• Title/Summary/Keyword: CE101

Search Result 22, Processing Time 0.024 seconds

The Promotion Effects on Partial Oxidation of Methane for Hydrogen Production over Co/Al2O3 and Ni/Al2O3 Catalysts (수소생산을 위한 메탄 부분산화용 코발트와 니켈 촉매에서의 조촉매 첨가 효과)

  • Hong, Ju-Hwan;Ha, Ho-Jung;Han, Jong-Dae
    • Clean Technology
    • /
    • v.18 no.1
    • /
    • pp.95-101
    • /
    • 2012
  • The Co and Ni catalysts supported on $Al_2O_3$ for partial oxidation of methane producing hydrogen were synthesized using impregnation to incipient wetness. And the promotion effects of metals such as Mg, Ce, La and Sr in partial oxidation of methane over these $Co/Al_2O_3$ and $Ni/Al_2O_3$ were investigated. Reaction activity of these catalysts for the partial oxidation of methane was investigated in the temperature range of 450~$650^{\circ}C$ at 1 atm and $CH_2/O_2$ = 2.0. The catalysts were characterized by BET, XRD and SEM/EDX. The results indicated that the catalytic performance of these catalysts was improved with the addition of 0.2 wt% metal promoter. The Mg promoted $Co/Al_2O_3$ catalyst showed the highest $CH_4$ conversion and hydrogen selectivity at higher temperature than $500^{\circ}C$. The Ce and Sr promoted Ni catalysts superior to Co-based catalysts in the low temperature range. The addition of metal promoter to $Co/Al_2O_3$ and $Ni/Al_2O_3$ catalysts increased the surface area.

Allanite Mineralization in the Mt. Eorae Area (어래산지역(御來山地域)의 갈렴석광상(褐簾石鑛床))

  • Oh, Mihn-Soo
    • Economic and Environmental Geology
    • /
    • v.22 no.2
    • /
    • pp.151-166
    • /
    • 1989
  • A study of rare-earth mineralization in Kyemyungsan metasedimentary formation of Precambrian Ogcheon Group was carried out in the Mt. Eore Area near Choongju City based on the thorium (Th) and uranium (U) count data of geophysical airborne survey. This rare-earth mineralization was found in the magnetite-bearing banded quartizite which contains diagnostically some amounts of the metamict allanite. The brown colored allanites are distributed as aggregates of fine grains and sometimes banded structures with magnetite (inter growth) along the banding. The ore bed is displaced by the small faults and granite intrusions, and separated 5 ore blocks. The dimensions of the outcrop are 50-80 m in width, 1,500 m in length with the strike of $N70-80^{\circ}E$ and dip of $50-80^{\circ}NW$. In the field, the values of total gamma ray count of GR-101A scintillometer were able to measure more than 400 cps and maximum 1,500 cps, which data are coincided with the values of GR-310 gamma ray spectrometer and the gamma ray count of well logging data. The chemical compositions of the allanites from EPMA data are ranged from$\sum^{TR_2O_3}$ 18.57% to 26.00%, and the cerium oxides ($Ce_2O_3$) of allanite are positive relation with $La_2O_3$, MgO, FeO, MnO and negative relation with $SiO_2$, $Al_2O_3$, $Nd_2O_3$. The result of Neutron Activation Analysis (N.A.A.), Multi-Channel Analysis (M.C.A.) and wet chemistry of 25 outcrop samples for the elements of REE, Zr, U, Th shows strong anomalies. The good correlation elements with the thorium (Th) are the elements of La, Ce, LREE, $TR_2O_3$, Pr, Sm, Yb, Lu by the increasing order.

