• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.1-10
• /
• 2021

Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

• 패션비즈니스
• /
• 제27권4호
• /
• pp.101-114
• /
• 2023

This study aimed to create globally acceptable Hanbok-inspired work uniforms, by developing practical designs and providing useful resources for incorporating Hanbok characteristics into office attire. First, to establish the elements that the Hanbok work uniform should have, the definition and characteristics of service clothes and preferences for the process of modernization of traditional Hanbok were reviewed through a review of the preceding studies. For the Hanbok work uniform design, a total of 4 pieces, 2 for each male and female, were planned, a schematic diagram was created, and the design was modified after evaluation by fashion design experts. I made a pattern of the modified design with a CAD program, imported it into CLO 3D to produce a virtual costume, and confirmed the final design draft. Work uniform design has symbolism, functionality, and aesthetics as its characteristics. The functionality of the Hanbok work uniform designed in this study is suitable for the season, and it was designed to increase the efficiency of work when worn for a long time. The design was focused on the development of materials and patterns in consideration of comfort and activity. The esthetic nature of hanbok-inspired work clothes was intended to reveal details that could highlight the silhouette of the human body and reflect the beauty of hanbok.

• 한국의류산업학회지
• /
• 제23권4호
• /
• pp.504-514
• /
• 2021

This study attempted to extract and structure the job skills required for 3D designers, which have been recently introduced to the fashion industry. The study aimed to materialize and objectify the 3D designer's job, using a focus group interview for the survey. The 3D designer has the TD task of making 3D virtual samples using the pattern files developed in Pattern CAD. Graphic design and fabric digitization are also major tasks for the 3D designer. CLO is mainly used for 3D virtual sample production, and PixPlant, Substance, Photoshop, Cinema 4D, Daz studio, and 3ds MAX are used for image and avatar editing. As per the job skills required for 3D design work, basic knowledge about patterns and sewing, skill in 3D virtual clothing technology, ability to use various software, and English skills were considered important, in that order. In particular, the need for knowledge about patterns and sewing became more important than the skill in 3D virtual clothing technology itself. To train 3D designers, it was found that not only 3D virtual clothing software, but also education on patterns and clothing construction, CAD developer's curriculum certification system, and 3D designer qualification management were required. In addition, 3D designers are recognized as an essential job in fashion vendors, and the demand for domestic brands is increasing. The biggest limitation of the 3D virtual clothing system is the perfection of the digital fabric. Also, technical improvement is needed.

• 패션비즈니스
• /
• 제21권5호
• /
• pp.30-42
• /
• 2017

A comprehensive research must be conducted on manufacturing techniques such as patterns and sewing, with the understanding of material properties to satisfy consumers' emotions with a strong fashion trend orientation. Physical and emotional characteristics may change depending on the characteristics of the material, and the overall silhouette and feeling of the garment can change depending on how sewing is conducted.To examine the completeness of a finished garment depending on different kinds of clothing material, this study fabricated an actual garment and a 3D virtual garment as well using 3D CAD IMAGE SYSTEM (CLO 3D, DC Suite, etc.) for a comparative analysis. These two methods have their own advantages and disadvantages. This study selected five of the most representative clothing materials and conducted a comparative analysis on appearance differences between actual clothing and virtual clothing by material. Additionally, the study verified the similarity between actual clothing and virtual clothing by comparing their physical properties by material, and evaluated the objectivity and accuracy of the reproducibility of material properties of virtual clothing.

• 복식문화연구
• /
• 제29권1호
• /
• pp.65-86
• /
• 2021

This study aims to develop a hanbok design method in response to recent changes in consumption trends that emphasize new aesthetic and cultural values, which contrast with the existing cultural order and repetitive normative styles in fashion designing. With this in mind, our study explores the main features of deconstruction fashion design as a theoretical guide for developing a methodology for deconstruction hanbok design, on the basis of which new, experimental and creative hanbok design works can be produced. To do this, we first investigate current trends in hanbok design and changing concepts of Korean fashion design through literature review of previous studies. Secondly, we explore deconstructionism and analyze its features to lay down the foundation for a post-modern approach in hanbok design. As the result of analysis, the main features of deconstruction fashion design are summarized as the following: 1) non-finishing, 2) decomposing and recomposing, 3) recycling, 4) transparent, 5) grunge, 6) flattening, and 7) exaggeration. Based on the identified core features of deconstruction fashion design, we develop a creative method of hanbok design in the context of modern Korean fashion design. Finally, we show five design outputs via a 3D digital fashion design process using the CLO3D software program.

