• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.329-335
• /
• 2016

In the present paper, Computational fluid dynamics (CFD) uncertainty analysis proposed by ITTC was investigated and applied to ship resistance performance using open source libraries, called OpenFOAM. Uncertainties for grid size, time step and iteration number were studied. Wave patterns and hull wave profile were compared for various uncertainty parameters. From results, grid size uncertainty was mainly contributed to simulation numerical uncertainty.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.155-162
• /
• 2015

Abalone (Haliotis discus hannai) is a shellfish that feeds on kelp and, as a product, it can often achieve a high market value. However, the dissolved oxygen (DO) levels in coastal waters in Korea have been negatively impacted by pollution from many anthropogenic sources. Herein, a computational fluid dynamics (CFD) software package was used to analyze the distribution of the DO concentration within an abalone containment structure. A finite volume approach was used to solve the Reynolds-averaged Navier-Stokes equations combined with a $k-{\varepsilon}$ turbulence model to describe the flow. The distribution of DO was determined within the control volume domain, and the transport equations of the pollutants were interpreted using a CFD model. The CFD analysis revealed that more than 60% and 30% of the relative oxygen concentration in one and two containers, respectively, was maintained when the flow acts along the six sheets of polyethylene plates. Therefore, it is clear that the abalone plate shelters should be placed parallel to the flow.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.99-112
• /
• 2021

The prediction of maneuverability is very important in the design process of an underwater vehicle. In this study, we predicted the steady turning ability of a symmetrical underwater vehicle while considering interactions between the yaw rate and drift/rudder angle through a simulation-based methodology. First, the hydrodynamic force and moment, including coupled derivatives, were obtained by computational fluid dynamics (CFD) simulations. The feasibility of CFD results were verified by comparing static drift/rudder simulations to vertical planar motion mechanism (VPMM) tests. Turning motion simulations were then performed by solving 2-degree-of-freedom (DOF) equations with CFD data. The turning radius, drift angle, advance, and tactical diameter were calculated. The results show good agreement with sea trial data and the effects on the turning characteristics of coupled interaction terms, especially between the yaw rate and drift angle.

• 한국공간구조학회논문집
• /
• 제21권1호
• /
• pp.51-59
• /
• 2021

In this paper, the effect of the turbulence intensity in across-wind direction on the wind load in CFD(Computational fluid dynamics) simulation was analyzed. 'Ansys fluent' software was used for CFD simulation. And the fluctuating wind speed applied to the simulation was generated according to Korean Design Standard and Von Karman wind turbulence model. The turbulence intensity in across-wind direction for simulation was applied from 0 to 100% of the turbulence intensity in along-wind direction. The analysis results showed that the turbulence intensity in across-wind direction had a particularly great effect on the wind load in across-wind direction.

• Wind and Structures
• /
• 제34권3호
• /
• pp.259-274
• /
• 2022

The present paper is focused on analyzing a set of Computational Fluid Dynamics (CFD) simulation data on reducing orthogonal peak base moment coefficients on a high-rise rectangular building with wings. The study adopts an aerodynamic optimization procedure (AOP) composed of CFD, artificial neural network (ANN), and genetic algorithm (G.A.). A parametric study is primarily accomplished by altering the wing positions with 3D transient CFD analysis using k - ε turbulence models. The CFD technique is validated by taking up a wind tunnel test. The required design parameters are obtained at each design point and used for training ANN. The trained ANN models are used as surrogates to conduct optimization studies using G.A. Two single-objective optimizations are performed to minimize the peak base moment coefficients in the individual directions. An additional multiobjective optimization is implemented with the motivation of diminishing the two orthogonal peak base moments concurrently. Pareto-optimal solutions specifying the preferred building shapes are offered.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.41-47
• /
• 2019

In conventional machining, the use of cutting fluid is essential to reduce cutting heat and to improve machining quality. However, to increase the performance of cutting fluids, various chemical components have been added. However, these chemical components during machining have a negative impact on the health of workers and cutting environment. In current machining, environment-friendly machining is conducted using MQL (minimum quantity lubrication) or cryogenic air spraying to minimize the harmful effects. In this study, the injection nozzle that can combined injecting minimum quantity lubrication(MQL) and cryogenic gas was designed and the shape optimization was performed by using computational fluid dynamics(CFD) and design of experiment(DOE). Performance verification was performed for the designed nozzle. The diameter of the sprayed fluid at a distance of 30 mm from the nozzle was analyzed to be 21 mm. It was also analyzed to lower the aerosol temperature to about 260~270K.

