• Journal of the Korean Solar Energy Society
• /
• v.36 no.3
• /
• pp.33-43
• /
• 2016

Daylight is an important factor which influences building energy efficiency and visual comfort for occupants. It is important to predict precise sky luminance at the early stages of design to reduce light energy in the building. This study predicted sky luminance distributions of standard sky model(CIE overcast sky, CIE clear sky) that was provided from the CIE(Commission internationale de $l^{\prime}{\acute{e}}clairage$). Afterward, result of sky luminance was compared and verified with simulation value of Radiance program. From the CIE overcast sky, zenith and horizon ratio is about 3:1. From the CIE clear sky, luminance value gets most high value around the sun. On the other hand, luminance value is the lowest in the opposite direction of the sun when angle is $90^{\circ}$ between the sun and sky element. As a result of comparing the calculation results with Radiance program, sky luminance prediction error rate is 0.4~1.3% when it is CIE overcast sky. Also, sky luminance prediction error rate is 0.3~1.5% when it is CIE clear sky. When compared with the results of radiance simulation, it was evaluated as fairly accurate.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.97-103
• /
• 2010

Sky simulator is a effective daylighting design tool that can evaluate three dimensional performance of lighting. Especially, the dome type sky simulator offer reliable and reproducible daylighting performance with different standard sky models. Recently, K university has developed the dome type sky simulator(sky dome) with the diameter of 6.5m and the height of 3.7m. The sky dome consists of a group of 145 large steel panels with 72 halogen lamps which are arranged in a circular array. The luminance distribution of the sky dome can be calibrated by changing the angle and the brightness of the lamps respectively. To allow more reliable prediction and evaluation of daylighting through the sky dome, It is essential to validate the sky luminance distribution of the sky dome. This study consider the validation of the comparisons between the measured and the calculated luminance values for the CIE standard overcast sky. Also, the error rate between the measured and the calculated luminance values were compared to the previous studies. The results indicated that the K university sky dome can reproduce reliable CIE standard overcast sky with the average relative error rate of 4.4% and root-mean-square error(RMSE) of 5.4%.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1120-1130
• /
• 2018

This study was conducted to investigate the dressing percentage and physicochemical characteristics, such as fatty acid composition, water holding capacity (WHC), shear force, meat color, cooking loss, and sensory evaluation, of experimental pork obtained from a total of 12 standard pigs and sows. The water content of tenderloin (73.38%) was the highest in standard pork (p<0.05). A statistically significant difference in crude protein content was shown between standard pork and sow pork (p<0.05). There were significant differences between standard pork and sow pork in shear forces of loin and tenderloin (p<0.01). There was a significant difference in WHC between standard pork and sow pork in loin, tenderloin, and hind legs (p<0.05). The CIE $L^*$ and CIE $b^*$ values of standard loin were significantly higher than those of sow loin (p<0.05). The CIE $a^*$ values of sow loin were significantly higher than those of standard loin (p<0.05). The contents of arachidonic acid for standard pork and sow pork were 0.33% and 0.84%, respectively (p<0.05). However, there was no difference in the total content of unsaturated fatty acid between the two groups. There were no significant differences between standard pork and sow pork after sensory evaluation, except for color and tenderness. The overall acceptability of standard pork was significantly higher than that of sow pork (p<0.05).

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.51-57
• /
• 2005

For the evaluating daylighting performance, field measurement, scale model test and a set of computer tools can be applied. For the scale model measurements, the sky simulator is a vital facility to represent the desired sky conditions consistently. Recently K university has developed a large size sky simulator, 6m-diameter and 3.7m-height, that is suitable for the international standard. To verify the reliability of the sky simulator, the luminance distribution on the inner sky surface was measured and compared with the CIE standard overcast sky model. It is found that the sky simulator can be reproduced the CIE standard overcast sky condition with 4.3% as mean difference. K university sky simulator is fully validated for usability and accuracy for daylighting researches.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.1-10
• /
• 2007

