• 한국안광학회지
• /
• 제14권4호
• /
• pp.33-37
• /
• 2009

목적: 본 연구에서는 양극산화방법을 이용하여 티타늄 안경테를 다양한 색상으로 착색하는 조건들을 규명하고자 한다. 방법: 자체 제작한 양극산화박막 제조 장치를 사용하였다. 음극에는 $3{\times}3cm^2$의 백금판을 사용하였으며, 양극에는 티타늄 안경테 재료 시편을 장착한 다음 전해액이 접촉하도록 하였다. 전원 장치는 정전류 방식으로 시간에 따라 일정한 전류가 미세하게 조정되도록 고안 설계하였다. 산화막의 색분석은 분광측색계의 적분구를 이용하였고, 색좌표는 CIE $L^*a^*b$ color system를 사용하였다. 결과 및 고찰: 전극에 인가되는 시간을 조정하여 티타늄 안경테 재료의 산화막($TiO_2$) 두께를 변화시킴으로서 호도색, 황갈색, 군청색, 파란색, 연푸른색, 녹두색, 황록색, 연보라색, 보라색, 꽃분홍색, 청록색, 에메랄트색, 녹색등 다양한 색상을 얻을 수 있었다. 정확한 색상 변화를 CIE $L^*a^*b^*$ 값을 측정하였다. 그 결과 티타늄 안경테 재료 산화막의 두께가 두꺼워지면서 색좌표 상에서 시계방향으로 변화가 진행 되는 것을 알 수 있었다. 결론: 티타늄 안경테 재료에 양극산화에 의해 착색원리를 규명하였다.

• 한국정보통신학회논문지
• /
• 제15권3호
• /
• pp.589-596
• /
• 2011

화질개선 시스템은 디스플레이 기술의 발달로 인한 사용자들의 요구사항을 만족시키기 위하여 많은 개발이 되어왔다. 대부분의 화질개선 시스템들은 모든 입력 색상에 대한 색도 변환을 수행하여 일부 색상에서 왜곡현상이 발생되는 문제점이 존재하였다. 이러한 문제점을 해결하기 위하여 피부색 보호 알고리즘(Skin Protection Algorithm, SPA)을 이용한 화질개선 시스템이 제안되었다. 하지만, 기존의 화질개선 시스템은 단방향으로 색상 강조를 수행함에 따라 색상의 포화 및 탈색현상을 방지할 수 없다는 단점이 존재하였다. 따라서 본 논문에서는 CIE 1976 u'v' 색도 좌표계에서 SPA를 적용한 색도 변환 시 입력 영상의 밝기 정보에 따라 적응적으로 색도 확장 및 축소를 동시에 수행 하도록 하였다. 42장의 테스트 영상으로 기존 시스템과의 RGB Gamut 변화율을 비교함으로써 제안한 화질개선 시스템의 성능을 확인하였다.

• 한국염색가공학회지
• /
• 제17권2호
• /
• pp.19-25
• /
• 2005

A colour-difference formulae would be based on a colour appearance model, but, So far, most colour-difference formulae in common use are based on empirical fits to data. Therefore, of the many proposed, none are completely satisfactory but advances have been made in recent years. A new color-difference data set has been produced with the aims of making a comparison of the advanced CIE Lab formulae as well as confirming the effect of color-difference. 416 low lightness pairs that have only lightness-difference were produced for evaluation of CIE Lab-based formulae on lightness-difference from glossy polyester fabric. The standard color-difference pair was prepared and used. It was neutral grey sample pair that has only lightness difference. The standard pair was used to investigate lightness tolerances. And grey-scale method used to evaluate visual assessment. CIE Lab coordinates of the samples were measured using a X-Rite 8200 spectrophotometer. Visual assessments were carried out using Gretag Macbeth The Judge II Light Booth. A study of color tolerances at low lightness was carried out and get avaliable some results.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.251-254
• /
• 2008

