• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.675-680
• /
• 1997

반구형 간극에서 히터 출력이 임계열유속(CHF)에 이르렀을 때 히터표면의 온도 변화와 CHF 값을 측정하였다. 반구형 히터의 직경은 498mm 이고 간극은 1, 2mm 에서 실험을 수행하였다. 히터표면의 온도는 항상 간극상단의 특정 부분에서부터 증가하기 시작하였다. 즉, 이곳에서 국부적인 dryout이 발생한 것으로 판단된다. 히터의 열속이 증가함에 따라 dryout 부분은 원주방향과 아래방향으로 확장되었다. 한편 임계열유속보다 작은 열속에서는 dryout 영역이 변하지 않는 정상상태가 존재하였으나 임계열유속에서는 열속이 고정되어 있어도 dryout 영역이 스스로 확장되어 나갔다. 이 실험은 계속 진행중이며 현재까지 측정된 CHF 값을 제시하였다. CHF 값은 간극을 대상으로 개발된 기존의 실험식보다 낮게 측정되었다.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.26-32
• /
• 1988

This study was performed to construct killer wine yeasts which might suppress the growth of wild yeasts, reduce the consumption of starter and condense the fermentation period. Saccharomyces cerevisiae M524, a commercial wine yeast, was treated with N-methyl-N'-nitro-N-nitrosoguanidine to induce auxotrophic mutants, i.e., CHM $2(thr^-)$, CHM 3 $(asp^-)$ and CHM 6 $(tyr^-)$. These auxotrophs were fused successfully with a killer yeast, S. cerevisiae $1368R({\alpha}\;his\;4\;kar\;1-1(kil-k)\;(k_0)$, respiratory deficient) using sphoroplast techniques and the fusants were designated as CHF 21$(th^-\;kil^+)$, CHF 22$(thr^-\;kil^+)$, CHF 31$(asp^-\;kil^+)$ and GHF 61$(tyr^-\;kil^+)$. Combined cultivation of CHF 31 with 1368R or S. cerevisiae $5{\times}47$ (killer sensitive) proved out that CHF 31 had the characteristic of killing and produced the same amount of ethanol as the prototroph, M524.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.41-43
• /
• 1999

Among the feffoelectric thin films that have been widely investigated for ferroelectric random access memory (FRAM) applications, SrBi$_2$Ta$_2$$O_{9}$ thin film is appropriate to memory capacitor materials for its excellent fatigue endurance. However, very few studies on etch properties of SBT thin film have been reported although dry etching is an area that demands a great deal of attention in the very large scale integrations. In this study, the a SrBi$_2$Ta$_2$$O_{9}$ thin films were etched by using magnetically enhanced inductively coupled Ar/CHF$_3$ plasma. Etch properties, such as etch rate, selectivity, and etched profile, were measured according to gas mixing ratio of CHF$_3$(Ar$_{7}$+CHF$_3$) and the other process conditions were fixed at RF power of 600 W, dc bias voltage of 150 V, chamber pressure of 10 mTorr. Maximum etch rate of SBT thin films was 1750 A77in, under CHF$_3$(Ar+CHF$_3$) of 0.1. The selectivities of SBT to Pt and PR were 1.35 and 0.94 respectively. The chemical reaction of etched surface were investigated by X-ray photoelectron spectroscopy (XPS) analysis. The Sr and Ta atoms of SBT film react with fluorine and then Sr-F and Ta-F were removed by the physical sputtering of Ar ion. The surface of etched SBT film with CHF$_3$(Ar+CHF$_3$) of 0.1 was analyzed by secondary ion mass spectrometer (SIMS). Scanning electron microscopy (SEM) was used for examination of etched profile of SBT film under CHF$_3$(Ar+CHF$_3$) of 0.1 was about 85˚.85˚.˚.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.439-445
• /
• 2021

In view of the complex geometric structure of the rod bundle channel and the limitation of the current CHF visualization experiment technology, it is very difficult to obtain the rod bundle CHF mechanism directly through the phenomenon of the rod bundle CHF visualization experiment. In order to obtain the applicable CHF mechanism assumption for rod bundle channel, firstly, five most representative DNB type round tube CHF mechanistic models are obtained with evaluation and screening. Then these original round tube CHF mechanistic models based on inlet conditions are converted to local conditions and coupled with subchannel analysis code ATHAS. Based on 5 × 5 full-length rod bundle CHF experimental data independently developed by Nuclear Power Institute of China (NPIC), the applicability research of each model for CHF prediction performance in rod bundle channel is carried out, and the commonness and difference of each model are comparatively studied. The CHF mechanism assumption of superheated liquid layer depletion that is most likely to be applicable for the rod bundle channel is selected and two directions that need to be improved are given. This study provides a reference for the development of CHF mechanistic model in rod bundle channel.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1512-1517
• /
• 2003

