• 폴리머
• /
• 제34권1호
• /
• pp.74-78
• /
• 2010

본 연구에서는 다양한 전류조건하에 전자선 조사로 가교된 리튬 이차전지용 폴리에틸렌 분리막을 제조하였다. 제조된 폴리에틸렌 분리막의 가교율은 조사량이 증가할수록 그리고 빔 전류가 낮을수록 증가하여 최대 71%까지 증가하였다. 낮은 빔 전류에서 조사된 폴리에틸렌 분리막은 상용 분리막 보다 우수한 열수축률(51%) 및 기계적 특성을 보여주었다. 가교된 분리막의 이온전도도는 $1.01{\times}10^{-3}\;S/cm$와 전해액 함침률(275%)은 조사되지 않은 분리막과 거의 동일하였다.

• 한국산업보건학회지
• /
• 제26권4호
• /
• pp.454-465
• /
• 2016

Objectives: The purpose of this study was to evaluate trends in asbestos exposure among asbestos-handling industries from 2000 to 2005. Methods: The data included the number of industries and workers exposed, concentrations of asbestos and the amount exceeded, and the type and size of industry by year. These data were collected by 46 regional employment and labor offices in Korea using work environment monitoring reports. A total of 1,481 samples from 284 industries were extracted from the reports and were analyzed with no data modification. Results: The means of asbestos concentration decreased from $0.84f/cm^3$ to $0.03f/cm^3$ during the period 2000-2005. Among the total of 1,481 samples, 11 samples(0.7%) exceeded the KOEL, and 178 samples(12.0%) were ACGIH TLV. The insulating paper product manufacturing industry was found to have the highest level of asbestos, followed by the fireproofing manufacturing industry, brake lining products manufacturing industry, commutator products manufacturing industries, and construction materials manufacturing industry. The number of asbestos handling industries decreased from 48 industries with 1,155 employees to 37 industries during the period of 2000 to 2005, but the number of asbestos workers expanded to the point that 1,182 employees could be found in 2005. Conclusion: Based on these results, the strengthening of the KOEL and new regulations turned out to help reduce asbestos exposure levels. This study recommends that retrospective exposure to asbestos based on various industry types should be assessed.

• 한국토양비료학회지
• /
• 제26권4호
• /
• pp.289-293
• /
• 1993

수학적(數學的) 방법(方法)을 이용하여 일평균토심(日平均土深)10cm온도(溫度) 추정(推定)을 검토(檢討)하기 위하여 수원기상태(水原氣象台)에서 조사(調査)된 토양온도(土壤溫度)(1982~1988) 자료를 이용하여 다음과 같은 결과(結果)를 얻었다. 1. 월평균토심(月平均土深)10cm온도(溫度)는 1월에 최저온도(最低溫度) 8월에 최고온도(最高溫度)를 나타내었으며, 1500GMT에서 가장 큰 폭(幅)을 지닌 년변이(年變異)를 보였으며 그리고 0900GMT에서 저온(低溫) 1500GMT에서 고온(高溫)을 나타내었음. 2. 토심(土深)10cm온도(溫度)의 하강(下降) 및 상승(上昇)은 연변이(年變異)를 나타내었으며, 토심(土深)10cm온도(溫度)는 큰 변이성(變異性)을 나타내었음. 3. 수원지방(水原地方)의 순평균토심(旬平均土深)10cm온도(溫度)에 대한 날짜수(數)(D)의 회귀식(回歸式)은 다음과 같다. ($r=0.997^{**}$) Y= 13.05-6.58sin($2{\pi}D$.365) -12.45cos($2{\pi}D$/365) 4. 수원지방(水原地方)의 순평균토심(旬平均土深)10cm온도(溫度)의 실측치(實測値)에 대한 추정식(推定植)의 회귀식(回歸式)은 다음과 같다($r=0.994^{**}$, 표준오차(標準誤差)=$0.75^{\circ}C$) Y=-0.188+0.984X 5. 일평균토심(日平均土深)10cm온도(溫度) 추정치(推定値)의 75%는 실측치(實測値)와 ${\pm}20^{\circ}C$ 오차(誤差)가 있었음 6. 1~5월 까지의 추정치(推定値)는 실측치(實測値)보다 높았으며, 6~12월 까지의 추정치(推定値)는 실측치(實測値)보다 낮았음.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.342-346
• /
• 2006

