• Korean Journal of Pharmacognosy
• /
• v.14 no.4
• /
• pp.197-200
• /
• 1983

This study is concerned with quality and analysis of nutritive value of commercially available honey and pollen load. Of thirteen kind of commercially available honeys, acid levels were less than KP IV standard. Color reaction for ammonia, resorcine and varium chloride was negative and trace of starch and dextrine was not detected. There were no extraneous materials in honey samples. Specific gravity of sample was slightly higher than KP IV standard. Total ash lied between 0.01 and 0.15% of honey weight which was less than KP IV standard, except 0.56% of Castanea Honey. Studies on mineral compositions (AAS) for honeys and pollen loads showed that $Na^+,\;K^+,\;Ca^{2+},\;Fe^{2+}\;Cu^{2+}\;and\;CO^{2+}$ were the most commonly occuring minerals. Pollen loads showed higher levels of mineral contents than honeys. Castanea Honey revealed rich in minerals. $Cd^{2+}\;and\;Pb^{2+}$ were found relatively higher level in Robinia Honey. Reducing sugar level showed $60{\sim}70$ in honeys and $25{\sim}30$ in pollen loads. Non reducing sugar varied between 2 to 7% in pollen loads.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.585-585
• /
• 2012

$Cu(In_{1-x}Ga_x)Se_2$(CIGS) 박막 태양전지는 Chalcopyrite 계 박막 태양전지로 Cu, In, Ga, Se 각 원소의 조성을 적절히 조절하여 박막을 성장시킨다. 성장시킨 CIGS 박막은 광흡수계수가 $10^5cm^{-1}$로 다른 물질보다 뛰어나고 직접 천이형 반도체로서 얇은 두께로도 고효율의 박막 제작이 가능하다. CIGS 태양전지를 제조하는 방법은 3-stage 동시 증착법, 금속 전구체의 셀렌화 공정법, 전기 증착법 등이 있다. 그 중에 금속 전구체의 셀렌화 공정법은 다른 제조 방법에 비해 대면적 생산에 유리한 장점이 있다. 하지만 아직 상대적으로 3-stage 동시 증착법에 비해 낮은 에너지 변환 효율이 보고된다. 본 실험에서는 기존의 금속 전구체의 셀렌화 공정법과는 달리 전구체 증착과 셀렌화 공정을 동시에 하고, Se cracker를 통하여 Se 원료를 주입하는 방식인 반응성 스퍼터링 공정에서 reservoir zone의 온도 변화에 따른 특성을 분석하였다. Se cracker의 reservoir zone 온도가 증가할수록 Cu/(In+Ga) 비가 증가한다. CIGS 박막 태양전지의 구조는 Al/Ni/ITO/i-ZnO/CdS/CIGS/Mo/Soda lime glass이다. CIGS 박막의 조성비가 Cu/(In+Ga)=0.89, Ga/(In+Ga)=0.17인 박막 태양전지에서 개방전압 0.34 V, 단락전류밀도 $32.61mA/cm^2$, 충실도 56.2% 그리고 변환 효율 6.19%를 얻었다. 본 연구는 2011년도 지식경제부의 재원으로 한국에너지 기술평가원(KTEP)의 지원을 받아 수행한 연구 과제입니다(No.20093020010030).

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.397-404
• /
• 1995

Three Arsenazo I-XAD Chelating resins, with different surface areas and pore sizes were synthesized and characterized. The total sorption capacities of these chelating resins for Cu(II) at pH 5.0 by batch method decreased as follows, Arsenazo I-XAD-16(0.59mmol/g)>Arsenazo I-XAD-4(0.56mmol/g)>Arsenazo I-XAD-2(0.38mmol/g). The sorption and desorption properties of Arsenazo I-XAD-16 chelating resins for U(VI), Th(IV), Hf(IV), Zr(IV), Ni(II), Mn(II), Cd(II). and Cu(II) were studied by both batch and elution method. The Arsenazo I-XAD-16 chelating resin was successfully applied to the separation and concentration of trace U(VI) and Th(IV) in sea and waste waters.

