• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.217-222
• /
• 2003

This study was carried out to investigate the geotechnical characteristics and field application of soil mixed with waste lime. Waste lime used in this study is producted as a by-product in the manufacturing process of making Na$_2$CO$_3$from local chemical factory in Incheon. Currently about 320 milton tons of waste lime are accumulated and annually 100,000 tons are producted. In this study, feasible use of waste lime mixed with granited whathered soil, clay, crushed rock was invesigated through laboratory tests including specific gravity test, sieve analysis, hydrometer analysis, compaction test, CBR test. Field investigations were conducted on the road construction site in Incheon.

• Journal of Korean Institute of Industrial Engineers
• /
• v.3 no.2
• /
• pp.41-55
• /
• 1977

The physical distribution system is composed of all the activities associated with getting products from the factory to the consumer through the firm's channels of distribution. An increasing amount of attention has been recently devoted to the component problems associated with distribution system analysis. This paper analyzes effect of system parameters which are safety factor of depot's stock, limitation of direct supply from shop stock to customer and ordering quantity on the physical distribution cost and the evaluated items by the Simulation. The distribution system simulator views system as being composed of three structural entities, presents a case study of a Chemical manufactures and carried on one year computer running.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.501-506
• /
• 2001

An experimental study was carried out to investigate recycling of an oyster shell, which is disposed in open-dumped way at coastal oyster factory area. For this purpose, the chemical component and reaction of oyster shell with cement paste was examined. And, the characteristics of hardened concrete was quantitatively investigated in terms of fineness modulus and blending rate of the crushed oyster shell. Test results show that interaction between oyster shell and cement paste was not occurred and the crushed oyster shell can be used as the fine aggregate of concrete. And it is found that blending of an oyster shell caused not to reduce the 28 day compressive strength of concrete. Elastic modulus of the concrete blended with crushed oyster shells decreases with increases the blending rate which the modulus reduced about 10% when oyster shells is blended up to the 20% of the sand substitution.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1015-1019
• /
• 2007

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Because vibration diagnosis can avoid sudden breakdown of machine and reduce the maintenance costs. In chemical factory, Air-compressor and refrigerator which can affect the performance and capacity of output is important machine. Therefore, in this paper, the vibration of reassembled air-compressor and refrigerator after explosion is measured for checking the machine condition. The result of diagnosis and solution is discussed in this paper.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.897-903
• /
• 2004

Waste lime used in this study is producted as a by-product in the manufacturing process of making $Na_2CO_3$ from local chemical factory in Incheon. Currently about 320 millon tons of waste lime are accumulated and annually 100,000 tons are producted. Reuse of waste lime mixed with soil for banking and backfill materia in civil works was analysed in this study. This study was Carried out to investigate the geotechnical and environmental characteristics on field application. Field investigations were conducted on the road construction site in Incheon. This study presents the results of the engineering characteristics in field test and the leaching characteristic of waste lime in laboratory column tests. Countermeasure for reduction of environmental effects was suggested from the test results.

• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.45-52
• /
• 1998

Reuse of wastewater become an important consideration to solve the environmental pollution problems in recent industriallzation and urbanization. Especially, he characteristic of dyeing process is subject to use much water and thus has serious problems for removal of color and organic pollutants in their wastewater. This report is divided into two main parts ： The purpose of the first part was to determine if alkaline wastewater discharged from textile dyeing operation factory could be flocculated directly by Fenton oxidation method. This study was conducted to investigate Fenton reagent dose and reaction condition of Fenton method as pretreatment for dyeing wastewater in K dyeing industry were investigated. In the second part of this research, to treat dyeing wastewater it was found that the most effective way is to use ultrafiltation and reverse osmosis at the conditions of the pH 7.0~8.0 and operating pressure of $2.5~35kg_f/cm^2$. This paper is mainly dealt with the application on reuse system of dyeing wastewater treatment using ultrafiltration and reverse osmosis membranes. The results showed that dyeing wastewater could be reused by chemical, filter and membrane sequential treatment process.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.52-56
• /
• 2008

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Because vibration diagnosis can avoid sudden breakdown of machine and reduce the maintenance costs. In chemical factory, Air-compressor and refrigerator which can affect the performance and capacity of output are important machine. Therefore, in this paper, the vibration of reassembled air-compressor and refrigerator after explosion is measured for checking the machine condition. The result of diagnosis and solution is discussed in this paper.

• Rapid Communication in Photoscience
• /
• v.2 no.3
• /
• pp.85-88
• /
• 2013

Silica nanoparticles were synthesized with various silane coupling agents to make specific pathway of electrons and anti-recombination system when solidifying liquid electrolytes. In this study, we used an appropriate method of synthesis for activated silica nanoparticles and silane coupling agents with 3-(triethoxysilyl)propionitrile, Trimethoxy[3-(methylamino)propyl]silane, Triethoxyoctylsilane, and octadecyltrimethoxy silane. Dye-sensitized solar cells using solidified electrolytes with silica nanoparticles exhibit comparatively excellent efficiency, ranging from 2.3 to 7.0% under similar conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.635-641
• /
• 1994

Recently, Improving the energy efficiency of a pneumatic system and reducing the consumption of compressed air were a concern of scholars at domestic and abroad. The using fields of a pneumatic system are widely used in factory automation of manufacturing line, chemical factories with explosiveness danger and petroleum industries etc. In particular, Pneumatic cylinder is applied to feeding work of workpiece, jig tools and press mechanism, reciprocation and rotary motion with rack and pinion. In this study, The experimental apparatus consisted to pneumatic cylinder, dual supply pressure regulator and solenoid valve. The dual supply pressure regulator connected to outlet port of solenoid valve. The supply pressure (4.5kgf/cm$\^$2/) of compressed air goes into the rodless chamber 1 to drive the pistion rod forward which is named working stage. The supply pressure(2kgf/cm$\^$2/) of compressed air goes into the rod chamber 2 to drive the piston rod backward which is named no-working stage. Accordingly, The research results of this study can be obtained to Energy-Saving Effects of the compressed air about 35%.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.69
• /
• pp.87-92
• /
• 2001

A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.