• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.496-503
• /
• 2001

The suspension of the optical pickup actuator is damped by the presence of silicone rubber damper bond at its termination. In spite of the presence of it, the actuator still exhibits a strong mechanical resonance which affects its settling time and vibrational characteristics. This resonance can cause errors in reading information from the disk, particularly in high speed CD-ROM and DVD-ROM drives. Ferrofluids are stable colloidal suspensions of sub-micron sized magnetic particles in a carrier liquid. In the actuator design, ferrofluid is applied to the surface of the magnets until the quantity is sufficient to maintain intimate contact with the bobbin/carrier assembly. The fluid is retained in the magnetic field and its viscosity provides the desired mechanical damping to the moving assembly, improving the actuators settling time and vibrational characteristics. Access time is also improved, particularly on warped or eccentric discs.

• Journal of the Korean earth science society
• /
• v.25 no.5
• /
• pp.336-347
• /
• 2004

This study investigated the effects of the application of a variety of ICTs cause the effects on self-directed learning capability, creativity and problem-solving ability. In order to achieve the above aim, Web-Based Instructions(WBI) and instructions using CD-ROM Titles for the unit of 'the solar system and the galaxy' were applicated and analyzed which belongs to the area of 'the earth' in the subject 'science' for high school students. Instructions using WBI materials and CD-ROM titles were found to be effective on 'self-conception', 'creativity', 'future inclination', 'self-assessment ability', 'openness' and' initiative' improvement all of which belong to self-directed learning characteristics. They did not, however, show meaningful effect on improving 'learning eagemess' and 'responsibility' improvement. On looking into self-directed learning characteristics according to prerequisite learning levels, both groups and these for instruction using CD-ROM learning materials were found to have no effect on interaction. With respect to problem-solving ability improvement which is characteristic of the instruction using ICTs, WBI proved more fruitful than instruction using CD-ROM titles on improving scholastic achievement level. WBI was effective on 'fluency', 'originality' and 'resistance to premature closure'. It on the other hand, was of no use on 'abstraction of titles' and 'elaborateness' These results came from the following characteristics: WBI came into effect on 'fluency' and 'originality' in the areas of variety and vitality, which are characteristic of WBI. In the area of resistance to premature closure WBI was effective on organizing learning contents owing to the animation of picture materials which are variously presented in the web site. As a result of WBI questionnaire about WBI, an excellent effect on the structure of display, quantity of information, indication and instruction, supplementary study and further study were discussed.

• Journal of Korean Society of Archives and Records Management
• /
• v.5 no.2
• /
• pp.167-182
• /
• 2005

The beginning of digitization activities in the National Library of the Czech Republic are interconnected with the first periods of existence of the UNESCO Memory of the World programme. It was in 1992 when the library accepted the UNESCO proposal to prepare a pilot CD ROM publication for the programme showing the most precious items from its collections. In 1993 - 1995, the publication was followed by two another titles, which presented two medieval manuscripts in their entirety, providing both all the image documentation and scientific description of various features of the original documents. The digitization centre specialized in processing of old manuscripts and old printed books in co operation with the Czech AIP Beroun Company. Nowadays, these two national programmes in which dozens of Czech and also several foreign institutions take part - are represented on their access side by two digital libraries: Manuscriptorium and Kramerius.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.346-352
• /
• 1998

This paper presents actuating characteristics of an asymmetric high-speed optical pick-up fine actuator that can be installed in a small area such as a notebook personal computer. In the asymmetric actuator four points (mass center, actuation center, supporting point of wire suspension on a bobbin, and optical axis) are not coincident so that the proposed actuator suspension reveals undesirable suspension resonance in the pitch and yaw direction. Lumped parameter dynamic model in each direction is used to investigate the driving characteristics with respect to relative location of the four points. Some of desired design directions toward reducing resonance peaks are suggested by using sensitivity information. In order to avoid undesirable resonance, at least supporting point on the obbin must be located in the middle of the mass and actuation center of the asymmetric pick-up actuator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2513-2519
• /
• 2000

Free vibration characteristics of an initially stressed CD/DVD disk, which is designed for increasing critical speeds of current optical disks, are analyzed using the Rayleigh-Ritz technique based on variational formulations. Natural frequencies of the new disk depend on membrane stresses caused by disk rotation as well as residual stresses imposed during the cooling process of the injection molding. Critical speeds are calculated for the various initial patterns of radial and circumferential stresses. Initially imposed tensile stresses increase the natural frequencies of all the vibration modes except zero nodal diameter mode, whose natural frequency is independent of circumferential stress. A new disk with initial tensile stress of 0.5MPa is shown to have its critical speed about 30 % higher than the current optical disk.

• Archives of design research
• /
• v.15 no.3
• /
• pp.137-148
• /
• 2002

As human-centered design has become new paradigm in the field of design, it is also needed to apply scenario-centered design methodology in planning and design new multi-media contents. In this paper, scenario-centered design process for multimedia contnets planning ＆ design was identified through a case study of contents design of internet shopping mall "Shop 'n' Chat". The study was preceded with three kinds of scenarios during design process, which are present situation scenario to find needed contents, behavior prototype scenario to make contents concrete, and future usage scenario to design visual interface. These three stages of scenario are exampled by of finally shopping scenario between 20's girls, internet shopping scenario with using messenger, and finally navigation/interaction scenario in future internet shopping mall.

• Journal of the Korean Society for Library and Information Science
• /
• v.32 no.2
• /
• pp.121-142
• /
• 1998

Based on the comprehensive literature search and the sample library surveys, some observations are made on the impact of online information technologies for reference services. Various issues specifically with OPAC, CD-ROM, remote database access, and internet environment are overviewed as the source of and trigger for change in reference librarianship and in terms of expectations as well as difficulties. The paper then focuses on how these technologies influence on the roles of reference librarians as intermediaries in information providing, instructing, consulting, and evaluating functions. This leads to rethinking the conceptual basis of today's reference service and the competencies for reference librarians with new functions and responsibilities.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.1
• /
• pp.10-16
• /
• 2004

There are a lot of roots of errors in a motion of the optical pick-up actuator being one of the most significantcomponents in a CD-ROM drive. Most of the studios recently performed have a tendency to seek for the causes from an actuator itself. This paper presents dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive linear equations of motion with respect to the rectangular coordinate. We found that the ranges of the natural frequencies of a feeding deck and the actuator are close to each other. The time responses are also computed by the Newmark method and Runge-Kutta method. The result show that it is important effect to consider feeding deck in modeling and designing an optical pick-up.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.92-97
• /
• 2002

There are a lot of roots of errors in an motion of the optical pick-up actuator being one of the most significant components in a CD-ROM drive. Most of the studies recently performed have a tendency to seek for the causes from an actuator itself. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive the linear equations of motion with respect to the rectangular coordinate. We found the fact that the ranges of the natural frequencies of a feeding deck and an actuator are close to each other. And the time responses are also computed by the Newmark method and Runge-Kutta method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.316.2-316
• /
• 2002

There are a lot of roots of errors in the motion of the optical pickup actuator being one of the most significant components in the CD-ROM drive. Most of the studies recently performed have a tendency to seek fur the causes from an actuator itself. We found the fact that the range of the natural frequencies of a feeding deck and an actuator is close each other through an experiment. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. (omitted)