Augmentation of CHF by ultrasonic is experimentally studied under subcooling pool boiling condition. Experiment is carried out for downward-facing plate with and without the ultrasonic. The working fluid is distilled water. Experimental apparatus is composed of a bath, power supply, test section, ultrasonic generator, DAQ system. Experiment is performed with the subcooling temperature of $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$ and the inclined angle of $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $45^{\circ}$, 90. From the experimental results, it is found that ultrasonic effect enhances CHF of the downward-facing plate. As increasing the degree of subcooling, the rate of CHF increase is enhanced. As increasing the inclined angle, the rate of CHF increase decreases. Also, we can see that the heat transfer mechanism of CHF augmentation is closely connected with the dynamic behavior of bubble generation and departure.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2578-2582
• /
• 2008

In predicting the critical heat flux (CHF) in pool boiling systems, the contact angle between the boiling surface and the liquid and the surface roughness are considered to be the important parameters. From the microscopic viewpoint, those are affected by the micro/nano structure of the surface. Several studies have been reported on the dependence of CHF on the surface microstructure such as height and width of the cavities and distances between them. In this paper, the effects of the boiling surface characteristics on CHF are reviewed and the future research issues are discussed for better prediction of CHF.

• Nuclear Engineering and Technology
• /
• v.38 no.8
• /
• pp.753-762
• /
• 2006

In this paper, works related to enhancement of the CHF are reviewed in terms of fundamental mechanisms and practical applications. Studies on CHF enhancement in forced convection are divided into two categories, CHF enhancement of internal flow in tubes and enhancement of CHF in the nuclear fuel bundle. Methods of enhancing the CHF of internal flows in tubes include enhancement of the swirl flow using twisted tapes, a helical coil, and a grooved surface; promotion of flow mixing using a hypervapotron; altering the characteristics of the heated surface using porous coatings and nano-fluids; and changing the surface tension of the fluid using additives such as surfactants. In the fuel bundle, mixing vanes or wire wrapped rods can be employed to enhance the CHF by changing the flow distributions. These methods can be applied to practical heat exchange systems such as nuclear reactors, fossil boilers, fusion reactors, etc.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.343-348
• /
• 1996

한국원자력연구소에서는 광범위한 열유동조건에서 CHF 실험을 수행하기 위해 고온, 고압으로 운전할 수 있는 RCS 열수력 Loop를 제작하고 기초 실험자료를 얻기 위해 환상 유로에서 CHF 측정실험을 수행하였다. 실험은 압력 1.82Mpa, 질량유속 300~566kg/$m^2$.s Test Section입구 Subcooling 18$^{\circ}C$ 및 47$^{\circ}C$의 범위에서 수행되었다. CHF 실험자료와 Doerffer의 CHF 상관식을 비교한 결과 상관식은 실험치 보다 최고 160% 크게 예측하였고 Doerffer 상관식은 저유량 영역에서 적용이 어려워질 것으로 예상되었다. 따라서 저유량 영역의 체계적인 CHF 실험자료가 필요하다.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.721-733
• /
• 2020

In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.13-21
• /
• 2008

In this study a method to predict CHF(Critical heat flux) in vertical round tubes with axially non-uniform cosine heat flux distribution for water was examined. For this purpose a local condition hypothesis based CHF prediction correlation for uniform heat flux in vertical round tubes for water was developed from 9,366 CHF data points. The local correlation consisted of 4 local condition variables: the system pressure(P), tube diameter(D), mass flux of water(G), and 'true mass quality' of vapor($X_t$). The CHF data points used were collected from 13 different published sources having the following operation ranges: 1.01 ${\leq}$ P (pressure) ${\leq}$ 206.79 bar, 9.92${\leq}$ G (mass flux) ${\leq}$ 18,619.39 $kg/m^2s$, 0.00102 ${\leq}$ D(diameter) ${\leq}$ 0.04468 m, 0.0254${\leq}$ L (length) ${\leq}$ 4.966 m, 0.11 ${\leq}$ qc (CHF) ${\leq}$ 21.41 $MVW/m^2$, and -0.87 ${\leq}X_c$ (exit qualities) ${\leq}$ 1.58. The result of this work showed that a uniform CHF correlation can be easily extended to predict CHF in axially non-uniform heat flux heater. In addition, the location of the CHF in axially non-uniform tube can also be determined. The local uniform correlation predicted CHF in tubes with axially cosine heat flux profile within the root mean square error of 12.42% and average error of 1.06% for 297 CHF data points collected from 5 different published sources.