• Journal of the Korean Society of Costume
• /
• v.56 no.6 s.105
• /
• pp.87-95
• /
• 2006

This is a study regarding the development of Cultural Products with Applied Koguryo Wadang Patterns. The objective of this study is in developing unique Cultural Products which combine traditional Korean images with modern feel by utilizing Koguryo Wadang patterns. The among Korean traditional patterns which implicit the sense of beauty and modeling, chose and investigated the Wadang patterns of the Koguryo. And from it, studied about the originality and characteristics of the Koguryo Wadang patterns. In this characteristics of the Wadang pattern, the representative lotus design pattern was based and reorganized to fine the probability of the modern expression using traditional patterns. After design plans were made for each works, natural dyes were used to dye(dip dyeing, printing) the fabrics(cotton:Kwang-mok) by theme. Approximately 16 pieces of Cultural Products that can be used in daily life were created using Koguryo Wadang patterns, including Traffic or credit card cases, Name card cases, Pouches, CD cases, Cushions, Bags, Purses, Vest, Muffler. In addition, the increased quality of the products will be a competitive edge in the world market where products compete with no national bounds.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.1
• /
• pp.44-56
• /
• 2012

Autonomous Underwater Vehicles (AUVs) provide a useful means of collecting detailed oceano-graphic information. The hull resistance of an AUV is an important factor in determining the power requirements and range of the vehicle. This paper describes a procedure using Computational Fluid Dynamics (CFD) for determining the hull resistance of an AUV under development, for a given propeller rotation speed and within a given range of AUV velocities. The CFD analysis results reveal the distribution of the hydrodynamic values (velocity, pressure, etc.) around the AUV hull and its ducted propeller. The paper then proceeds to present a methodology for optimizing the AUV profile in order to reduce the total resistance. This paper demonstrates that shape optimization of conceptual designs is possible using the commercial CFD package contained in Ansys$^{TM}$. The optimum design to minimize the drag force of the AUV was identified for a given object function and a set of constrained design parameters.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.47-56
• /
• 2008

Temporal changes of metal solubility have been repeatedly observed in soils equilibrated with metal salt solutions. This phenomenon is known as aging, yet factors that affect the degree of metal aging remain largely unexamined. In this study, we compared the extent of aging on metal partitioning depending on soil, metal, and metal loading. Five soils spiked with four levels of Cd (2.5-20 mg ${kg}^{-1}$), Cu, and Zn (50-400 mg ${kg}^{-1}$) salt solutions were aged in the laboratory up to 1 year. The partitioning coefficient ($K_d$) of each metal was calculated from the ratio of total to dissolved metal concentration in samples collected at times ranging from 1 day to 1 year. The highest $K_d$ values for Cd, Cu and Zn were recorded in a Histosol, Andisol, and fine-textured Alfisol, respectively, whereas the lowest $K_d$ was recorded for an Oxisol and coarsetextured Alfisol. For all soils, a pattern of increasing Kd with aging was evident for Cd and Zn, but not Cu. Rapid Cu sorption was limited when dissolved organic matter was high in soils. In highly-retentive soils, $K_d$ values seemed to be insensitive to metal loading, although a longer period was required for the higher metal loadings to reach the same degree of metal aging as the lower loadings. In soils with low sorption capacity, the $K_d$ values were determined more by metal loading than by aging. Therefore, marked differences can be expected in the degree of metal aging in spiked soils by the soil type, metal and amount of metal added.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.236-241
• /
• 2015