  • PDF

Mechanism study on DNA damage and Apoptosis induced by heak shock using Comet Assay

  • Seo, Young-Rok;Han, Sung-Sik;Kim, L. O′Neill;Ryu, Jae-Chun
    • Proceedings of the Korea Society of Environmental Toocicology Conference
    • /
    • 1997.12a
    • /
    • pp.101-101
    • /
    • 1997
  • Comet assay, single cell gel electrophoresis has been known as useful, rapid, simple, visual, and sensitive technique for measuring the DNA breakage in mammalian ce1ls. For evaluation of DNA damage using comet assay, early studies reported a change in comet length and intensity with DNA damage using simple visual technique, such as fluorescence microscopy with eyespiece. In recent, some workers are observing and analyzing nucleotide of comets using quantitative fluorescence image analysis system to estimate 'tail moment', which is defined as the product of the tail length and the fraction of total DNA in tail. Our laboratory also adopted the image analysis software for qualification. In addition, many of the practical features of comet assay render it potentially attractive as useful tool for molecular toxicology and carcinogenesis, because the system is already showing considerable promise as rapid predictor in both in vitro and in vivo experimental designs. Recently, the comet assay becomes a attractive technique to study of apoptosis, because apoptotic fragmentation of nuclear DNA into nucleosomal sizes can be evaluated by the comet assay. So, we attempted to apply the comet assay to studying the effect of various stress on the apoptosis-sensitive cell lines. Particularly, focusing on the hyperthermic apoptosis, we could find that heat shock(44˚C for 60 minutes) was sufficient to induced apoptosis in these cell lines. But using the highly sensitive comet assay, we could not detect DNA breaks immediately after heat shock.

  • PDF

Development of an Entrainment Model for the Steam Line Break Mass and Energy Release Analysis

  • Park, Young-Chan;Kim, Yoo
    • Journal of Energy Engineering
    • /
    • v.12 no.2
    • /
    • pp.101-108
    • /
    • 2003
  • The purpose of this study is to develop an entrainment model of the Pressurized Water Reactor (PWR) U-tube Steam Generator (SG) for Main Steam Line Break (MSLB) analyses. Generally, the temperature of the inside containment vessel at MSLB is decreased by introducing the liquid entrainment effect. This effect makes a profit on the aspect of integrity evaluation for Equipment Environmental Qualification (EEQ) in the containment. However, the target plant, Kori unit 1 does not have the entrainment data. Therefore, this study has been performed. RETRAN-3D and LOFTRAN computer programs are used for the model development. There are several parameters that are used for the initial benchmark, such as Combustion Engineerings (CE) experimental data and the RETRAN-3D model which describes the test leg. A sensitivity study is then performed with this model in which the model parameters are varied until the calculated results provide reasonable agreement with the measured results for the entire test set. Finally, a multiplication factor has been obtained from the 95/95 values of the calculated (best-estimate) quality data relative to the measured quality data. With this new methodology, an additional temperature margin of about 40$^{\circ}C$ can be obtained. So, the new methodology is found to have an explicit advantage to EQ analyses.

Enhancement of polyphenols, flavonoids and antioxidant activities in water extract of mulberry (Morus alba L.) root bark by steam treatment

  • Rahul, Kamidi;Kweon, HaeYong;Kim, Hyun-Bok;Lee, Ji Hae;Makwana, Pooja
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.44 no.1
    • /
    • pp.21-27
    • /
    • 2022
  • Different parts of the mulberry plant are described to be potential sources of polyphenolics exhibiting strong antioxidant activity. In this study, we prepared various aqueous extracts of mulberry root bark by subjecting to steam at different temperatures and time intervals (45℃, 15 h; 70℃, 15 h; 95℃, 6 h and 95℃, 15 h) followed by extracting at 80℃ for 1 h. The total polyphenolic content ranged from 66.82-101.20 mg gallic acid equivalent (GE)/g of extract whereas the flavonoids were in the range of 13.03-25.23 mg catechin equivalent (CE)/g of extract. The extracts also exhibited strong antioxidant activities (0.99-1.66 mg trolox equivalent (TE)/g of extract in DDPH assay and 10.65-16.26 mg TE/g of extract in ABTS assay). This study clearly showed an improvement in the antioxidant activity of the water extract of mulberry root bark by the steam treatment, which can be used as a tea or health-promoting materials.

