• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.651-660
• /
• 2023

This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.371-381
• /
• 2023

The effectiveness of plant-based attractants was studied using large traps, which attracted relatively more snails in agricultural water drainage ditches and rice-cultivating environments, although their effectiveness in rice fields and lakes was limited. The rate began to rise after three hours of observation. Watermelon peel exhibited the highest apple snail attraction rate (13.8%), followed by potatoes (10.0%), and apple peel (8.8%). These values significantly differed from the attraction rate attributed to papaya leaves (F=3.84; P=0.0387). After 24 h, watermelon peel and apple peel indicated a higher rate of attraction (23.4% and 21.7%, respectively), which were significantly different compared with those of papaya leaves and potatoes (F=9.94; P=0.00455). Large bait traps outperformed funnel traps in capturing golden apple snails and trapped a significant number of snails measuring over 1 cm in size. Watermelon peel was the most effective attractant for a large bait trap, followed by apple peel, potatoes, and papaya leaves. On average, 110 snails were captured in the lure net. However, potatoes, apple peels, and papaya leaves caught an average of 93, 80, and 79 snails, respectively. Among the attractants, the lure effect of the snails was not significantly different. The efficiency of large bait traps in capturing snails, regardless of the plant attractant employed, followed the order: apple peel > watermelon peel and potatoes > papaya leaves > melon > Korean melon. Watermelon peel is highly recommended for farmer use, as well as apple peel and potatoes. Utilizing these snail attractants may contribute positively to developing a safe and environment-friendly integrated pest management strategy.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.247-261
• /
• 2023

Kimchi cabbage is widely consumed in Korea, with the popularity of this pickled vegetable dish growing internationally due to its health benefits. In this study, the physical (size, color), functional (antioxidant activity, total polyphenol, and flavonoid content), and nutritional (water- and fat-soluble vitamins) characteristics of two new kimchi cabbage varieties, namely red and gold kimchi cabbages (RKC and GKC, respectively), were analyzed and compared with those of the common kimchi cabbage (CKC). There were no significant differences in the thickness or length of the three kimchi cabbages, although RKC had the narrowest outer leaves among the three varieties (11.94 cm). Regarding chromaticity, yellowness was highest in GKC (29.86), whereas redness was highest in RKC (9.31). Furthermore, RKC had the highest recorded vitamin B₆ and B₉ (1,288.5 ㎍/100 g and 776.7 ㎍ dietary folate equivalent/100 g, respectively). On the other hand, the fat-soluble vitamins vitamin A (β-carotene) and K (Phylloquinone) were both highest in GKC (907.1 ㎍/100 g and 712.2 ㎍/100 g, respectively). Generally, all kimchi cabbage samples contained high levels of vitamin E (1.8-4.9 mg α-tocopherol equivalent/100 g). RKC attained the highest antioxidant activity and total polyphenol and total flavonoid contents among the three kimchi cabbages. These results show that gold and red kimchi cabbage can be used as raw materials in the food-processing industry.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.123-130
• /
• 2024

Objective: Beef of Jeju black cattle (JBC) is considered as a healthy meat type due to its significantly higher unsaturated fatty acids (UFA). Lipid (e.g., UFA) is highly susceptible to oxidizing agents, which results in the quality deterioration and economic value loss of meat products. Therefore, development and application of novel preservative techniques is necessary to improve the shelf-life stability of high-UFA beef. The objective of this study was to assess the applicability of chitosan-based coatings in preservation of JBC beef. Methods: Different coating solutions: 2% chitosan alone, and 2% chitosan containing 0.1% or 0.3% gallic acid were prepared to investigate their applicability in preservation of fresh beef during storage. Jeju black cattle beef (2-cm thick steaks) were non-coated (control) or coated with the above coating solutions, placed on trays, over-wrapped with plastic film and stored at 4℃. The microbiological indices, color, total volatile basic nitrogen (TVBN) and lipid oxidation of the beef were investigated after 1, 10, and 21 days of storage. Results: Coating with 2% chitosan alone reduced the spoilage bacteria count, TVBN and thiobarbituric acid reactive substances levels in the beef compared with control during storage (p<0.05). Noticeably, coating with 2% chitosan containing 0.1% or 0.3% gallic acid was more effective on retardation of spoilage bacteria growth, lipid oxidation and discoloration in the beef compared to the chitosan coating alone over the storage period (21 days) (p<0.05). Conclusion: Taken together, the combined chitosan and gallic acid coating could be used as a bio-preservative technique in the meat industry.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.123-136
• /
• 2024

