• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.12a
• /
• pp.91-93
• /
• 2004

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.243-252
• /
• 2012

This paper reviews the implementation of the STCW 78/95 in the Philippine MET including the effects of the revised 2010 Manila Amendments. It discusses the country's maritime environment and the structures, quality of maritime education in the country and the effects on the maritime human resource. Among the various resolutions adopted at the conference, the standards of training and certifications, and promoting skills and competency will be more emphasized in this report. These will be compared with the existing curriculum mandated by CHED and upgrade STCW trainings advised by MTC for maritime institutions. A brief comparison and analysis with other Asian countries' maritime training shall be offered. The recommendation pinpoints to the weaknesses of the present maritime regimes in certification and evaluation of maritime institutions. It concludes with the need to have mutually acceptable evaluation standards in view of developing a competent human resource for the future.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.12a
• /
• pp.88-88
• /
• 2004

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.115-118
• /
• 2001

Suppressed Wave equation Estimation of Traveltime (SWEET, Shin et, al., 2000) 알고리즘을 이용하여 등방성 및 이방성 탄성 매질에 대한 ched 주시와 진폭을 계산하는 방법을 개발하였다. SWEET 알고리즘을 2차원 등방성 및 이방성 탄성 매질의 속도 구조에 적용하여 P파의 초동 주시와 진폭을 계산 할 수 있었다. 본 논문에서는 간단한 등방성 균질 탄성 모형, 복잡한 등방성 탄성 모형 및 간단한 이방성 균질 모형에 대한 수치 계산 결과를 보여 줄 것이다.

• Journal of Surface Science and Engineering
• /
• v.34 no.6
• /
• pp.531-536
• /
• 2001

Co-22 %Cr alloy films are promising for high-density perpendicular magnetic recording media with their perpendicular anisotropy and large coercivity of 3000 Oe. We observed that a self organized nano structure (SONS) of fine ferromagnetic Co-enriched phase and paramagnetic Cr-enriched phase appears inside the grain of Co-Cr magnetic alloy thin films at the elevated substrate temperature after do-sputtering. The periodic fine Co-enriched phase and Cr-enriched phase is the plate shape of 80 (equation omitted)-wide and 1000 (equation omitted)-long. Cr-enriched phases are located at the center of grains. We prepared 5000 (equation omitted) -thick Co-22 %Cr films on polyimide substrate with varying substrate temperature of $ 30^{\circ}C$, $ 150^{\circ}C$ ,200 $^{\circ}C$, $300^{\circ}C$, and $400^{\circ}C$, respectively. A transmission electron microscope equipped with energy dispersive X-ray analyzer is employed to observe the microstructure of each samples after Co-enri-ched phase are etched selectively. The self organized nano structure of Co-enriched and Cr-enriched lamellar is observed above the substrate temperture of $150^{\circ}C$. No compositional change is observed with substrate temperature. The compositional phase separation in self organized structure becomes clear as the substrate temperature increases. Our results implies that the self organized nano structure in Co-22 %Cr film is ideal for ultra high density recording media by recording selectively on Co-enri-ohed phase.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.57-67
• /
• 1993

The fracture behavior of plain woven glass/epoxy composite plates with a crack is investigated under static tensile loading. It is shown in this paper that the characteristic length associated with the point stress criterion depends on the crack length. To predict the not ched tensile strength, the point stress criterion proposed by Whitney and Nuismer are modified. An excellent agreement is found between the experimental results and the analytical prediction of the modified point stress criterion. The condition of unstable crack growth in the presence of a per-existing flaw(machined notch) is examined by means of the maximum stress intensity factor $K_max$ using maximumload P$_max$. The values of $K_max$ evaluated from energy release rate G$_max$(the compliance me thod) indicate a wide difference. Therefore in regard to anisotropy and heterogeneity of the composite materials studied, the modified shape correction factor f(a/W) is obtained. $K_max$evaluated by the compliance method a little or insignificantly depends on the initial crack length a, the specimen thickness B, the crack angle .theta. and the specimen geometry.