• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.158-163
• /
• 2008

UV기술에 기반한 오존모니터는 신호의 안정성 때문에 널리 활용되어오고 있다. 먼저 오존 발생기에서 나오는 오존농도를 실시간, 고정 밀로 측정하기 위해서 저압 수은램프를 UV광원으로 하고, 광증배관을 UV 감지기로 하는 시스템을 구성하였다. 이 구조는 저 비용의 고농도 오존의 계측에 유용한 시스템으로서 단순한 구조와 비교적 우수한 계측성 능을 얻을 수 있었다. 제조된 시스템은 $0.05{\sim}2w1.%$의 측정 농도영역에서 좋은 선형성을 나타내었다. ppm정도의 보다 정밀한 농도계측을 위해서는 UV광원으로서 고출력 펄스 크세논램프를 사용하고, CCD어레이를 광스펙트로메터로 사용하도록 시스템을 설계하였다. CCD출력으로부터의 광신호는 우수한 반응성과 띄어난 광해상도를 가지고 디지털신호로 변환되고, 이 디지털신호는 PC의 스크린에 디스플레이 되도록 설계되었다. 제작된 시스템은 $10{\sim}10,000ppm$ 영역에서 선형적이고 우수한 감도를 보였으며 저 농도의 오존을 측정하는 시스템으로서의 가능성을 보여주었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.49-52
• /
• 2003

Two types of ozone monitors using UV absorption method were tried in consideration of cost of the monitor and precision in measuring. The high concentration ozone monitor for high concentration real time ozone monitoring from ozone generator was composed of a low pressure mercury lamp as UV source, a photo multiplier tube as UV detector and signal processing unit for the most part. This structure could be very useful for low price high concentration ozone monitor due to simple system structure and fairly good monitoring characteristics. The developed system showed good linear output characteristics to ozone in the measuring concentration range of 0.05 and 2 wt.%. For accuracy ambient ozone monitoring in ambient in ppm level, the system composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit in brief speaking was proposed our study for the first time in the world. The developed system showed good linearity and sensitivity in relative low measuring range between 10ppm and 10,000ppm, and showed some feasibility of high resolution ozone monitor using CCD array as photodetector.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.31-35
• /
• 2008

목적: 본 논문은 CCTV 카메라용 렌즈 설계를 triplet형으로 광학 설계를 하였다. 방법: 초점거리를 56 mm, 유효경을 20 mm 그리고 화각을 $5^{\circ}$로 한 망원 렌즈 형태이고, 설계하고자 하는 카메라의 CCD array detector의 크기를 2/3인치로 하였다. 결과: 광학계의 성능은 ray-fan과 spot diagram 그리고 회절 광학적인 MTF를 계산하여 평가하였고, 파장은 Fraunhofer C, d 및 F-line에 대해 achromat 되었으며 MTF 값도 tangential과 sagittal MTF 모두 50 line pairs/mm의 공간 주파수에 70% 정도가 나왔다. 결론: triplet형으로 비교적 저가 보급형 감시용 목적 CCTV 카메라를 설계하였고 충분히 실용적이라 생각된다.

• 전자공학회논문지SC
• /
• 제45권1호
• /
• pp.25-30
• /
• 2008

본 논문에서는 상용 고휘도 백색광 LED 및 CCD 어레이 검파기를 이용하여 Fourier-domain 방식의 광 계측기를 구현하였다. 제안된 기술의 축 방향 측정 거리 범위는 $125{\mu}m$이고, 축 방향 분해능은 $1.24{\mu}m$이다. 기존 시스템이 고가의 광대역 광원을 사용하면서도 분해능이 수 ${\mu}m$ 이상인 것에 비추어 볼 때, 본 시스템은 저가의 상용 LED와 CCD 어레이 검파기를 사용하여 구현되므로 소형이며 가격적인 면에서 유리하면서도 높은 분해능을 얻을 수 있다.