Estimating Gastrointestinal Transition Location Using CNN-based Gastrointestinal Landmark Classifier (CNN 기반 위장관 랜드마크 분류기를 이용한 위장관 교차점 추정)

  • Jang, Hyeon Woong;Lim, Chang Nam;Park, Ye-Suel;Lee, Gwang Jae;Lee, Jung-Won
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.9 no.3
    • /
    • pp.101-108
    • /
    • 2020
  • Since the performance of deep learning techniques has recently been proven in the field of image processing, there are many attempts to perform classification, analysis, and detection of images using such techniques in various fields. Among them, the expectation of medical image analysis software, which can serve as a medical diagnostic assistant, is increasing. In this study, we are attention to the capsule endoscope image, which has a large data set and takes a long time to judge. The purpose of this paper is to distinguish the gastrointestinal landmarks and to estimate the gastrointestinal transition location that are common to all patients in the judging of capsule endoscopy and take a lot of time. To do this, we designed CNN-based Classifier that can identify gastrointestinal landmarks, and used it to estimate the gastrointestinal transition location by filtering the results. Then, we estimate gastrointestinal transition location about seven of eight patients entered the suspected gastrointestinal transition area. In the case of change from the stomach to the small intestine(pylorus), and change from the small intestine to the large intestine(ileocecal valve), we can check all eight patients were found to be in the suspected gastrointestinal transition area. we can found suspected gastrointestinal transition area in the range of 100 frames, and if the reader plays images at 10 frames per second, the gastrointestinal transition could be found in 10 seconds.

Analysis of the Various Constituents and Comparison of Biological Activities of Different Parts of Allium victorialis var. platyphyllum (산마늘의 부위별 성분분석 및 생리활성 평가)

  • Kim, Jin-Young;Cho, Jeong-Yong;Na, Hwan-Sik;Choi, Gyeong-Cheol;Park, Jong-Soo;Lee, Ji-Heon;Jeong, Seon-Ho;Moon, Jae-Hak
    • Korean Journal of Food Science and Technology
    • /
    • v.44 no.1
    • /
    • pp.100-105
    • /
    • 2012
  • Analysis of the various constituents and determination of biological activities in the different parts (root, stem, and leaf) of Allium victorialis var. platyphyllum were carried out. Potassium and calcium were detected in higher contents (mg/100 g fresh wt.) than other minerals. The total phenolic content (mg tannic acid eq./100 g dry wt.) decreased in the order of leaves ($792.7{\pm}16.6$) > stems ($160.3{\pm}6.8$) > roots ($101.5{\pm}2.7$), and the total flavonoid content (mg quercetin eq./100 g dry wt.) was as follows: leaves ($497.9{\pm}11.1$), roots ($35.7{\pm}0.4$), stems ($18.5{\pm}1.4$). DPPH radical-scavenging activity and inhibition activity against the formation of cholesteryl ester hydroperoxide in rat blood plasma was higher in the leaves than in roots and stems. Extracts of A. victorialis separated by parts displayed antimicrobial activity against Clostridium perfringens, Staphylococcus aureus, Listeria monocytogenes, Vibrio vulnificus, Vibrio parahaemolyticus, of which the strongest activity was against C. perfringens.

Physicochemical Environments and Phytoplankton Community in the Nakdong River Middle Basin (낙동강 중류의 이화학적 환경과 식물성 플랑크톤 군집)