KH University has developed a large sky simulator which is its scale suits international standard. To verify the reliability of the sky simulator, the luminance of 36 points on the inner sky surface was measured and compared with the CIE standard overcast sky model. It was found that the sky simulator can reproduce the CIE standard overcast sky condition with 1.8[%] of mean difference. To identify the differences of daylighting performance, scale model measurements were taken under a real sky and in a sky simulator. Under overcast sky conditions, two kinds of scale model experiments were conducted by using the photometric sensor Li-cor. Firstly, a 1/20 scale model of a side-lit office room 4.9[m] wide, 7.2[m] long, and 2.6[m] high was created. Five measurement points were set at 1.2[m], 2.4[m], 3.6[m], 4.8[m], and 6.0[m] from the window. The mean difference of the light factor between the sky simulator and real sky was 7.1[%]. Secondly, a 1/30 scale model of a top-lit atrium 15[m] wide, 15[m] long, and 15[m] high was created. The measurement point was set at center of the room and the well indexes of the model were set in 5 types. The mean difference of the light factor between the sky simulator and real sky was 1.7[%]. This proved that the sky simulator is fully accurate and usable for daylighting research.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.19-25
• /
• 2005

A colour-difference formulae would be based on a colour appearance model, but, So far, most colour-difference formulae in common use are based on empirical fits to data. Therefore, of the many proposed, none are completely satisfactory but advances have been made in recent years. A new color-difference data set has been produced with the aims of making a comparison of the advanced CIE Lab formulae as well as confirming the effect of color-difference. 416 low lightness pairs that have only lightness-difference were produced for evaluation of CIE Lab-based formulae on lightness-difference from glossy polyester fabric. The standard color-difference pair was prepared and used. It was neutral grey sample pair that has only lightness difference. The standard pair was used to investigate lightness tolerances. And grey-scale method used to evaluate visual assessment. CIE Lab coordinates of the samples were measured using a X-Rite 8200 spectrophotometer. Visual assessments were carried out using Gretag Macbeth The Judge II Light Booth. A study of color tolerances at low lightness was carried out and get avaliable some results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.31-40
• /
• 2009

Tourist cities as like Las Vegas in USA, Shanghai and Hong Kong in China show various architectural outdoor lighting methodologies and techniques. For these three cities, architectural outdoor lighting methods and techniques were investigated, and the luminous values of advertising illuminants as well as the maximum and minimum luminous values on the walls were measured. Then, based on current CIE luminance standard and IES recommended luminance ratio, characteristics of architectural outdoor lighting in each city are analyzed through the absolute and relative measured luminance values.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.1-13
• /
• 2009

The purpose of this study is to investigate the applicability of the CIE standard on lighting environments to Korea. In the field study, horizontal and the vertical illuminance was measured at the pedestrian road in the central business district of a city, and the questionnaires were conducted to get information regarding pedestrian's satisfaction with lighting environment. Four areas were selected for this survey. That areas have different type of pedestrian roads concerning the lighting conditions and the number of walkers. From the results of the measurements, It is known that the illuminance of pedestrian roads is different according to the lighting conditions and the number of poot passengers. Also the results of questionnaires show that the illuminance of the pedestrian roads affect to the pedestrian's satisfaction. Lastly, the CIE standard on lighting environments is applicable to the central business district of the cities in Korea.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.110-117
• /
• 2009

This work introduces the uncertainty evaluation formulation on color measurement of light sources and display devices, such as CIE 1931 (x, y) chromaticity, CIE 1960 (u, v) chromaticity, correlated color temperature, and distribution temperature. All the mentioned quantities are reduced from spectral data in the visible range, for which uncertainties are strongly correlated between different wavelengths. Using matrix algebra we have formulated the uncertainty propagation from the SI- traceable spectral irradiance standard to the individual color related measurement quantities taking the correlation between wavelengths into account. As a result, we have demonstrated uncertainty evaluation examples of 3 types of light sources: CIE illuminant A, LED white light, and LCD white light. This method can be applied to any other quantities based on spectral measurement such as solar irradiance, material color measurement, etc.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.559-563
• /
• 2010

The representation of color with natural dyes is closely related with the modern well-being life. This study is focused on the representation of target color of the blue, yellow, and red color system, these color sources were originated from the green tea, gardenia, and black rice respectively. The quantitative numerical value of brightness (L), color coordinates (a, b) were designated for the target color, the optimum color nearest to the target value was extracted with the solvent pH, temperature, and extraction time. The longer the extraction time had more thickening color in case of the gardenia. The L-a-b coordinate of extracted color were analyzed with the color difference meter and compared with the target color. The experimental variables were optimized to extract the color of the smallest ${\Delta}E$ with the target color. As a result, the CIE standard value was proposed and the color was represented.