Blue-white reflective cholesteric liquid crystal display was prepared by a unique method of single liquid crystal layer, the combination of yellow color liquid crystal and blue color backplane. The dopant and host combination of chlolesteric liquid crystal affects the color spectrum. The CIE chromaticity coordinates of blue and white are (0.10, 0.16) and (0.29, 0.30), respectively. The relatively low driving voltages of 32 V for blue-white display are obtained.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2899-2905
• /
• 2011

We have demonstrated that TPyPA can be used as an efficient multi-functional material for OLEDs; hole transporting material (HTL), blue and white-light emitter. The device based on TPyPA as the HTL exhibited an external quantum efficiency of 1.7% and a luminance efficiency of 4.2 cd/A; these values are 40% higher than the external quantum efficiency and luminance efficiency of the NPD-based reference device. The device based on TPyPA as a blue-light emitter exhibited an external quantum efficiency of 4.2% and a luminance efficiency of 5.3 $cdA^{-1}$ with CIE coordinates at (0.16, 0.14), the device based on TPyPA as a white-light emitter exhibited an external quantum efficiency of 3.2% and a luminance efficiency of 7.7 $cdA^{-1}$ with CIE coordinates at (0.33, 0.39). Also, TPyPA-based organic solar cell (OSC) exhibited a maximum power conversion efficiency of 0.35%. TPyPA-based organic thin-film transistors (OTFTs) exhibited highly efficient field-effect mobility (${\mu}_{FET}$) of $1.7{\times}10^{-4}cm^2V^{-1}s^{-1}$, a threshold voltage ($V_{th}$) of -15.9 V, and an on/off current ratio of $8.6{\times}10^3$.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.379-385
• /
• 2006

A stacked white organic light-emitting diode (OLED) having a blue/orange emitting layer was fabricated by synthesizing nitro-DPVT, a new derivative of the blue-emitting material DPVBi on the market. The white-emission of the two-wavelength type was successfully obtained by using both nitro-DPVT for blue~emitting material, orange emission as a host material and Rubrene for orange emission as a guest material. The basic structure of the fabricated white OLED is glass/ITO/NPB$(200{\AA})$/nitro-DPVT$(100{\AA})$/nitro-DPVT:$Rubrene(100{\AA})/BCP(70{\AA})/Alq_3(150{\AA})/Al(600{\AA})$. To evaluate the. characteristics of the devices, firstly, we varied the doping concentrations of fluorescent dye Rubrene from 0.5 % to 0.8 % to 1.3 % to 1.5 % to 3.0 % by weight. A nearly pure white-emission was obtained in CIE coordinates of (0.3259, 0.3395) when the doping concentration of Rubrene was 1.3 % at an applied voltage of 18 V. Secondly, we varied the thickness of the NPB layer from $150{\AA}\;to\;200{\AA}\;to\;250{\AA}\;to\;300{\AA}$ by fixing doping with of Rubrene at 1.3 %. A nearly pure white-emission was also obtained in CIE coordinates of (0.3304, 0.3473) when the NPB layer was $250-{\AA}$ thick at an applied voltage of 16 V. The two devices started to operate at 4 V and to emit light at 4.5 V. The external quantum efficiency was above 0.4 % when almost all of the current was injected.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.397-404
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn't exist in the region of color region 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphors of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.39-39
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on Illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn′t exist in the region of color region. 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphers of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.571-575
• /
• 2014

We synthesized new materials of $Zn(HPB)_2$ and Ir-complexes as blue or red emitting material. We fabricated white Organic Light Emitting Diodes (OLED) by using $Zn(HPB)_2$ for the blue emitting layer, Ir-complexes for the red emitting layer and $Alq_3$ for the green emitting layer. We fabricated white OLED by using double emitting layers of $Zn(HPB)_2$:Ir-complexes and $Alq_3$. The doping rate of Ir-complexes was varied, such as 0.2%, 0.4%, 0.6%, and 0.8%, respectively. When the doping rate of $Zn(HPB)_2$:Ir-complexes was 0.6%, white emission was achieved. The Commission Internationale de l'Eclairage (CIE) coordinates of the white emission was (0.322, 0.312).