• 패션비즈니스
• /
• 제27권4호
• /
• pp.67-87
• /
• 2023

This study analyzed the fashion design features of Iris van Herpen and createdsixdigital fashion designsusing the SCAMPER technique with 3D clothing design software, incorporating a futuristic theme. The research methodology involvedcase analysis and a literature survey. First, the study summarizedthe design style and characteristics of Iris van Herpen. Second, a design concept wasestablished, and a design mood board wascreated. Third, the resulting design features were combined with the SCAMPER technique to incorporate Iris van Herpen's design elements intonew digital fashion designs. Fourth, after discussion with the professor and expert group, six designs were selected for production. They includededgy suit coats, overcoats, asymmetrical hoodies and asymmetrical skirts, irregularly shaped tops, dresses, leggings, jackets,and fishtail skirts. This study provides a reference for the future development of digital fashion designs and showcases the integration of science and technology in fashion design.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.261-272
• /
• 2021

The purpose of the present study was to evaluate the thermal insulation of air-filled winter jackets according to the amount of air-filler using a thermal manikin. The insulation of these jackets' was compared to a down padded jacket with an identical design and size. The amounts of air-filler were 100% (26,219 cm³), 70% (18,645 cm³), 50% (13,110 cm³), and 0% (0 cm³). The results showed that a clothing insulation (Icl) of 0%, 50%, 70%, and 100% air, and 100% down jackets was 0.208, 0.243, 0.207, 0.176, and 0.315 clo, respectively. In addition, the down jacket with waisttaped had a clothing insulation of 0.369 clo. However, the highest value of clothing insulation per clothing weight was the 50% air-filled jacket in all conditions. In terms of regional power consumption of the thermal manikin, the down jacket consumed less power for the shoulder and chest than the air-filled jackets. In conclusion, in order to maximize the thermal insulation of air-filled jackets, an optimal amount of air-filler, that is, an amount which does not compromise (break) the layer of inner air between the surface of manikin and the lining of the jacket, should be explored. Further studies on lining materials, end-closed design, and changes in thermal insulation under the conditions of strong wind or heavy snow are recommended.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.105-115
• /
• 2015

This study aims to compare the ease of men's single-pleated pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The researchers selected five(four educational materials and one industrial pattern) slim-fit single-pleated pants which is the current fashion trend in menswear. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing, opacity, and clothing pressure. The results showed that D pants had the greatest ease on the waist circumference, while C pants had the least ease. The E pants had the greatest ease on the hip circumference, then B pants and C pants showed less ease. Also, the E pants had the longest on the pants length, then D pants showed the shortest. In the appearance evaluation, A pants received the most favorable results, followed by D, B, E, and C pants, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem in all pants, so the clothing pressure was high. From the results, we can understand that each of the 5 single-pleated pants patterns has different ease amount and silhouette.

• 패션비즈니스
• /
• 제27권5호
• /
• pp.60-77
• /
• 2023

The scale of the industry utilizing the Metaverse platform is gradually growing around the world. Fashion brands are also starting to utilize the Metaverse platform as a new market to replace the next e-commerce platform by targeting new consumers, MZ generation, and even Alpha generation. In this study, a real K-fashion designer's outfit was made into a 3D outfit using CLO 3D program to express it in a new market, the Metaverse 3D platform. It was then compared with a real outfit. An avatar prototype was completed using Max program to simulate the 3D digital fashion outfit and produce an avatar through an optimization process. The 3D outfits showed the same level of results as the actual outfits in terms of fabric surface, material texture, drapability, overall outfit, details, and trimmings. In addition, we proposed a 2D work on total styling suggestion and modeling to secure data sets for future AI-based styling services. In conclusion, this study revealed that actual outfits and 3D outfits had the same results. It is significant that it can be a sample work to build a styling data set through styling suggestion and content production as a significant amount of styling DB construction will be required before AI styling automation services.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.896-912
• /
• 2014

This study analyzed the reality of avatar size when it was automatically changed by different height and waist circumference inputs. This study focused on analyzing 22 of 28 avatar parts created by the 3D Clo virtual fitting program, based on the height and 'waist circumference of 2,247 woman samples from the $6^{th}$ Size Korea survey data. The 'waist back L'. and 'bishoulder L'. of the avatars were shorter than the bodies; however, the avatars' 'waist H'. and 'arm L'. were longer. Differences between the avatar and body increased in the taller groups. The body proportion of tall avatars was more distorted than small avatars. There were also some exaggerations in some circumferences. The 'bust C'. of the avatar was larger in the group with thin upper torsos; however, the 'hip C'. and 'upper arm C'. were larger in the group with thick upper torsos. The avatar torso silhouette of each somatotype was not representative of the real body silhouette as the 'hip C'. and 'bust C'. always increased together.