• 산업기술연구
• /
• 제27권B호
• /
• pp.125-128
• /
• 2007

This paper presents Spectral-Domain optical measurement system using self-fabricated CCD sensor driver. The light source is a high brightness white LED and the detector is a 2048 array typed CCD image sensor. I have fabricated the CCD sensor driver to generate four pulse signals, which are the CCD-driving pulses. Using this Spectral Domain optical measurement system, the distance value between the reference mirror and the sample mirror can be obtained successfully.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.504-507
• /
• 2007

The KOMPSAT-2 satellite is a push-broom system with MSC (Multi Spectral Camera) which contains a panchromatic band and four multi-spectral bands covering the spectral range from 450nm to 900nm. The PAN band is composed of six CCD array with 2528 pixels. And the MS band has one CCD array with 3792 pixels. Raw imagery generated from a push-broom sensor contains vertical streaks caused by variability in detector response, variability in lens falloff, pixel area, output amplifiers and especially electrical gain and offset. Relative radiometric calibration is necessary to account for the detector-to-detector non-uniformity in this raw imagery. Non-uniformity correction (NUC) is that the process of performing on-board relative correction of gain and offset for each pixel to improve data compressibility and to reduce banding and streaking from aggregation or re-sampling in the imagery. A relative gain and offset are calculated for each detector using scenes from uniform target area such as a large desert, forest, sea. In the NUC of KOMPSAT-2, The NUC table for each pixel are divided as HF NUC (high frequency NUC) and LF NUC (low frequency NUC) to apply to few restricted facts in the operating system ofKOMPSAT-2. This work presents the algorithm and process of NUC table generation and shows the imagery to compare with and without calibration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.201-204
• /
• 2002

A high accuracy ozone monitor using UV absorption method was developed for ambient ozone monitoring. The system was mainly composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit. The optical signal from the CCD array that provides unusually high response and excellent optical resolution for ozone concentration was converted to digital signal and the digital signal was displayed on screen using PC interface. The optical signal was propagated using optic fiber to reduce optical loss to increase the accuracy of the measuring system. This paper has been studied a interworking signalling protocol between two hybrid networks by analyzing Satellite B-ISDN architecture, DSS2 Layer 3 Signalling protocol, B-ISUP protocol, S-BISUP protocol stack and so on. Also in the paper, messages and primitives have been defined for B-ISDN's Connection Type, Ownership and each protocol in order to connect point-to-multipoint. The ozone sensing properties of the CCD ozone monitor was compared with those of the photo multiplier ozone monitor.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.804-807
• /
• 2006

The SRI(Super Resolution Imager) with 800mm aperture primary mirror is the ground development model of the high resolution satellite camera. The SRI focal plane electronics including detector array generates the data for high-resolution images by converting incoming light into digital stream of pixel data. Since the focal plane including a detector is the basic building block of the camera system, the main system performances is directly determined by its performance. This paper measures the SRI focal plane electronics’ performance such as the dark signal, the dark signal noise, the linearity, the PRNU(Photo Response Non-Uniformity), the SNR(Signal to Noise Ratio) and the sensor saturation capability. In addition, this paper verifies the various functionalities of the SRI focal plane electronics. The electrical test equipment with the specialized software and the optical test equipments such as the integrating sphere, the rotation stage and the target are implemented and used to verify these functionalities and performances.

• 센서학회지
• /
• 제18권3호
• /
• pp.210-216
• /
• 2009

In this paper the tactile sensor system based on the bending loss of optical fiber sensor is presented. The sensor array was designed with fabric structure. The optical measuring system was composed of LED for light source and CCD camera for the signal light detector. Performance of this tactile sensor system was evaluated in various environments and compared with Harmon's design criteria. The result shows that load range is 3 g$\sim$100 g, resolution is 1.5 g, hysteresis error is 1.5%. The response linearity is good and flexibility of sensor array is excellent.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1417-1422
• /
• 2005

Among the sensors mainly used for displacement measurement, there are a linear CCD(Charge Coupled Device) and a PSD(Position Sensitive Detector) as a non-contact type. Their structures are different very much, which means that the signal processing of both sensors should be applied in the different ways. Most of the displacement measurement systems to get the 3-D shape profile of an object using a linear CCD are a computer-based system. It means that all of algorithms and mathematical operations are performed through a computer program to measure the displacement. However, in this paper, the developed system has microprocessor and other digital components that make the system measure the displacement of an object without a computer. The thing different from the previous system is that AVR microprocessor and FPGA(Field Programmable Gate Array) technology, and a comparator is used to play the role of an A/D(Analog to Digital) converter. Furthermore, an ATC(Automatic Threshold Control) algorithm is applied to find the highest pixel data that has the real displacement information. According to the size of the light circle incident on the surface of the CCD, the threshold value to remove the noise and useless data is changed by the operation of AVR microprocessor. The total system consists of FPGA, AVR microprocessor, and the comparator. The developed system has the improvement and shows the better performance than the system not using the ATC algorithm for displacement measurement.