• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.27-36
• /
• 2005

Most of flated scanners and digital cameras in prepress process utilize CCD technology. Device calibration and characterization process is needed to transform the device dependent color to the device independent color. ICC profiles for digital input devices encapsulated information relating the device values to CIELAB or CIEXYZ coordinates. The main purposes of this article is to evaluate some of the transformation methods based on ICC proposed device profiles and to propose optimal color transformation method for accurate color imaging in printing process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.166-168
• /
• 2009

In this paper, we studied fire sensing and position tracing system in fire region. The coordinates of fire position is communicated to fire suppression system immediately. And the fire is suppressed by this system effectively. For the purpose, the fire occurrence region images are extracted with two different CCD surveillance cameras and fire occurrence are sensed, I suggested a method to measure the fire occurrence position. It was able to be sensed early experiment result fire outbreak and, I was able to understand a fire outbreak position coordinate at the moment when a fire occurred and, I confirmed that I could accomplish warning official announcement and fire suppression in an auto.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.96.4-96
• /
• 2002

Thermal infrared imaging is a highly promising technology for condition monitoring and predictive maintenance of electronic, electrical and mechanical elements in nuclear power plants. However, conventional low-cost infrared imaging systems suffer from poor spatial resolution compared to commercial CCD cameras. This paper describes an approach to enhance inspection performances for calandria reactor area of Wolsung nuclear power plant through the technique of superimposing thermal infrared image into real CCD image. In the occurrence of thermal abnormalities on observation points and areas of calandria reactor area, unusual hot image taken from thermal infrared camera is mapped upon re...

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.137-142
• /
• 2001

Since recent production system becomes that of the small quantity, large volume with high quality production, accurate and high speed inspection system is required. In such situation, noncontact 3D measurement system which utilized CCD cameras is useful technique in terms of system cost, speed of data acquisition, measuring accuracy and application. However, it has low accuracy compared with contact 3D measurement system because of the camera distortion, non uniformity of laser distribution and so on. For those reasons, in this paper precision enhancement method is studied considering radial camera distortion, and laser distribution. A distortion correction method is applied even to the standard lens. The laser slit beam trajectory is determined by 3 method: based of the Gaussian function signal approximation, the median method, the center of gravity method and the peak point of the Gaussian function method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.578-578
• /
• 2002

Thermal infrared imaging is a highly promising technology for condition monitoring and predictive maintenance of electronic, electrical and mechanical elements in nuclear power plants. However, conventional low-cost infrared imaging systems suffer from poor spatial resolution compared to commercial CCD cameras. This paper describes an approach to enhance inspection performances for calandria reactor area of Wolsung nuclear power plant through the technique of superimposing thermal infrared image into real CCD image. In the occurrence of thermal abnormalities on observation points and areas of calandria reactor area, unusual hot image taken from thermal infrared camera is mapped upon real CCD image. The performance of the technique has been evaluated in the experiment carried out at Wolsung nuclear power plant in the overhaul period. The results show that localizations of thermal abnormalities on calandria reactor face can be estimated accurately.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.698-706
• /
• 2000

It is very difficult to mechanize tomato harvesting because identifying a tomato partly covered with leaves and stalks is not easy. This research was conducted to develop tomato harvesting robot which can identify a target tomato, determine its three dimensional position, and harvest it in a limited time. Followings were major findings in this study. The first visual system of the harvesting robot was composed of two CCD cameras, however, this could not detect tomatoes which are not seen on the view finder of the camera especially those partly covered by leaves or stalks. The second visual device, combined with two CCD cameras and pan/tilt procedures was designed to minimize the positioning errors within ${\pm}10mm$, but this is still not enough to detect tomatoes partly covered with leaves etc. Finally, laser distance detector was added to the visual system that could reduce the position detecting errors within 10mm in X-Y direction and 5mm in Z direction for the partly covered tomatoes.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.935-942
• /
• 2011

