• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.143-152
• /
• 1992

Corrosion resistances in various acids and high temperature oxidation properties have been investigated for the Ni-base superalloy KM 1557. Corrosion tests were performed in $H_2SO_4$, HCl, $HNO_3$, $H_3PO_4$ and $CH_3COOH$. Oxidation tests were carried out in air for 20 and 110hrs at $900^{\circ}C$, $950^{\circ}C$ and $1050^{\circ}C$. Hot corrosion tests were done in salt bath of 75% $Na_2SO_4-25%$ NaCl at $900^{\circ}C$ for 20hrs. After the tests, the samples were observed by optical microscopy and analysed by EPMA and X-ray mapping in order to investigate the distribution of composition. It was shown that corrosion resistances in various acids and hot salt bath were proven to be excellent. It was suggested that the amounts of oxides were determined mainly by the depth of internal and intergranular $Al_2O_3$ oxide layers.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.227-233
• /
• 1998

To mitigate the methane emission from rice paddy fields, effects of nitrogen fertilizers source and cultural patterns were evaluated on silty loam soils. And a pot experiment was carried out to find out the effects of nitrogen fertilizers on soil pH, Eh, sulfate concentration of soil water in flooded soil. In transplanting cultivation, the total methane emission depending on fertilizers was $32.9gm^{-2}$ for urea ; $30.3gm^{-2}$ for ammonium sulfate ; $26.4gm^{-2}$ for coated urea. Methane emitted in direct seeding on dry soil was $24.7gm^{-2}$ for urea ; $16.7gm^{-2}$ for ammonium sulfate : and $22.8gm^{-2}$ for coated urea. Thus, the methane emission rate of direct seeding on dry soil was 29.7% lower than transplanting. According to the nitrogen fertilizers, the methane emission rate by ammonium sulfate and coated urea were reduced 18.4 and 15.9% in comparison with urea, respectively. In pot experiments, pH in flooded soils depending on nitrogen fertilizers dereased in order of urea > coated $urea{\fallingdotseq}no$ fertilizer > ammonium sulfate and the order was coincided with that of total $CH_4$ emission from flooded soil. Soil Eh was highest in ammonium sulfate application followed by coated urea, no fertilizer, urea. And sulfate concentrations of soil water were in order of ammonium sulfate > coated urea > urea > no fertilizer.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2001

Isolation and Characterization of Cathepsin B inhibitor Produced by Streptomyces luteogriseus KT-IO. Han, Kil~Hwan and Sang~Dal Kim*. Department of Applied Microbiology, Yeungnam Universit}/t Kyongsan 712749, Korea - The cathepsin B inhibitor produced by Streptomyces luteogriseus KT-IO was very stable in heat, acidic and alkaline conditions. The cathepsin B inhibitor was isolated from the extracted fraction of culture broth with butanol, methanol and chloroform subsequently, the inhibitor was purified with following several column chromatography sLlch as DEAE-Sephadex A-25, Sephadex G-15, silica gel 60, Sephadex LH-20, and preparative HPLC. The cathepsin B inhibitor showed positively to detective reaction of ninhydrine, 5% H2S04, iodine, but negatively to the reaction of Ehrlich's reagent, DNS, aniline. The molecular formular of cathepsin B inhibitor was elucidated by JR, lH and 13C-NMR, FAB mass and elemental analyzer. Consequently, it was identified as C4HlI04N6. The cathepsin B inhibitor had the mode of competitive inhibition with the reaction of cathepsin B.