건설 산업이 점차 전문화되고 복잡화 되어감에 따라 참여 조직들이 증가하게 되었고, 사업자체의 대형화 추세로 인해 건설사업관리(CM)의 필요성은 날로 증대되고 있다. 그러나 이와 같은 필요성의 증대에도 불구하고 선진국에 비해 성과측정과 평가를 통한 활성화는 매우 부진한 실정이다. 이에 따라 본 연구에서 다루고자 하는 AHP 기법을 이용한 건설사업 단계별 CM 업무 체크리스트는 CM 업무를 사업 진행 단계별로 구분하여 각 단계별 수행업무의 실행 정도를 체크하고 이를 통한 건설 프로젝트의 성공적 완수가 가능하도록 효율적인 CM 업무가 수행되도록 하는 역할에 있다. 본 연구의 최종결과불인 건설사업 단계별 CM업무 체크리스트를 건설사업관리자 및 발주자, 설계자, 시공자 등 모든 건설 프로젝트의 이해관계자가 활용한다면, 건설 산업에 있어서의 사업관리 업무 효율성 증대 및 건설 프로젝트의 목적에 부합되는 최종 결과물 산출이 가능할 것이다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.73-80
• /
• 2001

일반적으로 건설사업관리는 발주자를 위한 방식과 시공자를 위한 방식으로 구분되고 있으나 현재 국내에서는 사업관리 기능을 포함한 감리를 중심으로 대부분의 프로젝트가 진행되고 있는 실정이다. 이로 인하여 사업참여자간의 업무관리가 복잡하고 감리자 및 건설사업관리자가 효율적인 사업관리업무를 수행하는데 어려움이 있다. 따라서 전문화되고 체계적인 사업관리절차를 포함한 통합사업관리시스템의 활용이 어느 때보다 절실히 요구된다. 본 연구에서는 전주월드컵경기장의 CM사례를 통해 현행 CM업무의 현장적용상의 문제점을 분석한 후 통합사업관리시스템과 CM의 발전방향을 구체적으로 제시하는 동시에 현장 CM에 대한 개념구축, CM업무 수행 지침서 작성 등의 현장 건설사업관리업무의 향후 발전방향을 제시하고자 한다.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.58-78
• /
• 2006

This study materializes body type measurement based on ISO(International Standard Organization)size system, targeting 1381 Chinese women, and suggests clothes size standards. It provides basic information on Chinese women size for Korean clothes companies advanced in China to strengthen the national competitiveness of Korean clothing industry. First, after the body type examination, based on the ISO's drop value, the results of types are in its decreasing order: A, M, H, and D. Second, women upper garment sizes by body types are set in the section of height 152cm, 160cm, and 168cm. Garment sizes are suggested based on the section that has more than 0.8% of appearance rate for the survey target: A, H, and M. Third, the clothes sizes of women pants are set in the section of height 152cm, 160cm, and 168cm just with the same as the upper garment.

