• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.389-393
• /
• 2003

This paper describes the design of enhanced TSSI RF Power Detector which has wide dynamic range using switch and Log amp. This Power Detector consists of low and high gain loops, and they adaptively switched by output DC voltage which is proportioned to input power level. Because Power Detector needs to separate the channel, so architecture is heterodyne system having 70MHz intermediate frequency. This proposed RF Power Detector is settle to the satisfaction of Closed loop power control system for W-CDMA optic repeater, and the obtained dynamic range cover the higher than 50dB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.34-39
• /
• 2007

UWB(Ultra Wide Band) system for high speed and high accurate location has been studying actively. This paper presents the design and implementation of RF transceiver for DS-CDMA(Direct Sequence-Code Division Multiple Access) UWB device. Major components of RF transceiver such as Low Noise Amplifier(LNA) and Band Pass Filter(BPF) are designed and then fabricated to meet wideband characteristics. The RF transceiver was implemented by the use of the fabricated components and commercial devices after carrying out performance simulation. Through the performance evaluation of the UWB RF transceiver with W-CDMA signal, the approach of design, implementation and evaluation of RF transceiver which is available to DS-CDMA UWB system is verified.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.59-66
• /
• 2008

In this study, Software Defined Radio (SDR) technology-based digital filterbank architecture applicable to a multiple-channel processing system such as a wireless mobile communication system using Code Division Multiple Access (CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response (FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter (BPF) to reconfigure another system. The feasibility of the algorithm is verified by computer simulation and by implementing a multiple-channel signal generator that is reconfigurable to other system profiles, including those of a Wideband Code Division Multiple Access (WCDMA) system and a CDMA system.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.593-600
• /
• 2002

The reverse link signal power required for multimedia traffic in multipath faded single-code (SC-) and multi-code CDMA (MC-CDMA) systems is investigated. The effect of orthogonality loss among multiple spreading code channels is herein characterized by the orthogonality factor. The required signal power in both the CDMA systems is then analyzed in terms of the relative required signal power ratio of data to voice traffic. The effect of varying system parameters including spreading bandwidth, the of orthogonality factor, and the number of spreading codes are examined. Analytical results show that MC-CDMA users transmitting only a single traffic type require significantly more power than SC-CDMA users with only a single traffic type. On the other hand, MC-CDMA users transmitting multimedia traffic require power levels approximately identical to SC-CDMA users with multimedia traffic. The results can be used in the design of radio resource management (e.g., power allocation) scheme for wireless multimedia services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1005-1012
• /
• 2004

In this paper, we have analyzed minimum performance required for W-CDMA Handset from standard and Implemented the receiver for W -COMA Handset. We have derived the noise figure and IIP3 of receiver and determined the selectivity about adjacent channel and minimum performance for front-end stage. Before the Implementation, we have verified the performance using AOS simulator In conclusion, we have implemented the receiver for W-COMA Handset using the heterodyne architecture and performed measurement. Therefore, this paper wlll gIVe a guideline for design of the W -COMA Handset.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2713-2717
• /
• 2011

To transmit data from straggling sensors in water-processing basic industries etc., used Binary-CDMA system has safety voluntarily. But Binary-CDMA is necessity that react very sensitively in environment change as defense about hacking and cracking of various way that change suddenly. Therefore, this paper is that see added cryptographic algorithm for safety and easy update on correlator that a bottle-neck phenomenon is happened in Binary-CDMA to solve problem that is such. Added cryptographic algorithm does to communicate safe information in channel that is not safe as that achieve 1:1 confrontation for sensors by symmetric cryptographic algorithm.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.75-82
• /
• 2000

In this paper, described is the comparison of performances based on the computer simulation under IMT-2000 environment between multicode and multicarrier CDMA system for the design of wireless systems using wideband CDMA technology. From simulation results, it can be concluded that both multicode and multicarrier CDMA scheme show comparable performances. Diversity scheme of RAKE receiver is indispensible for both multicode and multicarrier CDMA systems under IMT-2000 outdoor B and vehicular B channel environment. Either Hadamard matrix or PN sequence can be used as the orthogonal code as far as the orthogonality is kept. Finally, with increasing chip rate and less users, performance is getting better.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2619-2627
• /
• 2012

The electronic float flow pattern system can predict a rate of flow of river by monitoring a location of float in remote with location measurement technology and a variety of communication technology. Now, to analyze the flow pattern of the natural streams, we use the manual floats in many forms. The measurement of a rate of flow using a manual float measures the distance and time of the manual float directly and uses it. It is inefficient for measurement method and exact a rate of flow of river. To overcome this problems, we designed and implemented the electronic float using CDMA, GPS, and RF module. Then, to get the location information and a rate of flow information, we designed and implemented the monitoring system for the electronic float flow pattern. The short life cycle of electronic float using the battery decreases the utility of the electronic float flow pattern system. Then, we design the power saving method to reduce the power of the electronic float in electronic float flow pattern system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.2
• /
• pp.117-125
• /
• 2003

In this paper, we propose a new code acquisition architecture having the features of low complexity and high speed for the MC-CDMA system. The newly designed searching finger has function of the searcher as well as the finger. The searching finger tests the PN code Phase as the searcher during the initial acquisition, and as the finger after the initial acquisition. The proposed system has reduced the average acquisition time of the PN codes to $T_{acq}$/19 in the 20MHz MC-CDMA system with 75% reduction of H/W complexity.y.