• Geomechanics and Engineering
• /
• 제6권3호
• /
• pp.249-262
• /
• 2014

Tire chips and tire chips-soil mixtures can be used as alternative fill material in many civil engineering applications. In this study, the potential benefits of using tire chips as lightweight material to improve the bearing capacity and the settlement behavior of sand slope was investigated experimentally. For this aim, a series of direct shear and model loading tests were conducted. In direct shear tests, the effect of contents of the tire chips on the shear strength parameters of sand was investigated. Different mixing ratios of 0, 5, 10, 15 and 20% by volume were used and the optimum mixing ratio was obtained. Then, laboratory model tests were performed on a model strip footing on sand slope reinforced with randomly distributed tire chips. The loading tests were carried out on sand slope with relative density of 65% and the slope angle of $30^{\circ}C$. In the loading tests the percentage of tire chips to sand was taken as same as in direct shear tests. The results indicated that at the same loading level the settlement of strip footing on sand-tire chips mixture was about 30% less than in the case of pure sand. Addition of tire chips to sand increases BCR (bearing capacity ratio) from 1.17 to 1.88 with respect to tire chips content. The maximum BCR is attained at tire chips content of 10%.

• 통상정보연구
• /
• 제8권4호
• /
• pp.71-88
• /
• 2006

This article want to discuss on comparative research between CHIPS and Fedwire as the cross-border payment systems which America have and use at present. CHIPS is a New York-based automated private-sector clearing facility for large-dollar transfers. It is a central switch communication and settlement system whose 53 participating banks exchange same-day payment messages over dedicated communication lines linking each one to the CHIPS central computer. On January 22, 2001, CHIPS introduced immediate finality for payment released from the CHIPS queue. Unlike the Fedwire system, The CHIPS system is not a real-time gross settlement system. Instead, CHIPS is hybrid system that uses a computer program to select payment order in a queue for release to the receiving bank. CHIPS are governed by CHIPS Rules and Administrative Procedures. Fedwire system is a nationwide electronic fund-transfer system facilitating same-day transfers throughout the United States. It is a gross settlement system providing immediate credit to the receiving bank's master account. Communicating between a Federal Reserve Bank and Fedwire users can be either on-line or off-line. Fedwire transfers are governed by Subpart B of Regulation J, issued by the Federal Reserve Board, which incorporates U.C.C. Article 4A but preempts or supersedes any of its inconsistent provisions.

• 한국산림과학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1963

1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

• 한국환경복원기술학회지
• /
• 제11권4호
• /
• pp.119-128
• /
• 2008

In this study, we attempted to seek out the ways to recycle fresh root-chips in the slope revegetation works by breaking tree root wastes occurring during the construction works, also to review the applicability of fresh root-chips as the soil media in slope revegetation works. For this purpose, we organized test units in order to investigate on-site applicability of fresh root-chips (broken chips). In order to examine the desirable ration of combining fresh root-chips with the hydroseeding soil media on the cutting slopes, we organized test units depending on the amount of combination. The following is the main experimental results. 1. At first, we analyzed properties of hrdro-seeding soil media and soil of the experimental sites. The overall results demonstrate that all the test units show proper range for vegetation. 2. We believe that the physical properties of soils in the earlier phase of restoration works on the sloped sites are not greatly affected by the fact whether broken chips exist or not. However, as time elapses, broken chips needs to be investigated further on what kind of impact they have on the soil condition. 3. More species are found in the test unit combining broken chips and we believe that it will contribute to blossoming of green plants and ecological succession of neighboring plants. 4. We performed experiment on possibility for fresh root-chips as substitutes for the hydro-seeding soil-media. In the test unit that combines fresh root-chips, its mixture ratio tends to exceed that of the test unit that does not combine fresh root-chips by 5 %. In case of the Thick-Layer-Soil-Media Hydroseeding works, the mixture ratio of the test unit that combines fresh root-chips after 16 weeks exceeds that of the test unit that does not combine fresh root-chips by 75%. 5. From the result of our experiment, it is obvious that the ratio of mixture and the number of emerging species are higher for the test unit combining fresh root-chips than the test unit that does not combine them. In other words, we can replace the hydro-seeding-soil-media with some Fresh root-chips without affecting the physical property of soil.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.85-89
• /
• 2009

Reflow process conditions were investigated for 0402 electric parts with Sn-3.0Ag-0.5Cu solders. Circle hole shape metal mask with 100 m thickness showed excellent printability. Self alignment abilities were 71% for 1005 chips, 52% for 0603 chips, and 3% for 0402 chips. Average joining strengos were 1990 gf for 1005 chips, 867 gf for 0603 chips, and 525 gf for 0402 chips. As mis-mounting angle increased, joining strength decreased. Considering self-alignment ability, mounting angle had to be under $5^{\circ}$ and contact area of the chips had to be over 40% for Pb-free soldering process for 0402 chips.