• KIEAE Journal
• /
• 제10권2호
• /
• pp.63-69
• /
• 2010

Diverse problems in wind environment has occurred through rapid urbanization and growth of high-rise building numbers, This study aims to propose the CFD (Computational Fluid Dynamics) simulation method and evaluation standard of wind environment in site planning of high rise apartment housing. The CFD simulation method proposed in this study is not existing detail simulation, but it is the method that a designer can correct and develop the design through immediate evaluation of design options in concept design phase. Therefore, the proposed CFD simulation method of wind environment in this study uses the BIM based CFD tool in which the 3D model in concept design phase can be used as for the CFD simulation. In this paper, the study examines existing evaluation standards of comfortableness level in wind environment for pedestrian near buildings, and selects new evaluation method which is possible to apply to the proposed CFD simulation method. In addition, it is to examine calculation time-spending and appropriate mesh division method for finding CFD result which is useful to find the best design options in aspect of wind environment in concept design phase. Furthermore, it proposes the wind environment evaluation method through BIM based CFD simulation.

• 한국가스학회지
• /
• 제16권5호
• /
• pp.58-65
• /
• 2012

현재 가연성 가스의 누출시 누출된 가스의 확산과 VCE에 의한 과압을 예측하기 위해 여러 모델들이 이용되고 있다. 그러나 이 모델들은 누출설비의 지형과 장애물 그리고 건물들의 영향에 대해서는 충분히 고려하지 않은 단순한 접근방법을 이용하고 있다. 이에 본 연구는 누출된 물질의 연소형태, 설비의 Geometry, 난류, 장애물, 바람의 영향 등 여러 변수를 고려하여 보다 정확하게 분석할 수 있는 CFD(Computational Fluid Dynamics) Model을 검토함으로서 누출된 가스의 확산과정과 분포형태 그리고 폭발시 화염과 과압의 결과를 2D와 3D의 가상공간에서 제시하였다. 이러한 CFD 분석결과는 폭발에 대한 리스크 분석과 리스크 기반의 설계에 있어 유용하게 활용될 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1080-1087
• /
• 2019

화학물질 취급공정에서 발생하는 화학사고를 예방하기 위해 기본적으로 요구되는 위험성 분석 (Risk Analysis)시 공정의 특성을 잘 반영하는 것이 매우 중요하다. 본 연구에서는 CFD (computational fluid dynamics) 언어를 활용하여 화학공장의 고위험 공정을 대상으로 신뢰성 있는 사고 피해 결과를 분석하고 안전확보 방안을 제시하였다. 이를 위한 방법론적 사례로 화학공장의 RHDS (잔사유수첨탈황공정) 공정을 대상으로 실제공정의 운전조건, 설비 및 장치의 형태와 밀집도, 대기상태, 바람의 영향 등 여러 복합적 변수를 고려하여 FEA (Finite Element Analysis)와 CFD 시뮬레이션을 수행하여 확산, 폭발 시뮬레이션을 수행하였으며, 3D Scanning 기술, 누출공 크기 산정, 누출량 산정을 위한 CFD 적용 가능성을 검토하였다.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2015

In this study, a numerical prediction on propulsive performance of a ducted propeller in open water condition was carried out by solving Reynolds averaged Navier-Stokes(RANS) equation using computational fluid dynamics(CFD). A configuration of propeller Ka-470 inside duct 19A was considered. Hexahedral grid system was generated by dividing whole computational domain into three separate regions; propeller, duct and outer flow region. A commercial CFD software, ANSYS-CFX was used for numerical simulations. Results were compared with experimental data and showed considerable improvement in accuracy, in comparison to those from surface panel method which is based on potential flow assumption. The results also exhibited the importance of grid system within the gap between the inner surface of duct and blade tip for accurate prediction of propulsive performance of ducted propeller.