• 복식
• /
• 제52권2호
• /
• pp.59-70
• /
• 2002

For the purpose of providing basic data for the development of size specifications for middle-aged women in Busan, one dimensional measurements were made with the subjects. ranging 45 to 59 in age. The following are the conclusions : 1) According to ages, the middle and elder groups of the middle-aged women shared similar body types, having shorter height, more lowered bust. and increased upper-body depth and girth factors, compared with the earlier middle-aged women group. But the thigh girth of the elder middle-aged group (age: 55∼59) was the lowest, maybe owing to the aged lower-body muscles. 2) In the comparison with national averages. armhole girth, elbow girth, wrist girth. back waist length, side neck point-B.P.-waist line, and sleeve length showed great differences. This is problematic in that the national size standards fail to reflect each legion\`s peculiar body type characteristics. 3) Even though body types were classified according to drop value criteria suggested by KS specifications, 23.05% did not belong to the criteria. They were thus classified as A, N, and H body types, following the distribution of the present experiment. 4) In consideration of the economy factor of the production and sales of the clothes industry, the combinations of height and chest garth for the middle-aged Busan women were as follows: 155cm-85cm (Body Type A) 150cm-88cm (Body Type N), and 155cm-94cm (Body Type H).

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.93-101
• /
• 2015

This study aims to suggest the patternmaking method of men's slim-fit six-panel jacket sloper in their 30's. The researcher collected four kinds of existing slopers and carried out appearance evaluations twice. The researcher's sloper was developed by modifying and supplementing the existing sloper with high scores from the evaluations. The results are as follows: first, when comparing the four kinds of existing slopers, dimensions and patternmaking methods of 18 areas, especially width of back chest and side chest, were varied according to the existing slopers. Second, the researcher's sloper had excellent scores in the appearance evaluations such as placements of side line on the chest, waist, hip line, measurement in dimension from the center back hip line and from waist line, and appearance of neck line. Third, the suggested sloper are as follows: the ease on the chest is 10.5 cm, 8~10 cm extends for the jacket length, the measure in dimension from the back waist is 2.2 cm, dart intake at the back side is 4 cm, dart intake at the front side is 1.5~2 cm, and dart intake at the front waist is 1 cm. This suggested six-panel jacket sloper is expected to be useful for the various slim-fit jacket designs which have the side panels.

• KSBB Journal
• /
• 제28권3호
• /
• pp.191-195
• /
• 2013

Cordyceps militaris (CM) occurring from a fruiting body by a host insect is a kind of mushroom, which is composed of animal host and plant fruit body. CM contains large amounts of useful ingredients including polysaccharides, vitamins, amino acids, minerals, etc. The essential amino acids from CM including cystine, lysine, and methionine can be expected to improve damaged hair treatment as effective ingredients. In this study, the improvement effect of the CM extracts on chemical and physical properties for damaged-hair treatment was investigated. The cysteic acid and cystine monooxide produced by oxidation of cystine were analyzed their chemical structure by FT-IR spectroscopy. It was confirmed that the vibration absorption peak ($1,041cm^{-1}$) of cysteic acid was reduced and increased sulfur content considerably which means meaningful improvement effect on damaged-hair treatment. Apparently, the cuticle morphology of the damaged-hair was improved significantly by treatment with CM extracts. Especially, confocal laser scanning microscope images of the damaged-hair treated with the extract showed highly increased fluorescence intensity which means promising effect in hair treatment. The tensile strength of the damaged hair treated also increased by 168% compared with the damaged hair.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.48-49
• /
• 2020

Recently the diversification of construction market and the continuous reduction of construction amount are raising the need of alternative delivery method in the construction industry. The foreign advanced companies actively adopted the CM at Risk delivery method where they perform the service of agent CM in the design phase, and agree GMP(Guaranteed Maximum Price) with the client at the time of 50~80% completion of design. Even in Korea they began to apply that method to pilot projects. In CM at Risk, through the early participation of builder, the level of design completion can be improved and the change order and construction period delay can be minimized. On the other hand, GMP is usually calculated when the design is about 80% complete, so there is uncertainty in the construction cost. Therefore, in this research, the increased amounts of construction cost are analyzed in a number of public construction projects, and GMP calculation process is proposed using the analysis results and CBR(Case-Based Reasoning) technique to reduce the construction cost increase in the construction phase.