본 연구는 카메라를 통하여 취득한 지화를 자동으로 인식하고, 컴퓨터를 제어하는 지화인식 시스템을 설계하고 구현하는데 목적이 있다. 먼저 영상을 취득하기 위하여 일반 카메라를 개조하여 적외선 CCD 카메라를 제작하였고, 입력영상의 전처리와 손의 특징들을 찾아 분석하여 손 모양에 따라 해당되는 지화를 판독하고, 이벤트를 발생시켜 마우스 제어와 프리젠테이션을 수행할 수 있는 방법을 제시하였다. 본 연구에서 제안하는 지화인식 시스템은 미래형 정보기기의 마우스와 키보드를 대체할 수 있는 차세대 인터페이스로서의 사용가능성을 검증하였다.

• 한국측량학회지
• /
• 제14권1호
• /
• pp.17-25
• /
• 1996

스틸비디오 CCD카메라는 수치영상의 획득과정이 크게 단순화되어 컴퓨터에 직접 연결되지 않고도 독립적으로 수치영상을 획득하여 자체내에 영상을 저장할 수 있는 융통성을 갖추고 있다. 본 연구에서는 각종 산업분야에서 요구되는 품질검사, 구조물의 모니터 링 등에 스틸비디오 카메라를 이용한 수치근접사진측량 시스템의 수행성을 평가하고자 하였다. 수치 영상측정 에서 필수적 인 sub-pixel 측정기 법을 제시하고, 고해상도의 DCS420 스틸비디오 카메라에 대한 기하학적 자체검정 및 구조물에 대한 시험측정을 실시하였다. 자체검정 광속조정의 결과 1:46,000을 초과하는 대상공간 정확도를 얻을 수 있었으며 산업적 음용에 수치영상을 이용한 본 근접사진측량 시스템의 정확도 잠재성과 작업의 효율성을 입증할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1152-1154
• /
• 2003

The needs of 3-D data have been increasing for various applications like visualization, 3-D modeling, planning and management as well as entertainment. Mobile mapping has become a quick and practical means for acquiring necessary 3-D data for above-mentioned applications. A mobile mapping system mainly consists of two main components, viz. data acquisition devices and positioning devices. The data acquisition devices consist of CCD cameras or/and laser scanners. The positioning devices consist of GPS, INS, Odometer (shaft encoder) and some other referencing devices. The overall accuracy of mobile mapping system depends on the accuracy of positioning devices and their integrated output. Though, GPS is the main input device for the position information, the signal is not available for the computation of position all the times in urban area. The GPS satellites are normally obstructed by high-rise buildings. Thus it is very important to understand the accuracy of such a system in different environments and means to solve such problems. We have developed a mobile mapping system called VLMS (Vehicle-borne Laser Mapping System), which consists of CCD Cameras, Laser scanners, GPS, INS and Odometer. In this paper, we will present and discuss the accuracy of this system with data acquired in different environments (open area, urban area, tunnel, express way etc) by analyzing the data with respect to other existing digital data.

• 한국측량학회지
• /
• 제21권3호
• /
• pp.245-254
• /
• 2003

줌 렌즈 CCD 카메라는 사용상 많은 장점을 갖고 있으나 기하학적으로 불안정하여 카메라 검정이 어려운 문제점을 가지고 있으며 이것은 일반적으로 알려진 것과 같이 줌 카메라의 변수가 줌 위치에 따라 변화하기 때문이다. 본 연구에서는 줌 렌즈 CCD카메라의 변수계산과 3차원 위치정확도를 평가하기 위하여 Abdel-Aziz와 Karara가 제안한 DLT기법과 Tsai 기법을 비교분석하였다. 그 결과, 기준점을 대상물이 위치한 공간에 함께 배치할 경우에 Tsai와 DLT모델식에 의한 3차원 위치정확도는 두 방법 모두 비슷하였으나, 기준점과 대상물이 이격되는 경우 DLT에 비해 Tsai가 더 안정적임을 알 수 있었다. 따라서, 그 동안 많이 사용해 온 DLT기법의 변수 최적화를 위한 추가적인 연구가 3차원 위치 정확도 향상을 위해 필요하다고 판단된다.