• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.33-43
• /
• 2016

Daylight is an important factor which influences building energy efficiency and visual comfort for occupants. It is important to predict precise sky luminance at the early stages of design to reduce light energy in the building. This study predicted sky luminance distributions of standard sky model(CIE overcast sky, CIE clear sky) that was provided from the CIE(Commission internationale de $l^{\prime}{\acute{e}}clairage$). Afterward, result of sky luminance was compared and verified with simulation value of Radiance program. From the CIE overcast sky, zenith and horizon ratio is about 3:1. From the CIE clear sky, luminance value gets most high value around the sun. On the other hand, luminance value is the lowest in the opposite direction of the sun when angle is $90^{\circ}$ between the sun and sky element. As a result of comparing the calculation results with Radiance program, sky luminance prediction error rate is 0.4~1.3% when it is CIE overcast sky. Also, sky luminance prediction error rate is 0.3~1.5% when it is CIE clear sky. When compared with the results of radiance simulation, it was evaluated as fairly accurate.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.97-103
• /
• 2010

Sky simulator is a effective daylighting design tool that can evaluate three dimensional performance of lighting. Especially, the dome type sky simulator offer reliable and reproducible daylighting performance with different standard sky models. Recently, K university has developed the dome type sky simulator(sky dome) with the diameter of 6.5m and the height of 3.7m. The sky dome consists of a group of 145 large steel panels with 72 halogen lamps which are arranged in a circular array. The luminance distribution of the sky dome can be calibrated by changing the angle and the brightness of the lamps respectively. To allow more reliable prediction and evaluation of daylighting through the sky dome, It is essential to validate the sky luminance distribution of the sky dome. This study consider the validation of the comparisons between the measured and the calculated luminance values for the CIE standard overcast sky. Also, the error rate between the measured and the calculated luminance values were compared to the previous studies. The results indicated that the K university sky dome can reproduce reliable CIE standard overcast sky with the average relative error rate of 4.4% and root-mean-square error(RMSE) of 5.4%.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.31-40
• /
• 2009

미국의 라스베가스, 중국의 상해와 홍콩은 많은 관광객들이 찾는 명소로 다양한 기법과 방식을 사용한 경관조명이 복합적으로 어우러져 있는 세계적으로 야경이 유명한 도시이다. 이러한 3개 도시를 대상으로 건물 야간경관조명의 조명 방식과 조명 기법을 조사하였으며, 건물의 최대 최소 벽면휘도, 부분적인 발광광고물에 대한 휘도를 측정하였다. 그리고, 현재 사용되고 있는 CIE 휘도 기준과 IES 권장 최대 휘도비에 대한 기준을 바탕으로 각 도시별, 건물별 벽면휘도의 절대값, 상대값의 비교를 통해 도시별 경관조명 특성을 분석하였다.

• KIEAE Journal
• /
• 제5권4호
• /
• pp.51-57
• /
• 2005

For the evaluating daylighting performance, field measurement, scale model test and a set of computer tools can be applied. For the scale model measurements, the sky simulator is a vital facility to represent the desired sky conditions consistently. Recently K university has developed a large size sky simulator, 6m-diameter and 3.7m-height, that is suitable for the international standard. To verify the reliability of the sky simulator, the luminance distribution on the inner sky surface was measured and compared with the CIE standard overcast sky model. It is found that the sky simulator can be reproduced the CIE standard overcast sky condition with 4.3% as mean difference. K university sky simulator is fully validated for usability and accuracy for daylighting researches.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.65-72
• /
• 2009

Lighting for outdoor advertising is very common feature of building facades as they provide the information and commercial identification. As the interest of improving street beautification more widely, application of various lighting technologies has been develop for advertisement such as electric sign board and signage. Furthermore, the installation of higher sign luminance than needed has many negative consequences, including higher energy consumption and light pollution. There are now no standard for outdoor advertisements in terms of luminance, and installation of indiscreet outdoor advertisement without luminance consideration is becoming more commonplace. This study was to evaluate the luminous characteristics of outdoor advertising as a function of sign and building facade luminance, luminance ratio. Data were collected on 8 electric sign boards, 20 internally illuminated, externally illuminated, neon, and channel letter signs and 4 commercial areas. Photometric measurements were taken by CS-100(Minolta) and ProMetric-1400(Radiant Imaging) for various sign modes and sign design. Also luminance of building facades were analyzed according with CIE standard of maximum obtrusive light permitted for exterior lighting installations. The findings are as follows; (1) There were excessive luminance of electric sign boards that could affect adjacent building facade and night sky luminance. (2) Sings that are externally illuminated providing an inappropriate amount of light on to the outer surface of the sign caused higher building facade luminance and potential of unnecessary glare.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.1-10
• /
• 2007

KH University has developed a large sky simulator which is its scale suits international standard. To verify the reliability of the sky simulator, the luminance of 36 points on the inner sky surface was measured and compared with the CIE standard overcast sky model. It was found that the sky simulator can reproduce the CIE standard overcast sky condition with 1.8[%] of mean difference. To identify the differences of daylighting performance, scale model measurements were taken under a real sky and in a sky simulator. Under overcast sky conditions, two kinds of scale model experiments were conducted by using the photometric sensor Li-cor. Firstly, a 1/20 scale model of a side-lit office room 4.9[m] wide, 7.2[m] long, and 2.6[m] high was created. Five measurement points were set at 1.2[m], 2.4[m], 3.6[m], 4.8[m], and 6.0[m] from the window. The mean difference of the light factor between the sky simulator and real sky was 7.1[%]. Secondly, a 1/30 scale model of a top-lit atrium 15[m] wide, 15[m] long, and 15[m] high was created. The measurement point was set at center of the room and the well indexes of the model were set in 5 types. The mean difference of the light factor between the sky simulator and real sky was 1.7[%]. This proved that the sky simulator is fully accurate and usable for daylighting research.

