• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.43-48
• /
• 2002

Semiconductor chip encapsulation process is employed to protect the chip and to achieve optimal performance of the chip. Expert decision-making to obtain the appropriate package design or process conditions with high yields and high productivity is quite difficult. In this paper, an expert system for semiconductor chip encapsulation has been constructed which combines a knowledge-based system with CAE software.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.22-27
• /
• 1993

The finite element method is applied to analyze the mechanism of metal cutting. This paper introduces some effects, such constitutive deformation laws of workpiece material, friction of tool-chip contact interfaces, tool rake angles and also simulate the cutting process, chip formation and geometry, tool-chip contact, reaction force of tool, cutting temperature. Under the usual [lane strain assumption, quasi-static analysis were performed with variation of tool-chip interface friction coefficients and rake angles. In this analysis, various cutting speeds and depth of cut are adopted. Some cutting parameters are affected to cutting force, plastic deformation of chip, shear plane angle, chip thickness and tool-chip contact length and reaction forces on tool. Cutting temperature and Thermal behavior. Several aspects of the metal cutting process predicted by the finite element analysis provide information about tool shape design and optimal cutting conditions.

• 한국정밀공학회지
• /
• 제2권2호
• /
• pp.6-10
• /
• 1985

최근, 절삭가공 기술의 향상으로 공작기계의 자동화, 수치제어화가 되어 감에 따라 절삭가공 할때 생성되는 chip을 이용하게 처리할 수 있는 방법을 강구하는 것이 중요한 문제점으로 부각되고 있다. 절삭기계공장의 생산능률 및 합리화를 추진함에는 Chip의 원활한 처리법이 병행되지 않고는 단순히 공작기계의 개발, 개량만으로 해결되지 않는다고 본다. 절삭가공할 때 생성된 긴 chip이 공구와 공작물등에 감겨서 기물을 손상시킬 뿐만 아니라 Chip의 열로 인하여 공작물 또는 기계가 열변형을 받게 되는 경우가 있으므로 작업을 중지시켜서 작업원이 Chip 을 제거해야 할 번거러움 이 있다. 그러므로 chip 처리에 대한 연구보고는 Henriksen시대에서부터 시작하여 현재까지 많은 보고가 있다. 일반적으로 연속형 chip을 세단하는 방법으로는 불연속형 Chip법, 단속절삭법, 자동 절단촉진법 및 절단공구법으로 구분된다.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.106-112
• /
• 1998

A major problem in automation of turning operations is the difficulty in obtaining a sufficient and reliable chip control. The chip should be detected in order to provide a optimum chip control for unmanned turning operation. Using the difference of energy radiated from the chip, chip Patterns are estimated using pyrometer. From the initial output from the pyrometer, chips are identified according to the backpropagation algorithm developed in the research. The learning system developed in this work can be applied in real-time control of turning process with minor modification in drive system.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권2호
• /
• pp.23-27
• /
• 2001

Microarray-based DNA chips provide an architecture for multi-analyte sensing. In this paper, we report a new approach for DNA chip microarray fabrication. Multifunctional DNA chip microarrays were made by immobilizing many kinds if DNAs on transducers (particles). DNA chip microarrays were prepared by randomly distributing a mixture of the particles on a chip pattern containing thousands of micro meter-scale sites. The particles occupied different sites from array to array. Each particle cam be distinguished by a tag that is established on the particle. The particles were arranged on the chip pattern by the random fluidic self-assembly (RFSA) method, using hydrophobic interaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.838-841
• /
• 2005

DNA Chip is able to show DNA-Data that includes diseases of sample to User by using complementary characters of DNA. So this paper studied Neural Network algorithm for Image data processing of DNA-chip. DNA chip outputs image data of colors and intensities of lights when some sample DNA is putted on DNA-chip, and we can classify pattern of these image data on user pc environment through artificial neural network and some of image processing algorithms. Ultimate aim is developing of pattern classifying algorithm, simulating this algorithm and so getting information of one's diseases through applying this algorithm. Namely, this paper study artificial neural network algorithm for classifying pattern of image data that is obtained from DNA-chip. And, by using histogram, gradient edge, ANN and learning algorithm, we can analyze and classifying pattern of this DNA-chip image data. so we are able to monitor, and simulating this algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.115-118
• /
• 2002

This paper presents the design method and performance characteristics of a chip-type quadrature hybrid using LTCC-MLC technology. The design method for a chip-type quadrature hybrid is based on lumped element equivalent circuit of quarter-wave transformer. The chip-type quadrature hybrid was miniaturized to a greater extent using multilayer structure and lumped element. The proposed design method can also reduce the undesirable parasitic effects of the chip-type quadrature hybrid. The proposed chip-type quadrature hybrid was designed and fabricated using the proposed design method and the equivalent circuit model of a quarter-wave transformer. Fabrication and measurement of designed chip-type quadrature hybrid show much smaller size than a conventional distributed quadrature hybrid and a good agreement with simulated results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.577-580
• /
• 2003

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along single of several shear surfaces. separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests new approach to the constriction of slip-line field, which Implies uniform compression in chip formation zone. On the base of given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination have been considered. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model could be useful in solution of various problems of machining.

• 한국정밀공학회지
• /
• 제5권4호
• /
• pp.32-38
• /
• 1988

Apaptive cintrol of machine tool is aimed to change cutting state satis- factorily without aid of a machine operator, if the cuting state is abnomal such as formation of tangled ribbon type chip, built-up edge and generation of chattering and so on. Among these the recognition of chip type is one of the most important since it has imlications relate to : 1. Safety of operator 2. Stoppage of work due to entanglment in tool and workpiece of chip 3. Problem of producted chip control In this paper the chip type is discriminatied by the pattern recognition technique. It is found that the power spectrum of cutting force for each chip type has it's own special pattern. Linear discriminant function for the recognition of the chip type is obtained by learning process. The discriminant function can be the basis of adaptive control for the rate of success of recognition by pattern recognition technique is at leasthigher than 83%.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.609-615
• /
• 1995

Chip machining에 의한 U$_3$Si 분말제조시 절삭가공조건이 분말 입도 분포에 미치는 영향을 조사하기 위하여 U$_3$Si ingot를 선반에서 초경공구를 사용하여 절삭속도 및 이송속도를 변화시키면서 chip을 가공하였고, 가공된 chip의 형상을 광학현미경으로 관찰하고 칩의 크기를 측정하였다. 모든 절삭조건에서 톱니모양의 칩(saw toothed chip)이 형성되었으며, 일정한 절삭속도에서 공구의 이송속도를 변화시켰을 때 이송속도가 증가함에 따라 칩 두께의 증가와 함께 chip segment의 폭도 증가하여 chip segment 의 크기가 뚜렷이 증가함을 보였다. 또한 chip segment의 크기는 절삭속도 보다는 공구의 이송속도에 크게 영향을 받는 것을 알 수 있었고 분말의 입도 분포에도 크게 영향을 미치는 것으로 나타났다.