• Journal of Nutrition and Health
• /
• v.31 no.9
• /
• pp.1481-1497
• /
• 1998

The purpose of this study was to determine the relation between serum lipid profiles, apolipoprotein E phenotype, and dietary patterns in a cross-section of healthy individuals from Cheju-Do. Age, gender, anthropometric measurements, blood pressure, dietary consumption, drinking / smoking habits and menopausal status were surveyed. Total cholesterol, LDL-cholesterol, HDL-cholesterol, triglyceride, fasting blood glucose, and insulin levels were measured from overnight fasting blood. The study involved a total of 286 individuals(147 men and 139 women) between the ages of 20 and 60 years old. All of the subjects were recruited from a population of healthy individuals living in Cheju-Do. The results of the study are as follows : 1) Among the males, those in their 20's had the maximum food intake, while those in their 40's had the minimum food intake. For the females, food intake was the highest for those in their 30's. Energy and nutrient intakes were directly proportional to the amount of food intake. Men in their 30's were heavier than other men and women in their 40's were heavier than other women. The activity index for men in their 20's and 30's appeared to be lower than that of men above 40. The activity index of women in their 20's appeared to be lowest among all aged groups, and the index appeared to increase from the age of 30 onwards. 2) In terms of changes In serum constituents with age, men in their 40's appeared to have the highest levels of serum constituents such as lipids, glucose, and insulin. Men in their 50's showed the highest levels of serum LDL-cholesterol and glucose. Men in their 30's showed peak levels of serum triglycerides. On the other hand, women in their 50's appeared to have peak levels of serum total cholesterol, LDL-cholesterol, and triglycerides. There was no ch:ange with age in HDL-cholesterol and insulin levels for men and women. The percentage of the subjects had the following apo E phenotypes : E3/3, 91.3% ; E3/2, 5.4% ; E4/3, 2.5% ; E4/2, 0.7%. Lee's reserch with Korean female college students showed that the percentage of ApoE3/3, E3/2, E 4/2, E4/3, and E4/4 were 84.8%, 6.7%, 6.7%, 0.9%, 0.9%, respectively. The number of samples with ApoE mutation was so small that there was no statistical significance in the relation between apolipoprotein E phenotype and se겨m lipids. 3) To investigate the relati onship between weight and serum constituents, the subjects of this study were divided into three groups by BMI underweight, normal weight, and overweight. The serum constituents of men and women below the age 40 in the overweight groups belonged to the normal domain. On the other hand, serum cholesterol levels of both men and women above the age 40 in the overweight groups remained in the borderline-high region(above 200mg/dl), and the mean value of LDL-cholesterol(above 130mg/dl) and triglycerides of men were above normal. Fasting blood glucose levels also remained in the borderline-high region. Total cholesterol levels of women above the age 40 in the overweight group was in the borderline-high region. (Korean J Nutrition 31(9) : 1481-1497, 1998)

• Korean journal of applied entomology
• /
• v.57 no.1
• /
• pp.25-32
• /
• 2018

Studies of immune responses in insects have focused on mechanisms that interact directly with invading microorganisms. However, few studies have examined the immune response to various metabolites produced by microorganisms after they enter the host. Here, we examined immune responses in Protaetia brevitarsis seulensis larvae induced by metabolites produced by symbiotic and pathogenic bacteria. The two types of bacteria were cultured under the same conditions. The bacteria were then removed and the remaining culture supernatant was injected into the larvae. The larvae injected with culture medium (Ch-medium) from symbiotic bacteria remained relatively healthy and did not develop an immune response, whereas more than 60% of the larvae injected with pathogen culture medium (Ec-medium) died after 150 hours and dark brown patches of melanin were observed at the injection site. This immune response was confirmed by the finding of activated lysosomes in insect granulocytes. More than 50% of lysosomes in larvae injected with pathogen culture medium were strongly stained after 12 h, but less than 5% of those injected with symbiotic culture media were stained. Therefore, it is assumed that symbiotic bacteria produce few (if any) substances that induce host immune responses.

• The Journal of Korean Medicine
• /
• v.27 no.1 s.65
• /
• pp.165-183
• /
• 2006

Objectives : We implemented the Artemisia Extract Moxibustion Method and had the clinical tests for the diabetes with it. Methods : We implemented Artemisia extract made by extracting the vasodilator and antioxidant compounds from Artemisia-CH2C12 fraction and the moxibustion method constructed with DC Power supply, controller, Artemisia pad. single and multiple heating terminal with PTC(Positive Temperature Coefficient) thermistor. And we performed to estimate the efficiency on the questionnaire and the clinical tests with 23 cases of the diabetics. Results : We have estimated the improvement over 60% the symptoms that were the upper and lower limbs pain, frequent urination, spontaneous perspiration, thirst, decrease of body weight, and malaise after the moxibustion treatment on 5 cases among 23 cases. And the 19 cases took the biochemical check-up after the moxibustion treatment. From the results of biochemical check-up, the average HbAlc of before treatment was 8.400%, and after treatment 7.632%. The average HbAlc was decreased significantly after treatment (P<0.001). And the average urinary blood of before treatment was 0.73 and after treatment 0.27. The average urinary blood was decreased significantly after treatment (P<0.001). In addition the average FBS before treatment was 182.64 mg/dl, after treatment 161.77 mg/dl. Conclusions : We could estimate that our proposed moxibustion method was a significant treatment method for the diabetes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.189-193
• /
• 2003