• 한국농촌건축학회논문집
• /
• 제10권3호
• /
• pp.27-34
• /
• 2008

Recently, the outdoor lighting of architectural Facade has increased for the improvement of night-scape in urban and coastal resort. The purpose of this research is to analyze lighting characteristics; Luminance, Illuminance, Color Temperature, Chromaticity in Gyengpo Park of Eastern famous coastal resort. The result of this paper is as follows: 1) The Luminance ratio was measured that compare to the 1:10 criterion(IESNA) was in excess to the most building except "K". Because of these condition, Luminance environments was injurious to visual health the overuse of the outdoor lighting or glare to the eyes. 2) The level of vertical Illuminance value was insufficient 33.3% among the cases of survey with 4Lux standard of CIE. 3) The kinds of outdoor lighting of BLDG were increased lighting emitting diode(LED), metal halide(MH) instead of reduction trend of neon, fluorescent light, halogen. As the crisis of Energy resources we will be investigate adapt method of outdoor lighting, which design is based on economical efficiency by the use of optimum lighting.

• 한국멀티미디어학회논문지
• /
• 제13권5호
• /
• pp.641-650
• /
• 2010

컬러 이미지 센서는 광전 변환을 일으키는 촬상 소자와 내부의 영상처리 과정을 거쳐서 컬러 이미지를 출력한다. 일반적으로 출력 영상은 원 피사체의 XYZ 3 자극치와 카메라 RGB 출력 신호 사이의 변환 관계인 카메라 전달 특성에 의해 결정된다. 본 논문에서는 컬러 이미지 센서의 내부 조정 항목인 노출-증폭-레벨(shutter-gain-level, SGL)의 특성함수와 자동 화이트 밸런스 상태를 이용한 카메라 전달 행렬을 이용하여 영상의 colorimetry(측색) 상태를 분석하는 기법을 제안한다. 제안 방법으로부터 실제 영상물의 색도와 휘도 등을 예측할 수 있다. 연구에 사용된 컬러 이미지 센서의 AE(auto exposure) 상태와 실제 휘도의 관계를 정량화하여 SGL 함수를 유도하여 영상의 휘도를 예측 한다. 그리고 영상의 색도는 최소 제곱 다항식 모델링 (polynomial modeling)을 이용하여 기준 환경에서 얻은 카메라 전달 행렬과 AWB(auto white balance) 상태를 통해 예측한다. 실험을 통해서 컬러 이미지 센서를 이용한 제안된 영상의 색도와 휘도 예측 기법의 성능이 우수함을 볼 수 있고, 예측된 결과는 실제 영상물 계측과 시청 환경 측정을 이용한 디스플레이 화질 설정 시스템, 보안 등의 다양한 분야에서 응용이 가능하다.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.923-929
• /
• 2023

This study investigated the optical characterization of water types based on Jerlov's classification, employing the CIE colorimetric system. Digital visualization techniques were applied to articulate watercolor manifestations intuitively. The L^* luminance parameter exhibited a discernible reduction from optical water type I III and from type 1 to 9, registering a range between 66 and 84. Analysis of color attributes in each optical water type revealed that in the transition from type I to III, the color a^* values spanned from -7.43 to -8.32, while color b^* values ranged from -2.97 to -3.33. a^* values for optical water types 1 to 9 varied between -6.28 and -10.50, with corresponding b^* values ranging from -2.51 to -4.20. Consequently, optical water type I, IA, IB, II, and III were discretely categorized by independent color values, as were optical water types 1, 3, 5, 7, and 9. The digitized representation of watercolor in this inquiry facilitated comprehensive information asso,o;atopm. The study highlights limitations in Jerlov's classification for representing watercolors in different ocean conditions. It emphasized the need to collect color data from various marine areas and formulate a novel color standard or method for comparing colors.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.68-83
• /
• 2020

This study suggests a method to predict the color appearance of textiles that shifts depending on illumination variations. The suggested method allows the calculations of lightness, chroma, and hue appearance values from the spectral reflectance values of the textile and illuminant. The accuracy of the method was evaluated through numerical and statistical comparisons between the predicted and the measured color appearance values of 24 fabric samples under CIE standard illuminant D65. As a result, there were excellent agreements between the two data sets with the error values close to zero. The predicted color appearance values of 24 samples under two illuminating (color temperature-luminance) conditions, 2700 K-100 cd/㎡ and 6500 K-100 cd/㎡, were then compared to prove the significant effect of illumination on the color appearance of textiles. The color appearance values were also compared with spectrophotometrically measured physical color attributes, that is, true colors of the samples. The physical color attributes of samples were unchanged; however, differences in color appearance under different conditions were generally much larger than the suprathreshold color difference tolerances discussed in the color science literature. Finally, the magnitude of the illumination effect depending on the physical color attributes of samples was also analyzed.