This study was performed to survey and evaluate the contents of pH, total acidity, caffeine, harmful metals (Pb, Cd) and total polyphenol in coffee extraction. In total, coffee bean. Total fifty coffee samples were analysed. A 5 g portion of roasted ground coffee samples were extracted in coffee-maker with 100 mL of distilled water and the extraction were used in all experiments. The pH range was 4.72~5.25 (mean value = 4.99). According to increase of the roasting temperature, the pH were shown a tendency to increase. The contents of total acidity was 0.72~2.25% (mean value = 1.59%). According to increase of the roasting temperature, the contents of total acidity were shown a tendency to decrease. The contents of harmful metals (Pb, Cd) in coffee extractions were determined by ICP. The average contents of Pb and Cd were 0.0112 and 0.0011 mg/kg, respectively. The contents of caffeine in coffee extractions were determined by HPLC, the range of detection was 0.51~20.28 mg/mL (mean value = 12.29 mg/mL). According to increase of the roasting temperature, the contents of caffeine were shown a tendency to increase. The contents of total polyphenol in coffee extractions were determined by spectrophotometer, the range of detection was 18.88~43.90 mg/mL (mean value = 31.94 mg/mL). According to increase of the roasting temperature, the contents of total polypenol were shown a tendency to decrease.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.1
• /
• pp.55-60
• /
• 1997

Heavy metal-tolerant microorganisms, such as Pseudomonas putida, P. aeruginosa, P. chlororaphis and P. stutzeri which possessed the ability to accumulate cadmium, lead, zinc and copper, respectively, were isolated from industrial wastewaters and mine wastewaters polluted with various heavy metals. The distribution of heavy metal in the cell components, and amino acid compositions, was investigated. The distribution of heavy metal in the cell fractions of each heavy metal-tolerant microorganism grown for 20 hours in the basal medium containing 100mg/l of each heavy metal was investigated. In the case of cadmium-tolerant P. putida, lead-tolerant P. aeruginosa and copper-tolerant P. stutzeri, approximately $50{\sim}60%,\;30{\sim}40%$ and $10{\sim}17%$ of each heavy metal absorbed were distributed to cell wall, cell membrane and cytoplasm fractions, respectively. In the case of zinc-tolerant P. chlororaphis, approximately 32%, 55% and 13% of zinc were distributed to cell wall, cell membrane and cytoplasm fractions, respectively. These results indicated that the cell wall was a major adsorbing fraction of cadmium, lead and copper, and the cell membrane was that of zinc. Total amino acid content per gram of the cell grown in the culture media with heavy metal was higher than that of the cell grown in the culture media without heavy metal, and the content of acidic amino acids, such as aspartic acid(Asp.+Asn.) and glutamic acid(Glu.+Gln.) was higher than that of basic amino acids, such as histidine, lysine and arginine.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.6
• /
• pp.394-405
• /
• 2016

Objectives: The survival outcomes of antiretroviral treatment (ART) programs have not been systematically evaluated at the state level in India. This retrospective study assessed the survival rates and factors associated with survival among adult human immunodeficiency virus (HIV)-infected patients in Andhra Pradesh, India. Methods: The present study used data from 139 679 HIV patients aged ${\geq}15$ years on ART who were registered from 2007 to 2011 and were followed up through December 2013. The primary end point was death of the patient. Mortality densities (per 1000 person-years) were calculated. Kaplan-Meier and Cox-regression models were used to estimate survival and explore the factors associated with survival. Results: The overall median follow-up time was 16.0 months (2.0 months for the deceased and 14.0 months for those lost to follow-up). Approximately 13.2% of those newly initiated on ART died during follow-up. Of those deaths, 56% occurred in the first three months. The crude mortality rate was 80.9 per 1000 person-years at risk. The CD4 count (adjusted hazard ratio [aHR],4.88; 95% confidence interval [CI], 4.36 to 5.46 for < $100cells/mm^3$ vs. > $350cells/mm^3$), functional status (aHR, 3.05; 95% CI, 2.82 to 3.30 for bedridden vs. normal), and body weight (aHR, 3.69; 95% CI, 3.42 to 3.97 for <45 kg vs. >60 kg) were strongly associated with the survival of HIV patients. Conclusions: The study findings revealed that high mortality was observed within the first three months of ART initiation. Patients with poor baseline clinical characteristics had a higher risk of mortality. Expanded testing and counseling should be encouraged, with the goal of ensuring early enrollment into the program followed by the initiation of ART in HIV-infected patients.