• 아시안잔디학회지
• /
• 제16권1호
• /
• pp.19-30
• /
• 2002

경직된 지반의 물리성 개선재로서 rubber chip의 토양 내 혼합 또는 배토는 잔디의 생육과 지반의 이·화학성 및 중금속 추출 실험을 통하여 다음과 같은 결론을 얻었다. Rubber chip의 토양 내 혼합은 지면의 온도 상승효과를 가져왔으며 이는 겨울철의 동해방지 및 맹아출현기를 앞당길 수 있을 것이라 추정된다. 그러나 복사열이 높은 여름에는 rubber chip에 의한 표면, 지중 온도의 상승으로 잔디의 피해가 우려된다. 또한 토양 내에 rubber chip의 혼합함량(rubber chip 20%, 40%)이 많을수록 잔디의 발아와 생육 및 피복에 부정적인 영향을 끼쳤다. Rubberchip의 토양혼합은 지반의 이·화학성 변화에 크게 작용하지 않았으며 중금속 추출실험에서도 차이를 나타내지 않아 토양환경 오염이 없을 것으로 판단된다. Rubber chip을 배토용 재료로서 사용했을 경우, 경직된 토양구조를 개선시켜 주었다. 특히 통기작업 후 rubber chip의 배토는 지반의 표면탄성을 현저히 완화시켰다. 따라서 현재 우리나라에서 보수중이 거나 건설중인 연습구장, 보조구장에 재활용이 가능한 폐타이어 rubber chip을 지반 답압 개선용, 배토용 재료로서 사용이 가능할 것으로 판단된다.

• Preventive Nutrition and Food Science
• /
• 제8권2호
• /
• pp.179-184
• /
• 2003

The use of high amylose maize varieties significantly affected the alkaline-cooking process and characteristics of alkaline-processed food products, such as masa and tortilla chips. High amylose maize varieties had softer endosperm textures with move tightly attached pericarps than normal maize. Masa prepared from high amylose mutant maize was less cohesive than that of normal maize due to insufficient dispersion of amylopectin and excessive retrogradation of starches. Tortilla chips prepared from amylose-extender dull (ae du), amylomaize V, and Ⅶ had slightly increased oil absorption, while tortilla chips from dull (du) and amylose-extender sugary-2 (ae su-2) had oil contents similar to that of control chips. Increased oil absorption of the tortilla chips was due to their increased surface area. Tortilla chips produced from high amylose mutant maize had darker color than control chips, presumably due to the pigmented pericarp tissues, higher levels of reducing sugars, and phenolic compounds present in the kernel.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.22-27
• /
• 2010

Pulping properties of the imported mixed eucalyptus chips and the domestic yellow poplar chips were investigated for comparing two chips as the raw materials for the hardwood chemical pulp. Soda-AQ (anthraquinone) pulping was applied for this study. The pulp from yellow poplar showed higher pulp yield than pulp from mixed eucalyptus, which comes from the lower hot-water soluble extractives and the higher polysaccharides in yellow poplar chips than those of the mixed eucalyptus chips. The yellow poplar pulp had higher average fiber length and fiber width than those of the mixed eucalyptus pulp, which led to the better respond to beating and the higher tear strength than those of the pulp from the mixed eucalyptus chips.

• 한국환경복원기술학회지
• /
• 제13권1호
• /
• pp.47-56
• /
• 2010

The main objectives of this comparative study were 1) to quantify the potential contribution of wood chips to revegetation on the cut slope in a constructed area, 2) to compare the floristic similarity of species composition whether existing of wood chips in the soil media or not. Wood chips were combined with soil media in the ratio of 30%. The thin layer (1 cm, 3 cm) soil media revegetation methods and the thick layer (10 cm) soil media revegetation method were constructed on the cut slopes by machineries respectively. Also, comparative experiments the existence of wood chips in the soil media were conducted to evaluate the effects of wood chips on revegetation works. The total size of quadrat was $300m^2$ ($100m^2{\times}3$). The results of monitoring for 3 years on cut slopes were as follows: 1) All the quadrat existed in the proper range for vegetation. 2) Species richness of quadrat including wood chips was 10% more than those of commercial soil medias. 3) The coverage rates of quadrat including wood chips were similar or superior to those of conventional methods. It can be concluded that the use of wood chips would be effective to promote establishment of diverse landscape and vegetation. However, it behooves to continue monitoring on succession of vegetation for ecological restoration. Finally, adequate wood chips deposit and gathering methods should be studied properly.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.23-29
• /
• 2010

메모리칩의 제조 과정에서 발생하는 불량 칩 중 한 두개 비트의 결함이 있는 여러 개의 칩들을 모아서 정상 동작하는 메모리 시스템을 구성하는 방법을 제시한다. 여기에서 제시하는 메모리 시스템은 여러 개의 결함 있는 메모리칩을 겹쳐 쌓은 3차원 다층 구조를 가진다. 이들 칩 간의 신호 선은 through silicon via (TSV)를 통하여 연결한다. 각 칩의 결함이 있는 메모리 셀이 포함된 구역이 칩 마다 서로 다르도록 칩을 분류하여 선택한다. 이 메모리들의 결함이 없는 셀 구역만을 모아 조합하여 전체가 결함이 없는 메모리 시스템이 되도록 한다. 독립적인 주소지정 가능한 n 개의 storage block을 가진 메모리 각각에 k 개의 결함 있는 storage block이 있는 경우 k+1 개의 여유 칩이 조합되어야 한다.