  • 장우석;강재형;정순형
    • Journal of environmental and Sanitary engineering
    • /
    • v.10 no.2
    • /
    • pp.36-45
    • /
    • 1995
  • Physicochemical environments and phytoplankton community in the nakdong river middle basin were investigated during a period of 1 year from Nov. 1993 to Oct. 1994. The ranges of Physicochemical environment factors in the nakdong river middle basin were $3.6~27.4{\circ}C$ for temperature, 7.1~9.3 for pH, $7.1~12.7mg/{\ell}$for DO, $0.7~2.1mg/{\ell}$ for BOD, $31~52mg/{\ell}$ for alkalinity, $2.101~3.3mg/{\ell}$ for T-N, $0.052~0.099mg/{\ell}$ for T-p, $5.4~92.3mg/m^{3}$ for chlorophyll-a. The number of Phytoplankton was lowest in Jan. that is, 244ce11s/ml and that was highest in Sep. 1201 cells/ml. The increase of dominant genera were correlated with the total nomber of phytoplanktons. Bacillariaceae, chlorophyceae, cyanophyceae, and euglenophlrceae were to 74.5%, 20%, 3.5%, and 2.2% respectively. Bacillariaceae were abundant during all the year round except for Jun, Jul, Aug. Chlorophyceae were plentiful in Jun, Jul, Aug. Tase-and odor-causing algae and filter clogging algae were 72% in Nov. and 93.5% in Jun. They were abundant all the year round except for winter, so they influenced on the treatment of tap water system. They belong to the general asterionella, cyclotella, melosira, nitzschia of bacillariaceae and actinastrum, pediastrum of chlorophyceae. Dominace index was low in winter and high in umber. Diversity index and equitability index were low in summer and high in winter. Therefore, the structure of phytoplankton community of the nakdong river middle basin was different form season to season.

  • PDF

Case Study : Application of Specific Evaluation Criteria For Safety Circuit Design of EN ISO 13849-1 (사례 연구 : EN ISO 13849-1의 안전회로 설계를 위한 구체적 평가 기준의 적용)

  • Jung, Hwansuk;Lee, Dongju
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.41 no.1
    • /
    • pp.94-101
    • /
    • 2018
  • With the development of industrial technology and science, production and manufacturing facilities have been enhanced and improved, and the importance of the safety of workers has also been regulated and limited by various safety management methods. As a way to secure the safety of the workers from the production facility, the fail-safe and fool-proof methods are now being applied. Any possible insecure behavior and unsafe conditions can be removed by adopting the standards and specifications that are now secure the safety of workers and equipment. This research analyzes EN ISO 13849-1 international and European standards during CE certification. In order to secure acceptable reduced risks, the risk assessment process of ISO 12100 and the processes for reducing its risk are applied. In the current ISO 13849-1 standard, the criteria for the required performance level PLr (Required Performance Level) for the applicable risk and safety functions through the risk assessment are subjective and not subdivided. Therefore, the evaluation criteria are likely to cause judge's judgement error due to qualitative judgement. This research focuses on evaluation and acceptable performance level setting for the safety circuit of the equipment. We propose an objective and specific evaluation criteria to secure safety, and the proposed evaluation criteria are applied to the case study of the safety circuit for the equipment. In order to secure the safety of the entire safety circuit, the improvement of the MTTFd and DC level related to the SRP/CS (Safety-Related Parts of Control Systems)' lifetime is required for the future research.

A comparison of dimensional standard of several nickel-titanium rotary files

  • Kim, Ki-Won;Cho, Kyung-Mo;Park, Se-Hee;Choi, Ki-Yeol;Karabucak, Bekir;Kim, Jin-Woo
    • Restorative Dentistry and Endodontics
    • /
    • v.39 no.1
    • /
    • pp.7-11
    • /
    • 2014
  • Objectives: The aim of this study was to compare the dimensional standard of several nickel-titanium (Ni-Ti) rotary files and verify the size conformity. Materials and Methods: ProFile (Dentsply Maillefer), RaCe (FKG Dentaire), and TF file (SybronEndo) #25 with a 0.04 and 0.06 taper were investigated, with 10 in each group for a total of 60 files. Digital images of Ni-Ti files were captured under light microscope (SZX16, Olympus) at $32{\times}$. Taper and diameter at $D_1$ to $D_{16}$ of each files were calculated digitally with AnalySIS TS Materials (OLYMPUS Soft Imaging Solutions). Differences in taper, the diameter of each level ($D_1$ to $D_{16}$) at 1 mm interval from (ANSI/ADA) specification No. 101 were statistically analyzed using one-way ANOVA and Scheffe's post-hoc test at 95% confidence level. Results: TF was the only group not conform to the nominal taper in both tapers (p < 0.05). All groups except 0.06 taper ProFile showed significant difference from the nominal diameter (p < 0.05). Conclusions: Actual size of Ni-Ti file, especially TF, was different from the manufacturer's statements.