This study aimed to assess the mobility and thermal comfort of personal protective equipment (PPE) among female healthcare workers, taking into account wearers' physique and PPE protection levels. A total of 16 participants (age: 26.3 ± 8.3 y, height: 161.5 ± 7.3 cm, body weight: 57.1 ± 11.0 kg, BMI: 21.9 ± 3.6), representing diverse body types, underwent four PPE conditions: L (Low_Plastic gown ensemble), M (Medium_Tyvek 400), H (High_Tyvek 800J with Powered Air Purifying Respirator [PAPR]), and E (Extremely high_Tychem 2000 with PAPR, Bib apron, and Chemical-resistant gloves). The mobility protocol consisted of 10 different tasks in addition to donning and doffing. The 10 tasks were repeated twice at an air temperature of 24.3 ± 0.1℃, 59±4%RH. Findings revealed a disproportionate relationship between PPE protection and wearer discomfort. Significant differences in clothing microclimate and total sweat rate were observed between the lowest (L) and highest (E) protection levels (p < 0.01), while distinctions among medium levels were inconclusive. Subjective evaluations favored conditions H and L over M and E (p < 0.05), indicating reduced heat, and humidity, increased comfort, and lower exertion. Instances of mobility discomfort, specially in the small body type group, underscored the need for a suitable PPE size system for Korean adult female medical workers. Furthermore, enhancements in gloves, shoe cover, and PAPR hood designs are essential for improving ease of movement and preventing hindrance.

• Journal of Applied Biological Chemistry
• /
• v.53 no.1
• /
• pp.13-20
• /
• 2010

Biological activities such as anti-oxidative and anti-microbial of the Seungmakalgeuntang, a traditional prescription, were evaluated. The electron donating ability of water, ethanol, supercritical fluid and 1,3-butylene glycol extract of Seungmakalgeuntang showed more than 50% at a 100 ppm concentration. At a 1000 ppm concentration, the superoxide dismutase-like activities of ethanol and supercritical fluid extract of Seungmakalgeuntang showed less than 50%. xanthine oxidase inhibition effect of the supercritical fluid extract showed more than 70% at a 1,000 ppm concentration, which was higher than vitamin C. From the measurement on lipid oxidation, the $Fe^{2+}$ chelating abilities of the supercritical fluid extract of Seungmakalgeuntang was more than 60% at a 100 ppm concentration. Also the $Cu^{2+}$ chelating abilities of supercritical fluid extract Seungmkalgeuntang was showed more than 60% at a 500 ppm concentration. Clear zones formed by sample against the human skin-resident microflora such as Staphylococcus epidermidis, Staphylococcus aureus and Propionibacterium acne of ethanol and supercritical fluid extract of Seungmakalgeuntang showed the highest among all the extracts tested using a 4mg/disc. The minimum inhibitory concentration (MIC) against both S. epidermidis and S. aureus showed 2,500 ppm in the extract of the supercritical fluid.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.255-269
• /
• 2011