금형가공에 있어서 밀링머신의 가공에서는 절삭가공의 잔유물인 버(Burr)가 생성되고, 이러한 버는 가공의 정밀도를 감소시킬 뿐만 아니라 후처리과정(Deburring)을 야기시킴으로 인해서 작업효율의 감소 및 생산성의 비효율적 낭비를 가져오게 된다. 따라서, 정밀도와 작업효율을 극대화하긴 위해서는 버의 생성원리를 파악하고, Exit Burr의 생성부분을 미리 예측하여 버의 생성을 최소화 할 수 잇는 작업 가공계획을 설계하여야 한다. (1)기존의 Burr Exit System에서는 피삭재의 단면형상인 Line과 Are처럼 단순한 형상뿐만 아니라, Line과 Are가 연결되어있는 복잡란 형상에 대해서도 버를 판별한다. 그리고, 가공 후 버가 생성되는 부분을 예측하고, 이때의 Exit Angle을 계산하여 이에 해당하는 기 실험결과 DataBase와 연동하여 생설될 버의 형상과 크기 등의 결과를 제공하여 준다. 더불어, 피삭재의 단면형상이 여러 가지 복합적인 형상으로 이루어져 있는 경우와 다양한 공구 경로까지 고려하여 실제가공과 거의 유사란 상황을 적용할 수 잇는 알고리즘으로 개발하였다. 본 논문에서는 이제까지 개발된 다양한 형상에 대한 Exit Burr 판별 알고리즘을 이용하여 임의형상을 가진 피삭재의 다중가공경로 상에서 발생 가능한 버를 예측하고, 버의 길이나 가공시간 들을 정?화 하여 최적화하는데 필요란 요소를 추출해 보고자 한다. 또한, 이를 인용하여 Face Windows에서의 버의 발생을 최소화 할 수 있는 최적 절삭가공 공구경로를 제시하여, 작업 효율성을 극대화하는 알고리즘을 Windows 응용 프로그램으로 구현하고자 한다.생성하기보다는 기존에 발생된 구매 지시의 우선적 사용과 기존 구매 지시의 납기 일자를 고객 납기에 가장 잘 맞출 수 있도록 변경하는 방안을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.219-225
• /
• 2000

The spinel structured $LiMn_2O_4$was obtained by two consecutive heat treatment on xerogel; the first heat treatment was at $150^{\circ}C$ and the second at $350^{\circ}C$ was obtained by sol-gel process using an aqueous solution of lithium hydroxide and manganese acetate. The synthesized $LiMn_2O_4$ by the sol-gel process showed a discharge capacity of 88~56 mAh/g after 15 cycles in Li/lM $LiClO_4$(in PC)/$LiMn_2O_4$at a current density of 0.25 mA/$\textrm{cm}^2$ and the voltage ranged 3.5 V to 4.3 V. For the second heat treatment above $350^{\circ}C$, $Mn_2O_3$was formed as a by-product during the synthesis of $LiMn_2O_4$. The heat treatment at $500^{\circ}C$, for example, showed a lower discharge capacity 81~47 mAh/g, after the 15 charge/discharge cycles. The lower capacity was due to the increment of $Mn^{3+}$ ion and this phenomenon was in agreement with the Jahn-Teller distortion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1619-1626
• /
• 2018

Objective: This study was an attempt to investigate the effect of levels of fungal (Lentinus sajor-caju) treated oil palm fronds (FTOPF) on digestibility, rumen fermentation, and nitrogen balance in goats. Methods: Four 16 month old male crossbred (Thai Native${\times}$Anglo Nubian) goats with initial body weights of $33.5{\pm}1.7kg$ were randomly assigned according to a $4{\times}4$ Latin square design. Four levels of FTOPF were assigned for feed intake. The experimental treatments consisted of 0%, 33%, 67%, and 100% of oil palm fronds (OPF) being replaced by FTOPF. Results: The results revealed that total dry matter intake and nutrient intake were not influenced (p>0.05) by the inclusion of FTOPF. However, the efficiency values of the digestibility of the dry matter, organic matter, crude protein, neutral detergent fiber, acid detergent fiber, and acid detergent lignin on FTOPF were higher (p<0.05) in treatments with 33%, 67%, and 100% of FTOPF compared with 0% of FTOPF. FTOPF feeding did not change the rumen pH, temperature, and $NH_3-N$. However, the FTOPF levels did affect the total volatile fatty acid (VFA), molar proportion of acetate, propionate, butyrate, ratio of acetic (propionic acid and acetic) plus butyric (propionic acid), and production of $CH_4$. The totals of VFA and propionate was lower in goat fed with 0% of FTOPF than in those of the other groups (p<0.05). The amount of nitrogen retention based on g/d/animal or the percentage of nitrogen retained was the lowest the goat fed with 0% of FTOPF (p<0.05), whereas nitrogen intake, excretion, and absorption were not changed among treatments. Conclusion: Based on this study, FTOPF could be effectively used as an alternative roughage source in total mixed ration diets, constituting at least up to 100% of OPF.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.