• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.794-798
• /
• 2001

$Y_{2-x}SiO_5:Ce_x^{3+}$(x=0.002∼0.04) phosphors were prepared by sol-gel process, amorphous crystal phase was observed in calcining dry gel at 800$^{\circ}$C, but pure $X_2$ type of type $Y_2SiO_5$ phase appeared from heat treatment above 1000$^{\circ}$C. Light absorption of tye $Y_2SiO_5$ host lattice occurred at 230∼360nm, and light absorption of the $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors was observed at 300∼400nm in adding $Ce^{3+}$. $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors showed maximum emission shoulder at 436nm. Maximum CL intensities of $Y_{2-x}SiO_5:Ce_x^{3+}$ were observed in adding 0.025 $Ce^{3+}$ and the phosphor showed x=0.161, y=0.124 in color coordinate of CIE1931.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2011

Purpose: The purpose of this study was to evaluate the influence of porcelain re-firing on the formation of surface bubble and on the change in shade of metal-ceramic crown exposed to artificial saliva. Materials and methods: Thirty disk-shaped specimens were made in 10 mm diameter with 0.5 mm metal core thickness and 1 mm ceramic thickness. A spectroradiometer was used to determine the CIE Lab coordinates. The number and size of surface bubble were observed with a stereomicroscope. After the exposure to artificial saliva for 7 days, re-firing was performed at glazing temperature. After re-firing, the CIE Lab were calculated, and the number and size of surface bubble were observed again. The change in shade was expressed with ${\Delta}E$. Statistical analysis was done with paired t-test for the change in the number of surface bubble and student t-test for the change in the size of surface bubble (${\alpha$}=0.05). Results: Shade difference was calculated 2.14 ${\Delta}E$ units. The mean number of surface bubble was $1.33{\pm}1.49$ before re-firing, $3.27{\pm}2.90$ after re-firing. After re-firing, the number of surface bubble was significantly increased (P<.05). The mean size of surface bubble was $81.97{\pm}32.03\;{\mu}m$ before re-firing, $142.94{\pm}47.40\;{\mu}m$ after re-firing. After re-firing, the size of surface bubble was significantly increased (P<.05). Conclusion: Shade change after re-firing was perceptible (${\Delta}E$ < 2.0) and clinically acceptable (${\Delta}E$ < 3.7). The number and size of surface bubble was significantly increased after re-firing. Further investigation to decrease the surface bubble on the extra oral repair of metal-ceramic crown, will be needed in future study.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.21-28
• /
• 2013

This paper proposes an effective fire detection approach that includes the following multiple heterogeneous algorithms: moving region detection using grey level histograms, color segmentation using fuzzy c-means clustering (FCM), feature extraction using a grey level co-occurrence matrix (GLCM), and fire classification using support vector machine (SVM). The proposed approach determines the optimal threshold values based on grey level histograms in order to detect moving regions, and then performs color segmentation in the CIE LAB color space by applying the FCM. These steps help to specify candidate regions of fire. We then extract features of fire using the GLCM and these features are used as inputs of SVM to classify fire or non-fire. We evaluate the proposed approach by comparing it with two state-of-the-art fire detection algorithms in terms of the fire detection rate (or percentages of true positive, PTP) and the false fire detection rate (or percentages of true negative, PTN). Experimental results indicated that the proposed approach outperformed conventional fire detection algorithms by yielding 97.94% for PTP and 4.63% for PTN, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.213-222
• /
• 2017

Heat treatment of wood is an attractive alternative environmentally-friendly treatment to add value of less valuable woods by improving color, dimensional stability, and natural durability. To improve the color properties of Korean white pine (Pinus koraiensis) and royal paulownia (Pauwlonia tomentosa), we treated the woods at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$, and $220^{\circ}C$ for 2 hours. Color change after heat treatment was evaluated using the CIE-Lab color system and survey was conducted to determine the consumer preferences towards color of heat-treated wood. Lightness ($L^*$) decreased with increasing temperature and the higher degree of change was obtained in royal paulownia. The red/green chromaticity ($a^*$) in both wood decreased after heat treatment at $160^{\circ}C$, and constantly increased after heat treatment at $180^{\circ}C$ to $220^{\circ}C$. Yellow/blue chromaticity ($b^*$) in Korean white pine tended to increase after heat treatment at $160^{\circ}C$, then decreased gradually afterwards. In royal paulownia, $b^*$ values linearly increased with increasing temperature. Overall color change (${\Delta}E^*$) increased with increasing temperature with higher degree obtained in royal paulownia. Samples with the clamps in both wood species showed lower degree of the change in $L^*$, $a^*$, b and ${\Delta}E^*$. The results of the consumer preferences test showed that the darker colors of heat-treated woods were more preferred by consumers compared to the lighter colors of untreated woods. Consequently, heat treatment could enhance the color properties of Korean white pine and royal paulownia woods for value added products.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.2
• /
• pp.117-122
• /
• 2014

