rice hull. The substrate formulations E and F which contained rice hull had lower N, phosphorus (P), and potassium(K) concentrations than other substrate formulations containing coir. The quality of the daughter plants grown in all six different substrate formulations was good with the crown diameters at around 10 mm. Fresh weights of the daughter plants grown in substrate formulations A, C, and D were higher than those obtained from B, E, and F. Dry weights of the daughter plants showed a similar trend. The daughter plants having high fresh and dry weights and increased crown diameter are in demand by the industry. For this reason, the substrate formulations A, C and D can readily be used as potting mixes during the production of 'Maehyang' strawberry transplants utilizing the bag culture system.

• 한국식품저장유통학회지
• /
• 제15권1호
• /
• pp.30-36
• /
• 2008

백미삼(지근), 홍미삼(지근) 및 홍삼절편(주근: 수삼-절편-증삼-건조)을 대상으로 팽화시켜 팽화 인삼분말의 흡습 특성을 조사하고 수분활성도 예측모델을 수립하였다. 등온 흡습곡선은 대부분의 식품들과 같이 역S형의 형태을 나타내었으며 가장 낮은 온도인 $5^{\circ}C$에서 평형수분함량이 가장 높았다. 단분자층수분함량은 BET식 에 의해 $0.034{\sim}0.045g$ $H_2O/g$ solid의 값으로 계산되었으며 BET식에 적용했을 때 $R^2$가 $0.98{\sim}0.99$로 GAB식 보다 높은 유의성을 보였다. 등온흡습곡선의 적합도는 Kuhn 모델식의 $R^2$가 0.99 이상으로 가장 높은 적합도를 보였으며 그 다음으로 Halsey 모델식이 비교적 높은 적합도를 나타내었고 편차에서도 Kuhn 모델식이 $2.83{\sim}8.65%$로 가장 낮게 나타났다. 수분활성도 예측모델 수립을 위해 각 독립변수의 최적함수로 시간은 1n 함수, 온도는 선형 그리고 수분활성도 (RH/100)는 선형함수를 선정하였으며 가장 적합한 수분활성도 예측모델식은 세 가지 시료 모두 시간과 수분활성도을 독립변수로 하는 모델식이 가장 적합한 것으로 나타났다.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1757-1763
• /
• 2009

The composites were fabricated by adding 0, 15, 20, 25[vol.%] Zirconium Diboride(hereafter, $ZrB_2$) powders as a second phase to Silicon Carbide(hereafter, SiC) matrix. The physical, mechanical and electrical properties of electroconductive SiC ceramic composites by Spark Plasma Sintering(hereafter, SPS) were examined. Reactions between ${\beta}-SiC$ and $ZrB_2$ were not observed in the XRD analysis. The relative density of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 90.93[%], 74.62[%], 74.99[%] and 72.61[%], respectively. The XRD phase analysis of the electroconductive SiC ceramic composites reveals high of SiC and $ZrB_2$ and low of $ZrO_2$ phase. The lowest flexural strength, 108.79[MPa], shown in SiC+15[vol.%] $ZrB_2$ composite and the highest - 220.15[MPa] - in SiC+20[vol.%] $ZrB_2$composite at room temperature. The trend of the mechanical properties of the electroconductive SiC ceramic composites moves in accord with that of the relative density. The electrical resistivities of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 4.57${\times}10^{-1}$, 2.13${\times}10^{-1}$, 1.53${\times}10^{-1}$ and 6.37${\times}10^{-2}$[${\Omega}$ cm] at room temperature, respectively. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$. SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ are Negative Temperature Coefficient Resistance(hereafter, NTCR) in temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$]. The declination of V-I characteristics of SiC+20[vol.%]$ZrB_2$ composite is 3.72${\times}10^{-1}$. It is convinced that SiC+20[vol.%]$ZrB_2$ composite by SPS can be applied for heater or electrode above 1000[$^{\circ}C$]