• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2003년도 추계 학술대회 논문집
• /
• pp.39-42
• /
• 2003

최근에 널리 쓰이고 있는 섬유강화 복합재료는 플라스틱 재료가 갖고 있는 가공성의 장점을 충분히 발휘한 재료로서 모재인 수지와 강화재인 강화섬유로 구성되며 사용된 섬유의 종류에 따라 유리섬유강화플라스틱(GFRP : glass fiber reinforced plastic)과 탄소섬유강화플라스틱(CFRP : carbon fiber reinforced plastic)으로 구분된다. 이 두 복합재료가 건설, 선박, 자동차 그리고 우주항공분야에 이르기까지 거의 모든 산업에서 다양하게 이용되고 있다. (중략)

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.10-21
• /
• 2015

콘크리트 구조물의 내력성능을 향상시키기 위해 탄소섬유쉬트(Carbon Fiber-Reinforced Plastic Sheet, 이하 CFRP sheet)로 보강된 콘크리트에 대해 많은 연구가 수행되어 왔다. 본 연구는 CFRP sheet로 구속된 콘크리트에 대한 연구 중 미비한 부분을 보완하기 위하여 보강겹수, 시험체의 크기, 형상비, 겹이음길이를 변수로 하여 연구를 수행하였다. 각 시험체별 응력-변형률 곡선을 통해 콘크리트의 거동을 비교하였으며, 최대압축강도를 통하여 CFRP sheet의 보강효과를 확인하였다. 보강겹수의 증가에 따라 콘크리트의 압축성능은 크게 개선되었으며, 시험체의 크기와 형상비의 변화를 통해 이론적인 부분을 검증하였고, 겹이음길이는 둘레의 5%이상으로 해야만 보강효과에 영향이 없는 것으로 확인하였다. 또한 본 연구의 시험결과와 기존 시험결과를 정리하고 이를 기준으로 기존 강도추정모델을 통계 분석함으로 모델의 정확성과 신뢰성을 검증하였다.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.20-25
• /
• 2012

Currently, the most important purpose in designing automobile is environment-friendly and safety performance aspect. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a wide application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. In this study, experimental investigations are carried out for CFRP single and double hat shaped section member in order to study the effect of various stacking condition. They were cured by heating to the appropriate curing temperature($130^{\circ}C$) by means of a heater at the vacuum bag of the autoclave. The stacking conditions were selected to investigate the effect of the interface numbers. The CFRP single and double hat shaped section members which manufactured from unidirectional prepreg sheets were made of 8ply. The static collapse tests performed and the collapse mode and energy absorption capability were analyzed according to interface number.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.25-30
• /
• 2017

Carbon-fiber-reinforced plastic (CFRP) composite materials have been widely used in various industrial fields because the design variables can be adjusted according to the application of the required structure. Thermosetting and thermoplastic resins are used as the base materials of CFRP composites for the lightweight construction of automotive components. Thermoplastics have several advantages such as no curing and recyclability compared to thermosetting resin. In this study, CFRP composites were made using the Long-Fiber Thermoplastic-Direct (LFT-D) process. The LFT-D process includes an in-line production system that directly impregnates a thermoplastic resin, extrudes the composite material, and molds it. This process increases the strength and decreases the molding time. The tensile strength characteristics on the mechanical properties of CFRP were analyzed according to the parameters of LFT-D based on thermoplastics. To analyze the properties of CFRP, the specimens were prepared based on the tensile test standard ASTM 3039 of composite materials.

• Advanced Composite Materials
• /
• 제17권4호
• /
• pp.359-372
• /
• 2008

The moisture absorption behavior of carbon fiber-reinforced plastic (CFRP) and its effect on dimensional stability were examined. Moisture diffusivity in CFRP was determined by measuring a specimen's weight during the moisture absorption test. Three types of CFRP specimens were prepared: a unidirectionally reinforced laminate, a quasi-isotropic laminate and woven fabric. Each CFRP was processed into two geometries - a thin plate for determination of diffusivity and a rod with a square cross-section for the discussion of two-dimensional diffusion behavior. By solving Fick's law expanded to 3 dimensions, the diffusivities in the three orthogonal directions were obtained and analyzed in terms of the anisotropy of CFRP moisture diffusion. Coefficients of moisture expansion (CMEs) were also obtained from specimen deformation caused by moisture absorption. During moisture absorption, the specimen surfaces showed larger deformation near the edges due to the distribution of moisture contents. This deformation was reasonably predicted by the finite element analysis using experimentally determined diffusivities and CMEs. For unidirectional CFRP, the effect of the fiber alignment on CME was analyzed by micromechanical finite element analysis (FEA) and discussed.