The purpose of study has to analyze with non destructive method for researching the tool that could be measured with the status of record written on Hanji speedily. Because the original record should be destructed for analyzing with previous method in the case of the paper record, it was to develop the tool based on non destructive method for overcoming such limit. The study was used with FT NIR (Fourier transform NIR) for analyzing the Hanji for being written and preserved. The FT NIR spectrometer that of NIR spectrometer has the better performance of precision and accuracy than dispersive NIR spectrometer was used. Also the wavelength of FT-NIR was measured with 12,500 to 4,000 $cm^{-1}$, and the integrating sphere as diffuse reflectance type was used for analyzing Hanji. The moisture and acidity (pH) of chemical factors as quality evaluated factor of Hanji was studied for the correlation of NIR spectrum. And then The NIR spectrum was pretreated for showing the coefficients of optimum correlation. MSC and First derivative of Savitzky - Golay was used as pretreated method, and the coefficients of optimum correlation were shown by PLSR(Partial least square regression). And the coefficients of optimum correlation were calculated by PLSR(Partial least square regression). The correlation coefficients of acidity had 0.92 on NIR spectra without pretreatment. Also the SEP of acidity was 0.24. And then The NIR spectra with pretreatment would have more good correlation coefficients ($R^2=0.98$) and more good SEP(=019) on acidity. Therefore the data of correlation coefficients ($R^2$) and SEP with pretreatment was shown to be superior. And NIR spectra data of first derivative had best linearity on the correlation coefficients ($R^2=0.99$) and also SEP(=0.45) was superior. Therefore the correlation coefficients and SEP of first derivative had better than those of NIR spectra of no pretreatment. As such result, it was possible to evaluate the record status of Hanji speedily with integrated sphere and NIR analyzer as non destructive method.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Journal of the Korean Dietetic Association
• /
• v.8 no.3
• /
• pp.269-279
• /
• 2002

To investigate the change of perception after weight management education in elementary, middle and high school students, a survey was conducted. Same questionnaire was administered twice, before and after weight management education, to 426 students at 9 schools in Seoul area. The mean height, weight and body mass index were 145.5$\pm$8.0cm, 40.0$\pm$8.3kg, 18.6$\pm$3.0 for elementary school students, 160.1$\pm$5.2cm, 50.2$\pm$7.3kg, 19.5$\pm$2.4 for middle school students, and 162.2$\pm$5.0cm, 52.2$\pm$6.4kg, 19.8$\pm$2.3 for high school students, respectively. Before education, their preferred weight and perceived healthy weight was 35.4kg and 37.0kg among elementary school students, 44.8kg and 46.5kg among middle school students, and 47.3kg and 48.9kg among high school students, respectively. Differences between their present body weight and their preferred weight and/or perceived healthy weight appeared to be 4.5kg and 2.9kg in elementary school students, 5.6kg and 4.0kg in middle school students, and 5.1kg and 3.3kg in high school students, respectively. After administering education, the differences decreased to 2.5kg and -0.2kg in elementary school students, 4.2kg and 2.7kg in middle school students, and 4.3kg and 2.0kg in high school students, respectively (p<0.01). And their perception on own body shape was investigated using 5 point scale ('too lean' to 'too fat', 1 to 5) before and after education. The mean values changed from 3.1 to 2.8 in elementary school students, from 3.3 to 3.0 in middle school students, and from 3.4 to 3.2 in high school students (p<0.01). Their satisfaction with own body weight was monitored using 5 point scale ('very satisfied' to 'very unsatisfied', 1 to 5), also. The mean values changed from 3.0 to 2.7 in elementary school students, from 3.6 to 3.2, in middle school students, and from 3.8 to 3.4 in high school students (p<0.01). In the evaluation of their nutrition knowledge about weight control using 10 item quiz, before and after education, the mean quiz score was changed from 6.3 to 7.0 in elementary school students, from 7.0 to 7.9 in middle school students, and from 7.5 to 8.1 in high school students (p<0.01). In summary, nutrition education on weight management improved the subject's perception on perceived healthy weight and own body shape, and satisfaction with present body weight. This result suggests that nutrition education program should incorporate strategies to change incorrect beliefs and knowledge regarding weight control. Onto this, weight control education for students should start from their early age, be repeated periodically and consistently, and focus on the harmful effects of excessive weight loss and information on the practical and scientific ways of weight management.