On previous studies, we constructed a transgenic silkworm which produces the chimeric silk fused green fluorescent protein (EGFP), but the transgenic silkworm has decreased commercial feasible traits such as convenience of breeding and productivity of silk. In this study, we performed cross fertilization between green fluorescent silk transgenic silkworm and colored cocoon silkworm descents to make the transgenic the transgenic silkworm producing improved fluorescence cocoon. In the result, we found out a bit valuable cross fertilization manners ($female{\times}male$) in respect of silk productivity such as $T59B{\times}Jam26$, $Jam329{\times}T59W$, $T59W{\times}Jam329$, and $T59W{\times}Jam178$. The color-difference of offspring cocoons were measured according to different cross manners using by CIE Lab-based formulae with a X-rite VS450. In the result, the depth of green color of cocoons was a little high at cross manners as $Jam329{\times}T59W$, $T59W{\times}Jam178$. Meanwhile, the depth of yellow clolor of cocoons was remarkable at cross manners as $Jam178{\times}T59W$, $T59W{\times}Jam178$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.105-109
• /
• 2005

We heat treated pure sapphire samples at $1800^{\circ}C{\sim}100$ hours in BeO-${Al_2}{O_3}$ powder by varying BeO contents of $5{\sim}50\;wt%$ in order to quantify the BeO diffusion enhancement for corundum gem stones. We investigated the heat treated samples with visual evaluation, color coordination analysis, and surface roughness measurement. We confirmed that $Be^{2+}$ ions did not lead to orange color but to dark gray. The lightness in CIE Lab index decreased while surface roughness increased rapidly as BeO contents increased. We propose that BeO yellow color enhancement may be feasible only for $Fe^{3+}$ rich blue sapphires and sub-5% BeO content be appropriate to shorten post re- cutting process.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.450-455
• /
• 2016

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.1-10
• /
• 2016

A system which provides multispectral near-IR and visible gray images of objects is constructed and an algorithm is derived to acquire a natural color image of objects from the gray images. A color image of 24 color patches is obtained by recovering their CIE (International Commission on Illumination) LAB color coordinates $L^*$, $a^*$, $b^*$ from their gray images using the algorithm based on polynomial regression. The system is composed of a custom-designed LED illuminator emitting multispectral near-IR illuminations, fluorescent lamps and a monochrome digital camera. Color reproducibility of the algorithm is estimated in CIELAB color difference ${\Delta}E^*_{ab}$. And as a result, if yellow and magenta color patches with around 10 ${\Delta}E^*_{ab}$ are disregarded, the average ${\Delta}E^*_{ab}$ is 2.9, and this value is within the acceptability tolerance for quality evaluation for digital color complex image.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.302-307
• /
• 2010

This study aims to synthesize emerald-green malayaite pigments using $CaCO_3$, $SiO_2$, $SnO_2$ and $V_2O_5$. For this purpose, the optimum composition is $CaV_{0.25}Sn_{0.687}SiO_5$ and heating condition is at $1250^{\circ}C$ for 6 h of soaking time. The samples were characterized by X-ray diffraction (XRD), the Fourier Transform Infrared Spectrometers(FT-IR), the Raman Spectrometer, Scanning Electron Microscope(SEM) and the UV/Vis spectroscopy. The substituted V ion for Sn was observed to be quadrivalence. The analytical results of the synthesized pigment showed the tetragonal crystal, a typical form of Malayaite, and the particle size to be approximately $5{\sim}10\;{\mu}m$. The color in lime glaze added 12 wt% pigment was emerald green, and CIE Lab parameters are $L^*=67.73$, $a^*=-12.39$ and $b^*=9.28$.