• Composites Research
• /
• 제35권6호
• /
• pp.447-455
• /
• 2022

현재 해양 미세플라스틱에 의한 해양 환경 오염문제가 국제적으로 심각하게 대두되고 있다. 이와 관련하여 본 연구에서는 휴대용 미세플라스틱 수거 장비의 경량화 개발을 위해 대한민국 전국 21개소 해안가에서의 미세플라스틱종류와개수를조사하였고, 미세플라스틱수거장비진공장비의내구성, 내부식성, 경량화를위해 CFRP(Carbon Fiber Reinforced Plastic), GFRP(Glass Fiber Reinforced Plastic), ABS(Acrylonitrile Butadiene Styrene copolymer), aluminum과 같은 다양한 소재를 적용하여 설계 및 해석을 수행하였다. 해안가에서의 시료 채취 및 분류결과 함덕해수욕장에서 미세플라스틱이 가장 많이 분포되어 있는 것을 확인하였고, 주로 폴리스타이렌(Polystyrene)의 미세플라스틱이 분포되어 있는 것으로 나타났다. 해안가 현장 조사를 통한 입자정보 분석과 전산유체해석을 통해 모래 및 불순물 등의 입자 유동속도 및 분포를 분석하였고, 이를 진공 본체 내부의 중요 부품인 싸이클론 장치의 구조해석에 적용하였다. 싸이클론 장치의 모래 및 불순물 흡입 시 발생되는 입자 충격을 고려한 구조해석 결과 CFRP, GFRP, aluminum, ABS의 순으로 구조적 안전성이 우수한 것으로 평가되었다. 경량화 측면으로는 싸이클론 장치에 aluminum 소재를 적용했을 때와 비교하여 CFRP는 53%, GFRP는 47%, ABS는 61%의 경량화가 가능한 것으로 나타났다.

• Corrosion Science and Technology
• /
• 제18권4호
• /
• pp.129-137
• /
• 2019

CFRP (Carbon Fiber Reinforced Plastics) is composed of carbon fiber and plastic resin, and is approximately 20 - 50% lighter than metallic materials. CFRP has a low density, higher specific stiffness, specific strength, and high corrosion resistance. Because of these excellent properties, which meet various regulation conditions needed in the industrial fields, CFRP has been widely used in many industries including aviation and ship building. However, CFRP reveals water absorption in water immersion or high humidity environments, and water absorption occurs in an epoxy not carbon fiber, and can be facilitated by higher temperature. Since these properties can induce volume expansion inside CFRP and change the internal stress state and degrade the chemical bond between the fiber and the matrix, the mechanical properties including bond strength may be lowered. This study focused on the effects of NaCl concentration (0.01 - 1% NaCl) and solution temperature ($30-75^{\circ}C$) on the galvanic corrosion between CFRP and A516Gr.55 carbon steel. When NaCl concentration increases 10 times, corrosion rate of a specimen was not affected, but that of galvanic coupled carbon steel increased by 46.9% average. However, when solution temperature increases $10^{\circ}C$, average corrosion rate increased approximately 22%, regardless of single or galvanic coupled specimen.

• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.1078-1085
• /
• 2022

선박에 부착된 수중생물은 선체에서 성장하면서 선박의 저항을 크게 증가시킬 뿐만 아니라 부착생물이 배와 함께 이동하면서 지역의 해양 생태계 교란을 야기시키기도 한다. 이에 따라 국제해사기구에서는 선체부착생물의 이동을 막기 위해 선체부착생물 제거 및 청소성능 평가 논의를 시작해 오고 있다. 본 연구에서는 소형선박에 사용되는 FRP(Fiber Reinforced Plastic), HDPE((High Density Polyethylene), CFRP(Carbon Fiber Reinforced Plastic) 재료의 시편을 격포항(전락북도)에 약 80일간 양생시킨 후 물 제트 노즐을 이용하여 부착생물 제거실험을 수행하였다. 그 결과 김과 같은 해조류는 노즐과 시편과의 거리가 1.8cm, 100bar 일 때 제거되었지만, 따개비의 경우 200 bar 이상은 되어야 청소가 되는 것을 확인하였다.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.1-7
• /
• 2019

A variety of composite materials are applied to industries for the realization of light weight and high strength. Fiber-reinforced composites have different strength and range of application depending on the weaving method. The mechanical performance of CFRP(Carbon Fiber Reinforced Plastic) in many areas has already been demonstrated. Recently, the application of hybridization has been increasing in order to give a compensation for brittleness of CFRP. Target materials are UHMWPE (Ultra High Molecular Weight Polyethylene), which has excellent cutting and chemical resistance, so it is applied not only to industrial safety products but also to places that lining performance is expected for household appliances. In this study, the CFRP and UHMWPE of plain weave, which are highly applicable to curved products, were molded into laminated hybrid composite materials by autoclave method. The mechanical properties and the mode I failure behavior between the layers were evaluated. The energy release rate G has decreased as the initial crack length ratio increased.