• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.219-223
• /
• 2004

MMS has been seen as the key application in its entry into the 3G mobile markets. Furthermore, the combination of WLAN and 3G wireless technologies will make MMS service more popular, bringing benefits to both service providers and their customers. To realize seamless MMS service over WLAN and CDMA2000 networks, we design and implement new platform architecture by reusing the existing standards and network elements at the same time. We employ loose coupling approach and Mobile IP approach to propose new platform architecture, interfacing MMSC with many existing components. Based on our platform architecture, we also present seamless MMS delivery implementations that can't be possible within the current MMS reference architecture. This paper will make a contribution for service providers to offer their customers with seamless MMS service over WLAN and CDMA2000 networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1992-2001
• /
• 1999

We address the frequency management in the IMT-2000 CDMA system. The system characteristics such as multiple classes of services, multiple kinds of channels with different bandwidths, overlaid cell structure, etc. are examined to make way for the problem definition. The problem is formulated as a constrained optimization model, the objective of which is to consume as narrow bandwidth as possible while satisfying various multimedia demands with required QOSs. A solution algorithm is developed which generates two sets of optimal decisions: 1) which combination of service classes to assign to each cell, 2) which set of frequency channels of varying bandwidths to allocate to each cell. The effectiveness of the proposed deployment policy is demonstrated via computational experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.227-232
• /
• 2000

This study applied asynchronous W-CDMA(3GPP) system that is suggested as an access method of IMT-2000, multimedia communication in next generation, and estimated fading channel by using pilot symbol different from traditional IS-95. And then, it applied PIC(Parallel Interference Cancellation) as multiple access interference cancellation and analyzed performance depending on the power rate between DPCCH(Control) and DPDCH(Data). As a result of simulation, it showed the best performance in C:D = 3:7 and 4:6, where set up as five users in case of hand design, and showed the best performance in C:D = 3:7, where did as ten users.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.351-359
• /
• 2009

A wireless MAC scheduler for CDMA2000 IxEV-DO that provides a high level of quality-of-service(QoS) for video-on-demand(VOD) applications while achieving a reasonable level of system throughput is proposed, The proposed scheduler that exists in the MAC layer utilizes the video data information that resides in the application layer such that it improves the QoS for VOD applications. We show by simulations that our approach is better than the previous scheduler which is also based on video traces for VBR videos that have high variability between video frames.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.249-253
• /
• 2006

We propose a new beamforming algorithm, which is based on simplex downhill optimization method in the presence of pilot channels in cdma2000 reverse-link, for the rake structure antenna array in DS/CDMA communication system. Our approach uses the desired signal(pilot) covariance matrix and the interference covariance matrix. The beamforming weights are made according to maximum SINR criteria using simplex downhill optimization procedure. Our proposed scheme provides lower computational load, better convergence speed, better performance than existingadaptive beamforming algorithm. The simplex downhill method is well suited to finding the optimal or sub-optimal weight vector, since they require only the value of the deterministic function to be optimized. The rake beamformer performances are also evaluated under several set of practical parameter values with regard to spatial channel model. We also compare the performance between conventional rake receiver and the proposed one under same receiving power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1486-1491
• /
• 2000

A Multicarrier system required a lower speed paralled-type of signal processing in contrast to a fast serial processing in a single carrier CDMA system. For the analysis we evaluate MC-CDMA system performance with that of a single-carrier CDMA system and a multi-carrier CDMA system based on the various jamming conditions. Also we studied to the capacity level against the threat environment through the performance comparison in commercial CDMA system and Limiting repeater system. as a result we found that M-CDMA system has a robustness to narrowband interference and multipath environments like as a Rayleigh fading.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.70-80
• /
• 1997

In this paper, the performances of two noncoherent code tracking loops, i. e., traditional code tracking loop(TCTL) and modified code tracking loop(MCTL) are analyzed and compared in a CDMA mobile environment. Closed-form formulas for steady-state jitter variance are derived analytically for the two schemes as a function of the pulse shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth. The design issues of the loop filter are also addressed with emphasis on the second-order tracking loop. Finally, the degradation of BER performance due to timing errors is examined in a CDMA reverse link for IMT-2000 designed by ETRI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.996-1004
• /
• 1999

In this paper, we evaluate the performance of reverse link synchronous CDMA with orthogonal spreading and Rake combining, and compare this to that of an asynchronous transmission under Rayleigh multipath fading environments. The link performance is evaluated in terms of average bit error rate (BER) and capacity, assuming ideal BPSK data modulation. The focus of this paper is on the impact that the multipath intensity profile (MIP) shape and number of taps in Rake receiver have on the performance of synchronous transmission. The results show the reverse link synchronous transmission can always achieve smaller BER than the asynchronous transmission even if inter-path interference exists.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.645-655
• /
• 1997

In this paper, the performance of the noncoherent code tracking loop designed at baseband for CDMA applications is analyzed in detail and is confirmed by computer simulations. Analytical closed-form formula for jitter variance is derived for AWGN channel environments as a function of pulse shaping filter, timing offset, signal-to-interference ratio, and loop filter coefficients. The design issue of the loop filter is also addressed with emphasis on the second-order tracking loop. Finally, the performance of the designed tracking loop is examined by computer simulations for both AWGN and Rayleigh fading channels, when applied to the reverse link of the coherent CDMA system for IMT-2000 designed by ETRI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.138-143
• /
• 2005

This paper aims to optimize an access probe algorithm for the CDMA 2000 system. The incremental value of PWR_STEP increases as NUM_STEP as 1dBm±0.2 for access probe of the area with good receiving sensitivity when the mobile station transmits via access channel and does not receive any ACK message. However, for the area with weak receiving sensitivity, according to the algorithm of open-loop power control, the transmitting power amplifier becomes saturated and PWR_STEP incremental value keeps performing access probe to 0dBm±0.2. Therefore interference and battery consumption increases according to the transmission of the mobile station. We have optimized the access probe algorithm according to the receiving sensitivity. We transmit the incremental value of access probe power, with delaying as much RT slot value as indicated by IS-95C standard in case of good receiving sensitivity and with delaying RT+l slot value in case of weak receiving sensitivity. Simulation results showed that the proposed algorithm contributes to decrease of the interference and battery consumption according to the transmitting power of the mobile station and improves the call duration.